• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.275-284
• /
• 2012

This study was carried out to determine the harvest management during autumn on the forage production, quality and regrowth of following year of Phragmites communis as native grass. Field experiments were conducted in Ansan and in Cheonan from 2010 to 2011. Forages were cut at 3 cm, 15 cm and 25 cm in height as compared to control (no harvest) in Ansan plots, and forages grown in Cheonan plots were cut at 10 cm and 20 cm in height with control (no harvest). The forages were harvested one time on Oct 7, 2011 in Ansan, and were harvested twice on July 7 and on October 7 in Cheonan. In Ansan, dry matter (DM) yield of control plot the following year were higher than those from harvested plots. In vitro digestible DM (IVDDM) yields, however, were the same: 1,236 kg/ha from control, 1,234 kg from 15 cm cut and 1,241 kg from 25 cm cut plots, except that lower IVDDM yield from 3 cm cut plot than these were observed. Forage quality of control plot was poorer than those of harvested ones. In vitro DM digestibility (IVDMD) and relative feed value (RFV) of control were 39.98% and 65.3, respectively as compared to harvested plots (42.36~46.40% IVDMD and 67.8~72.5 RFV). Yield and quality from Cheonan plots were similar to those from Ansan plots. Annual yield in DM and in CP from control plot were a little higher than those from harvested plots. However, there were no difference found in IVDDM yield between 20 cm cut (5,354 kg/ha) and control (5,178 kg). But IVDDM of 10 cm cut forages was less (4,531 kg). Forage quality scores were better from 20 cm cut, and 10 cm cut plot than control, in order (p<0.05). The quality grades were the 5th and 6th for forages from harvested plots and control plot, respectively. Regrown Phragmites communis from all Cheonan plots ranked the 4th in forage quality. More than 70% of annual yield was observed from the first grown forages. One time harvest per year was desirable for following regrowth and long time stable production of Phragmites communis. We recommended that Phragmites communis be harvested once for more forage yield with higher quality, and that optimum cutting height is 15~20 cm.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.68-78
• /
• 1999

Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.65-65
• /
• 1999

Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32℃ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11c
• /
• pp.85-94
• /
• 1999

Reinforced Soil Wall has several merits comparing with conventional retaining wall. The conventional method has the limit of wall height, ununiform settlement of the foundation ground, quality assurance of the embankment body, shortening of construction period, economical construction and so on. Basis of previous mentioned things reinforced soil wall is the substitutional method of conventional retaining wall and its necessity is continuously increasing. The embanking material used in reinforced soil wall is generally limited such as a good quality sandy soil, and in many case constructors have to transfer such a good embanking material from far away to construction site. As a result, they would pressed by time and economy. If poor soils could be used embanking material, for example, clayey soil produced in-situ by cutting and excavation, the economical merit of reinforced soil wall would be increased more and more. Likewise, a lot of study about laboratory experimental behavior of reinforced soil wall using a good quality soil is being performed, but is rare study about clayey soil containing much volume of fine particle relatively in korea. In this study, the authors investigated behavior of the geosynthetic reinforced and unreinforced soil walls using clayey soil as embanking material in view of horizontal movement of walls, bearing capacity and reinforcement stress.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.13-20
• /
• 2005

This study was conducted to suggest the ecological restoration methods of the decomposed granite cut-slope by organic soil amendment materials. Field test carried out for the cut-slope with organic soil amendment materials method and other three revegetation methods in Cheongwon. Test revegetation plants were Festuca arundinacea, Lolium perenne, Dactylis glomerata, Lespedeza cyrtobotrya, and Arundinella hirta. The result of this study can be summarized as follows; 1. The soil hardness, the soil acidity, and the soil humidity of organic soil amendment materials method were at a suitable value for plants growth. And it was better as compared with other three revegetation methods of cutting-rock slopes. 2. The result of toxic substance investigation, all items were at a suitable for standard law. 3. During one year after seeding, most plants germinated and especially Festuca arundinacea and Dactylis glomerata grows well. Seedling numbers were 336.7 per $m^2$(after 6 months), 183.3 per $m^2$(after 10 months), and 353.3 per $m^2$(after 6 months). Ten months later after seeding, plants showed 80% ground coverage. Visual rate, plant height, and growth rate were excellence, Also, high plant growth in spring better than autumn.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.33-39
• /
• 1988

