• 동력기계공학회지
• /
• 제20권5호
• /
• pp.5-13
• /
• 2016

This study is on wear damage of the material for a molding machine that be used at finally cutting of metal beam made in roll forming process of vehicle bump beam process line. SKD11 steel was used with the material for cutting mold jig. In the cutting mold jig, Ti diffusion heat treatment after vacuum heat treatment was carried out for upgrade of surface hardness and anti-wear. Also, the heat treatments by various methods were performed to compare the wear damage degree against above the existing heat treatment. Wear loss and friction coefficient were obtained from wear test. And, micro Vickers hardness values were compared with damaged parts or not of cutting mold jig. Micro Vickers hardness value appeared higher at the undamaged part by Ti diffusion heat treatment. The micro Vickers hardness well followed a two-parameter Weibull probability distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.179-180
• /
• 2007

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2567-2572
• /
• 2014

본 연구개발은 PCB소자 분리에 있어 개별적 레이저 커팅의 문제점을 개선하는 것으로, 다수개의 PCB소자가 결합된 PCB시트를 단시간에 커팅 할 수 있는 멀티지그 개발이 목적이다. 설계는 베이스프레임에 PCB서포터가 안착, 모델별 PCB서포터가 분리가능하게 설계 하였으며, 상부 레이저 투과공의 고정을 위하여 네오디움 자석을 양쪽에 각각 채택 지그를 완료 하였다. 개발성과는 하나의 베이스프레임으로 다양한 규격의 PCB소자 및 모듈의 고정과, PCB소자에 연결된 브릿지의 컷팅작업이 가능하도록 설계, 프레임제작과 교체에 소요되는 시간과 비용을 줄여 생산원가의 절감형 지그 개발로, 기존 타발식에 비해 정밀도 약 70% 상향 및 시설 투자비 약 400%를 절감하였다.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.37-47
• /
• 2004

The processes of manufacturing FRP sewage disposal tanks are very dangerous and hazardous jobs for workers because of large size and heavy weight of the tank, toxic fiberglass dust, nasty smell, and dangerous tools such as hand-grinders. This paper introduces an automatic manufacturing system of the FRP sewage disposal tank to enhance the safety of workers. The system consists of 3 components: the FRP body rotation jig, the automatic manhole cutting machine, the automatic sanding processing machine. The safety of workers and working environment are greatly improved, because the dangerous jobs are automatized and the toxic fiberglass dust is automatically collected. Also, the productivity is greatly improved and the cost is reduced.

• 소성∙가공
• /
• 제14권3호
• /
• pp.200-206
• /
• 2005

In general, a lot of small electrode is needed for making precision injection molds, such as cell phone mold and precision connector mold, because of the limitations of NC milling process. Those small electrodes usually have very simple shapes and the actual cutting time is so short, but many NC programs and set-up process, a very complicated and time consuming Job, are needed for each electrode. This paper deals the method for increasing the productivity of machining electrodes. In this work, the process standardization of machining electrode was done and special jig fer machining small electrodes was developed. Automatic tool path optimization software was also developed to minimize tool changing time. In addition, in-line cutting tool measuring system was adopted. The productivity of machining for small electrode has been increased up to $100\%$.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.119-129
• /
• 1995

In this paper, the inclined endmilling process with a 3-axis machining center using inclined jigs is introduced for the purpose of reducing overall Dies/Molds machining time and improving the machining accuracies. In order to analyze the cutting mechanism of a given endmill more accurately, the unification of the cutting mechanism model of 3-different- kind endmills is carried out by using a nose radius as a parameter. By adding radial runouts as a parameter which influences on surface roughness, the superposition method which defines the effective cusp height superposing the cutter mark height and the conventional cusp height is advanced. And 3-D suface topography predicted in this paper looks like the surface normally observed in practice. Through machining experiments, the adequacy of the superposition method was confirmed.

• 한국융합학회논문지
• /
• 제11권6호
• /
• pp.197-201
• /
• 2020

LCD BLU의 CCFL 전극에 사용되는 몰리브덴 전극의 주요소재인 몰리브덴 컵과 몰리브덴 핀은 국내 가공기술이 개발되지 못하여 전량 일본에서 수입하여 사용되고 있어 CCFL 제조업체들의 납기 및 경쟁력에 부담을 주고 있다. 본 연구에서는 LCD BLU의 CCFL 전극에 사용되는 몰리브덴 핀의 제조 기술을 개발하는 연구로 직선처리 기술개발, 몰리브덴 와이어 표면처리 기술개발, 와이어 절단기술 개발, 몰리브덴 핀의 제작, 검사용 JIG와 Fixture 설계 및 제작, 몰리브덴 핀 시제작 및 해석, 몰리브덴 핀 전수검사 기술개발에 관한 연구를 수행하였으며 본 논문에서는 몰리브덴 핀제작 및 검사용 JIG and Fixture의 설계 및 제작에 대한 연구를 다루고자 한다.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.98-104
• /
• 2012

In this paper, precision processing is carried out for the pre hardened steel(HRC 54), which is one of injection mould materials. Processing characteristics are estimated according to the number of tool cutting blade and roundness is observed by the 3-Dimensional measuring machine. The surface roughness affected by the wire electric discharge machining are measured. Cutting component force of STAVOX is the highest in condition of 2F processing because load per a blade of cutting tool is high. Especially, the difference in Fz is over 20N by cutting load. The slower spindle rotation speed and tool feed rate are, the better cutting component force is. The roundness of hole processed in condition of 4F is good because feed rate is able to be fast. When rotation speed is increased, the surface roughness is decreased. The surface roughness acquired in condition of 2F processing is higher about 50% than 4F processing.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.65-70
• /
• 2018

M152, used for aircraft engine compressor cases, causes many problems in the cutting process due to its high hardness and high toughness. Characterized by a concave cylindrical center, aircraft engine compressor cases are thin but have multiple side holes to connect with internal parts. Thus, deformation occurs despite the jig sustaining the inside. The object of this study was to lessen the deformation arising from drilling by improving the drilling jig for aircraft engine compressor cases. To this end, an aircraft engine compressor case modeled with SolidWorks was analyzed with ANSYS under real conditions. Then, to secure reliability, the analyzed deformation was compared with the actual deformation. Based on the results, the effects of the improved drilling jig for aircraft engine compressor cases were verified.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.32-38
• /
• 2021

Plate-shaped works are one of the materials that can be applied to the entire industry due to their various shapes and sizes. Plate-shaped parts workpieces are thin and wide, and when processing is completed, they are often bent or deformed in various directions, making it difficult to produce normal products. In particular, this study intends to study the processing deformation and distortion of plate-shaped parts fastened to the jig during milling processing. In this study, a method for preventing deformation occurring in plate-shaped parts was derived through jig element change and CAE analysis, and this was applied to actual processing to produce products with stable dimensions. Through a finite element analysis experiment, it was found that installing two supports on the back of the plate-shaped part results in minimal deformation and the optimal distance between the two supports is 150 mm. Through this experiment, when processing a thin plate product, a support was installed in a direction opposite to the cutting force applied to the thin plate to prevent deformation of the product, thereby improving defects.