• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.37-46
• /
• 2024

The city is developing into a smart city. Smart villages and smart farms are developing in rural areas. Architectural technology needs synergy with smart cities, smart villages, and smart factories (intelligent factories) to help architectural experts understand smart farms and build facilities and equipment. Smart farms require design and construction technology with architectural structure and function. The purpose of this study was to investigate the current status and cases of smart farms in Korea and to investigate cases abroad. The conclusion is as follows. ① Smart farms are developing rapidly. The Korean government is expanding smart farms by utilizing ICT technology and infrastructure. ② 'Smart Farm Innovation Valley', which has been promoted since 2018, is a cutting-edge convergence cluster industrial complex that integrates production, education, and research functions such as start-ups and technological innovation. ③ In domestic cases, smart farms are operated in subway stations, buildings, supermarkets, and restaurants. ④ In the Japanese case, a dome-type smart farm was being operated. It utilized factory wastewater, waste heat, renewable energy, and used new materials. Otemachi Ranch raised livestock and provided a lounge on the 13th floor of the building. ⑤ In the cases of Korea and Japan, the smart farm technology is very similar. As stated earlier, since the food culture and agricultural technology of both countries are similar, we hope to promote the development of smart farms that can reduce concerns about future food by communicating and sharing mutual technologies.

• Geomechanics and Engineering
• /
• v.37 no.1
• /
• pp.65-72
• /
• 2024

Water ingress poses a common and intricate geological hazard with profound implications for tunnel construction's speed and safety. The project's success hinges significantly on the precision of estimating water inflow during excavation, a critical factor in early-stage decision-making during conception and design. This article introduces an optimized model employing the gene expression programming (GEP) approach to forecast tunnel water inflow. The GEP model was refined by developing an equation that best aligns with predictive outcomes. The equation's outputs were compared with measured data and assessed against practical scenarios to validate its potential applicability in calculating tunnel water input. The optimized GEP model excelled in forecasting tunnel water inflow, outperforming alternative machine learning algorithms like SVR, GPR, DT, and KNN. This positions the GEP model as a leading choice for accurate and superior predictions. A state-of-the-art machine learning-based graphical user interface (GUI) was innovatively crafted for predicting and visualizing tunnel water inflow. This cutting-edge tool leverages ML algorithms, marking a substantial advancement in tunneling prediction technologies, providing accuracy and accessibility in water inflow projections.

• Journal of Korean Clinical Health Science
• /
• v.12 no.1
• /
• pp.1668-1677
• /
• 2024

Objective: This study investigated the awareness of occupational therapy in the community in occupational therapy majors through a survey. This purpose is to investigate the awareness of occupational therapy in the community among occupational therapy majors and establish a theoretical foundation. Methods: The research subjects were surveyed among occupational therapy majors at M University living in Gyeongsangnam-do, and analyzed 141 questionnaires from September 2023 to December 2023. Results: The results of this study that education and awareness improvement are needed to increase awareness of occupational therapy in the community, and it was found that continuing education and case sharing are effective. Activation of home rehabilitation and continuous health management. This institutional development can induce employment activity through community rehabilitation, and activate programs in connection with adult day care centers. For the development of community occupational therapy, participation in education and development of customized treatment are necessary, and patient It should be developed to help with movement and movement, and it has been shown that it can also affect the quality of life of patients. In addition, cutting-edge technologies such as artificial intelligence are expected to be applied to remote support, telemedicine, etc., and are applied to dementia, cognitive patients, and central nervous system patients. In order to institutionalize occupational therapy in the community, it is helpful in daily life, nursing, and management. It was said that this would be helpful for community participation. Conclusion: This study investigated the awareness of occupational therapy in the community among occupational therapy majors. Education and awareness improvement are needed to increase awareness of occupational therapy in the community. Education to improve the professionalism of occupational therapists, strengthening connectivity with other majors, and local organizations. It is believed that collaboration with the local community and institutional supplementation tailored to the needs of the local community were necessary.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.345-362
• /
• 2024

MRI plays an important role in abdominal imaging because of its ability to detect and characterize focal lesions. However, MRI examinations have several challenges, such as comparatively long scan times and motion management through breath-holding maneuvers. Techniques for reducing scan time with acceptable image quality, such as parallel imaging, compressed sensing, and cutting-edge deep learning techniques, have been developed to enable problem-solving strategies. Additionally, free-breathing techniques for dynamic contrast-enhanced imaging, such as extra-dimensional-volumetric interpolated breath-hold examination, golden-angle radial sparse parallel, and liver acceleration volume acquisition Star, can help patients with severe dyspnea or those under sedation to undergo abdominal MRI. We aimed to present various advanced abdominal MRI techniques for reducing the scan time while maintaining image quality and free-breathing techniques for dynamic imaging and illustrate cases using the techniques mentioned above. A review of these advanced techniques can assist in the appropriate interpretation of sequences.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.4
• /
• pp.245-264
• /
• 2024