Insufficient herbage during the fall in the temperate areas of the world has been a serious limitation in animal production, but leafy brassicae are potentially very useful for extending the grazing season when the growth and quality of grass is poor. This study was conducted to determine the effects of cutting stage and N fertilization on dry matter (DM) yield, forage quality and chemical composition of forage rape (Brassica napus Subsp. oleifera). The experiment was conducted in the Experimental Livestock Farm of Seoul Nat'l Univ., at Suweon, during 1985- 1986. The results obtained are summarized as follows: 1. DM percentage and yield significantly increased as the growth period was prolonged and decreased as the N fertilization increased, but in-vitro dry matter digestibility (IVDMD) was unaffected by the treatments. 2. Plant height, DM yield and $NO_3$-N content significantly increased as the rate of N fertilization increased and DM percentage decreased, but the IVDMD was unaffected. 3. The forage rape had high percentage of crude protein and ash. Glutamic acid, pro!ine and aspartic acid were the major amino acids. Concentration of P, Ca and Mg were high.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.896-902
• /
• 2005

An orthopedic surgeon normally gets the operational parameters of total knee arthroplasty from medical images(CT, MRI). Anatomical axis, mechanical axis, the width and height of femur, or tibia are the most important parameters related with accomplishment of TKA. This paper presents a methodology of simulation that virtually operates TKA according to 2D medical images. Using this simulator, some important parameters for operation can be achieved before hand. The simulator provides the 3D computational model of a knee joint and then derives the proper size of implant corresponding to the joint. The whole process of TKA can be simulated such as clipping a knee joint, assembling the joint and its implants, visualizing all the operation steps, deriving some crucial parameters such as anatomical axis and cutting thickness, and predicting the result of TKA. Some examples are given and discussed to validate the methodology.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1252-1252
• /
• 2001

The aim of this study was to evaluate the possibility to characterize and classify waxes applied on some type of cheeses to obtain good stability during handling and transportation. Generally, waxes are obtained from the petrochemical industry, nowadays there is the possibility to also use biodegradable waxes produced from microorganisms. Preliminary studies were carried out to optimize sample presentation in NIR analysis, such as melting conditions (influence of temperature) and coat thickness of wax. 12 waxes (biodegradable or not) were analysed by using an InfraAlyzer 500 (Bran+Luebbe). The sample size was performed cutting pieces of 1.5 cm (height) x 1.5 cm (width) x 1.5 mm (thickness), previously melted at 9$0^{\circ}C$. NIR spectra were collected at room temperature, and data were processed by Sesame Software (Bran+Luebbe) to evaluate qualitative differences among samples by cluster analysis. Waxes were gathered on the basis of their origin (petrochemical or microbial). To better understand the significance of the NIRS bands discriminating among waxes, a two-dimensional correlation with FT-IR spectra, collected by a FT-IR/ATR 420 (JASCO) instrument, was made using 2DCORR program (Galactic Industries). On the basis of its classification power, NIRS appears to be a promising tool when used in routine analysis for a qualitative control of raw materials.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1996

The purpose of this study was an analysis of the elementary school child's attitude and dangerous factors of play apparatuses n elementary schools. The results were summarized as follows; 1. 53.0% of the reply child thought that play apparatuses were dangerous, and 41.0% of the total reply had experienced accidents by apparatuses, the child under 10 had experienced the accidents manytimes. 2. The types of injuries most frequently occurred are falls from play apparatuses, and part of the body most frequently injured parts of the body are arms and legs. 3. The danger of fall in play apparatuses that is over 3M amounted 19.6%, it asked safety of bottom materials. 4. Destructed play apparatuses reached up to 20.0%, and rusted or decomposed apparatuses reached to 28.4%. 5. The distance of each apparatus were very close ; it was within 0.3~1.5M, which was 24.9%, it was very dangerous factor. 6. The most frequent hazards of educational play apparatuses are ; - inappropriate size of apparatuses(height, gap, thick etc.)- inappropriate shape and finished state(bad welding and cutting, projection part etc.)- unsuitable use of bottom material in playground and safety color.- insufficient use zone.-inappropriate maintenance and inspection(endurance passage, erosin of iron-ware and wooden ware, projection of foundation concrete)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.1-6
• /
• 2018

Micro prism pattern is applying in order to get increase of luminance, control the light, and so forth especially in optics and display industry. Most patterns are fabricated by lithography, planning, and EDM, but they have limitations on the productivity or the unit cost of produce. However, ultra precision mold is one of the processes able to replace it, and assure high productivity required by industries. In this investigation, micro prismatic end-milling is suggested in order to fabricate the pattern effectively. Micro prism pattern having $100{\mu}m$ of pitch and height was machined on STD-11. After machining, the flank and boundary wear on micro end mill were measured and analyzed, as well as burr formation and dimensional accuracy of fabricated pattern were evaluated. Thus the optimal cutting conditions were derived.