• Journal of Environmental Impact Assessment
• /
• v.30 no.6
• /
• pp.393-412
• /
• 2021

This study examines the assessment systems of LEED v4.1, an eco-friendly building evaluation system in the United States, and SITE v2, an assessment system for sustainable outdoor spaces, and then compares and examines them from the perspective ofrelevant laws and institutional guidelines and standards in Korea. The conclusion is as follows. First, the US eco-friendly certification system basically not only establishes an independent evaluation system according to the field of expertise, but also provides a sustainable city and community through response to the climate crisis and the comfort of the external space environment. It can be evaluated that securing the quality of life of healthy and happy city dwellers is the top priority. Second, Korea's Green Building Certification System (G-LEED) was basically based on the American LEED system, but it was judged that there was a fundamental difference. It was judged that there is a limitation in not being able to achieve an integrated approach through the participation of various expert groups and stakeholders, but also in the accumulation of more scientific and reliable data and information through the application of cutting-edge information and communication equipment. Third, in the case of external space in Korea, a sustainable assessment system has not been established, and not only is it dispersed in various legal and institutional guidelines, but also its effectiveness is judged to be very low. Therefore, it is judged that it is urgent to introduce and secure the applicability of SITES v2, a sustainable outdoor space assessment system in the United States. It was judged that the effectiveness should be secured through the upward adjustment of the minimum Ecological Area Ratio.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.336-343
• /
• 2018

This study was carried out to provide the technology of silvicultural practices and management for regeneration by sprouts in the oak forests distributed on the slope. A total of 1,451 stumps were examined for the following factors relative to the occurrence and growth of the sprouts: stump height & diameter; location & quantity and root collar diameter & height of arisen sprouts. The amount of sprouts deceased or increased as the stump diameter increased. However, it tended to increase with stump height. The difference in the stump height between direction of the upwards (DUS) and downward slopes (DDS) was occurred, because oak trees were felled lower based on direction of the upward for convenience of regeneration works on the slope. The number of sprouts was higher relatively in the stumps of DDS. The rate of arisen side and root sprouts was higher in the stumps of DDS and DUS, respectively. The stump height difference was found to affect the arisen part of sprouts. As a result of comparing the sprouts growth according to the arisen part, there was no difference in the stump of DUS, but the growth of side sprouts in the stump of DDS was higher than that of the root. In order to improve the quality of oak sprouts considering the distribution characteristics of the oak forests in South Korea, it is necessary to apply the silvicultural technique, making the cutting surface parallel with the slope to reduce the stump height difference, to suppress arising side sprouts.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.77-84
• /
• 2022

This study aimed to evaluate the growth, yield, and grain quality characteristics of rice varieties that were subjected to water stress during the tillering stage. We also sought to identify whether water stress could be indicated via the plants' response to chlorophyll fluorescence. In this study, we induced water stress by intentionally cutting off water for 30 days, starting 15 days after transplanting the rice varieties to a greenhouse. We analyzed nine rice varieties, including Ilpum, which is the most frequently cultivated variety in Gyeongsangbuk-do, South Korea. The control group was planted in a paddy field where irrigation was entirely dependent on rainfall. Our results revealed that the heading stage of the nine studied varieties occurred approximately ten days earlier in the rain shelter than in the field. Moreover, the rice yield, head rice rate, and palatability score decreased by 18.6%, 17.1%, and 8.3%, respectively, while protein content increased by 20.2% compared with the control group. The Saenuri and Haimi varieties showed the lowest reduction in yield under the water stress conditions, while the Daebo and Samkwang varieties showed the highest reduction in yield. The chlorophyll fluorescence response after re-irrigation was measured between July 30^th and August 17^th. The ratio of variable fluorescence to maximum chlorophyll fluorescence (F_V/F_M) values failed to recover to their baseline values, resulting in either no change or a reduction in fluorescent response, even after re-irrigation of Daebo and Samkwang varieties. These results can be utilized as empirical data for drought-affected farms to select resistant varieties that can respond to spring drought in the southern plains of Gyeongsangbuk-do.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.127-137
• /
• 2022

Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.

• Korean journal of food and cookery science
• /
• v.11 no.4
• /
• pp.356-361
• /
• 1995

This study was conducted to know the quality of marketed green teas which were devided into high, middle and low grade according to the price. we examined the content of water, ash, total nitrogen, tannin, caffeine, chlorophyll and color value and did sensory evaluation. The results were as follows: 1) The content of water was 2.17-3.67％ and content of ash was 4.50-5.17％, there were no significant difference in each grade. 2) The content of total nitrogen was 4.38％ in high grade, 4.60％ in middle grade and 4.68％ in low grade. 3) The content of tannin was 11.09％ in high grade, 14.22％ in middle grade and 14.44％ in low grade, middle and low grade were significantly higher than high grade. 4) The nitrogen rate to tannin (N/T) was 39.5％ in high grade, 32.6％ in middle grade and 32.70％ in low grade, N/T rate of high grade was significantly highest than others. 5) The content of caffeine is 1.78％ in high grade, 1.32％ in middle grade and 0.92％ in low grade, high and middle grade were significantly higher than low grade. 6) The content of total chlorophyll is 297.37 mg％ in high grade, 192.89 mg％ in middle grade and 204.79 mg％ in low grade, chlorophyll a was 69.23 mg％ in high grade, 51.99 mg％ in middle grade and 63.42 mg％ in low grade, and chlorophyll b was 228.47 mg％ in high grade, 131.21 mg％ in middle grade and 141.63 mg％ in low grade. 7) Yellow value of high and middle grade were significantly higher than low grade, but blue and red value were no significant diffrence in groups. 8) In sensory evaluation, appearance, taste, odor of high grade were better than others and total score was 15.25 in high grade, 12.97 in middle grade and 9.80 in low grade. 9) Price had a positive correlation with caffeine, appearance and taste, but a negative correlation with tannine. NT rate had a negative correlation with tannine, but a positive correlation with caffeine.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.737-744
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties during preparation of Yukwa. Protein content of glutinous rice was decreased during soaking time and acid and pH values were increased while contents of lipid and ash were not changed. Particle size distribution showed thate average particle size of 7 days soaking treatment smaller than those of 3 days and starch damage of glutinous rice flour was increased during soaking time. The major flavor components after soaking were found ethyl ester acetic acid, ethanol, 2-butan -ol, 2-methyl 1-propanol, 1-butanol, 3-methyl 1-butanol and 1-pentanol, propanoic acid. Content of acetic acid and butanoic acid were rapidly increased during soaking time. Results for ratio of storage modulus(G') and loss modulus(G') in glutinous rice flour dough indicated $tan{\delta}$ was increased for a while and decreased as frequency increased. G' value was very similar with G' value after steaming which means rubber-like property while G' and G' value were changed after during storage time. Treatment at $-20^{\circ}C$ had the highest hardness for cutting degree of dough. There was no difference in color value between different water contents. Hardness of Bandegi (sheet) was decreased as water content increased and the highest popping value was obtained at 18% of water contents. Adding 3% soaked bean had higher redness value of Yukwa and lower value in yellowness.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.406-411
• /
• 2011

This study was conducted to find out the effect of cut-off period (0 hour, 3 hours, 6 hours, 12 hours, and 24 hours) to supply nutrient solution for chicon forcing at that was predrying treatment on the storability of chicon. The cut-off treatment increased dry matter rate, respiration rate, and ethylene production rate. The dry matter rate of chicon increased, as the cut-off period increased, but the respiration rate and ethylene production rate of chicon was highest in 12 hours and 6 hours cut-off treatment, respectively, and then their rates decreased, as the cut-off period prolonged. The weight loss at cut-off 6 hours treatment was lower than other treatments during $10^{\circ}C$ storage temperature. The cut-off 6 hours treatment showed higher carbon dioxide and oxygen concentration in 10,000 cc/$m^2$/day/atm oxygen permeability film package during storage period than control and showed a little predrying effect but was not statistically significant. At $4^{th}$ day, the ethylene concentration reached higher than other storage day and after that decreased but was not statistically significant. The quality of chicon for 3 hours, 6 hours, 24 hours cut-off treatments on storability showed higher than other treatments, accordingly. The 6 hours cut-off treatment showed the inhibited effect of the degree of browning of chicon cutting plane. The effect of 6 hours cut-off treatment on storability of chicon showed proper predrying effect, reduced moisture loss and browning inhibition apparently during $10^{\circ}C$ storage.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.252-260
• /
• 2009

Whereas the numbers of childcare centers and kindergartens are increasing rapidly, systematic management to control the food safety of foodservice operation is not yet well established. Samples from 12 centers in Seoul and Gyeonggi Province were collected to assess the microbiological quality of 32 raw materials, 24 cooked foods, 76 food-contact surfaces (knives, cutting boards, dish towels and gloves), 17 employees' hands and 12 air-borne bacteria. The microbiological analyses were performed for aerobic plate counts (APC), Enterobacteriaceae, E. coli and 7 pathogens (B. cereus, C. jejuni, C. perfringens, L. monocytogenes, Salmonella spp., S. aureus, and V. parahaemolyticus). Among raw materials, E. coli ($1.39{\sim}2.08\;\log\;CFU/g$) were detected in 4 out of 6 meats and 7.46 log CFU/g of APC in tofu. High enterobacteriaceae levels of 4.23, 5.14 and 4.19 log CFU/g were found in cucumber salad, steamed spinach with seasonings and steamed bean sprout with seasonings, respectively. No pathogens were found in all samples except for C. perfringens detected from raw spinach and raw lotus root. Only APC and enterobacteriaceae were found in food-contact surfaces. Two of the 23 knives and three of the 24 kitchen boards showed over 500 CFU/$100\;cm^2$ of APC; also, APC levels (5.03 to 5.44 log CFU/g) were detected in 4 of the 12 dish towels. Only one glove showed Enterobacteriaceae (2.44 log CFU/glove) contamination. Enterobacteriaceae were found in 2 employees' hands ($2.37{\sim}4.44\;\log\;CFU$/hand) among the 16 employees. The contamination levels of air-borne bacteria were shown unacceptable in two (2.25 and 2.30 log CFU/petri-film/15 min) out of the 12 kitchen areas. These results suggest that the microbiological hazards in some foods and environments are not well controlled and thus a guideline should be provided to ensure the food safety in childcare center and kindergarten foodservice operations.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.30-41
• /
• 1976

The workers involved in breeding the growth of forest trees as well as in the efficiency of breeding work wish to find out the evidence that juvenile-mature correlations are high and that therefore early tests can be profitably employed in relation work. Juvenile-mature correlation denotes in general sense the interdependence between qualitative or quantitative data collected at different intervals during the life cycle. The correlation can also be obtained through the stem analysis if there is the possibility of cutting sample trees needed amount. In the present study, the juvenile-mature correlation coefficients are calculated from the stem analysis data. The every possible values of correlation coefficient between the 5-year age groups as to diameter, height, and volume growth of Pinus koraiensis S. et Z. and Larix leptolepis Gord. grown in the middle district of Korea were calculated. All the sample trees were cut from the man made plantation. The correlation coefficients are presented in tables and figures. In Pinus koraiensis S. et Z., the values of correlation coefficient between the successive age groups of heights growth are lower in general than those values pertaining to diameter growth. This tendencies are indifferent to site quality. In Larix leptolepis Gord., the values were lower thant these of Pinus koraiensis S.etZ. In any species and characteristics studied, the implications that at least 15 years growth character are related to 35 or 40 years size with reliability could be deduced. Through the relative ranking studies of diameter, height and volume growth of Larix leptolepis Gord., the large varieties among individual trees are appeared during 5-year to 35 year old.