Computer-controlled local anesthesia delivery (CCLAD) is an innovative electronic injection device that represents a cutting-edge approach to dental anesthesia. This system is promising for painless anesthesia using controlled anesthetic injections. This review aimed to compare the discomfort experienced by patients during local anesthesia using a traditional syringe and the CCLAD system and evaluate the potential of the CCLAD system as a painless dental anesthesia solution. The inclusion criteria for this study were based on the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines. The study population, including children and adults, underwent dental anesthesia using the CCLAD system, ensuring a comprehensive and representative sample that instills confidence in the validity of the results. Fourteen clinical trials were included in the analysis after they fulfilled the eligibility criteria. We found that using computer-assisted anesthetic equipment not only led to a significantly lower pain perception score, but also had a profound positive impact on patient behavior. Patients using the CCLAD device exhibited more cooperative and helpful conduct, indicating the system's effectiveness in improving patient comfort and experience and reassuring the audience about its positive impact. In conclusion, using a computer-assisted anesthetic device such as the CCLAD system significantly reduced pain perception scores and improved patient behavior, making them more cooperative and helpful. These findings offer hope for pediatric dentistry and apprehensive adult patients, suggesting a more comfortable and less daunting dental experience with the CCLAD system.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.471-482
• /
• 2024

Modular construction, a prominent method in the evolving construction industry, necessitates robust quality control for successful implementation. This study investigates the potential of 3D scanning technology for enhancing quality control processes in modular building construction. Through an IPA analysis of major construction projects across factory production, transportation, and on-site stages, the study evaluates the current state of 3D scanning application in modular construction quality control. Results indicate a high demand for 3D scanning data across various quality control aspects. However, certain limitations in technology and practical application were identified. The findings of this research contribute to the advancement of 3D scanning technology in modular construction and inform future research on cutting-edge quality control strategies.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.117-128
• /
• 2021

In order for the users (shipping firms and shippers) and suppliers (stevedoring firms) in the container terminal industry to win-win, it is necessary to have some appropriate diverse market conditions for the industry. This study analyses the basic conditions and demand and supply characteristics of the industry and investigates the market performance of Busan container ports. First, this article analyses the basic characteristics of demand and supply. As the demand characteristics, there are five ones such as 1) exogeneity of demand, 2) function as export/import transportation and hub for transshipment, 3) increase of users' bargaining power, 4) high substituting elasticity, 5) reduction of volume growth. As the supply characteristics, there are seven ones such as 1) inelasticity of supply, 2) homogeneity of stevedoring services, 3) over-supply, 4) adoption of cutting-edge stevedoring technology, 5) scale economy and impossibility of storage, 6) labor market rigidity, 7) enhancing port's role in SCM. In addition, this study conducts the so-called structure-conduct-performance analysis. For the structure analysis, 1) lacks of scale economy in stevedoring companies, 2) high entry barrier, 3) strengthening of shipping firms' bargaining power, 4) transitory permission scheme for tariff are analyzed. For the conduct analysis, 1) price discrimination between export/import and transshipment, 2) mid-term length of terminal use contract, 3) continuous investment in equipment, 4) low level of cooperation among terminal operating firms are derived. For the performance analysis, 1) inequality in profitability, 2) reduction of export/import cost, 3) delay in adopting cutting-edge technology, 4) idle equipment are analyzed. Following this logical flow, the hypothesis that the market structure influences the market conduct is tested based on the actual dataset. As a future agenda in the conclusion, this article recommends the so-called port industrial policy.

• International Journal of Oral Biology
• /
• v.32 no.1
• /
• pp.13-22
• /
• 2007

The stem cell research is emerging as a cutting edge topic for a new treatment for many chronic diseases. Recently, dental stem cell would be possible for regeneration of tooth itself as well as periodontal tissue. However, the study of the cell characterization is scarce. Therefore, we performed the genetic profiling and the characterization of mouse fetus/neonate derived dental tissue and cell to find the identification during dental development. We separated dental arch from mandibles of 14.5 d fetal mice and neonate 0 d under the stereoscope, and isolated dental cells primarily from the tissues. Then, we examined morphology and the gene expression profiles of the primary cells and dental tissues from fetus/neonate and adult with RT-PCR. Primary dental cells showed heterogeneous but the majority was shown as fibroblast-like morphology. The change of population doubling time levels (PDLs) showed that the primary dental cells have growth potential and could be expanded under our culture conditions without reduction of growth rate. Immunocytochemical and flow cytometric analyses were performed to characterize the primary dental cell populations from both of fetus (E14.5) and neonate. Alpha smooth muscle actin (${\alpha}-SMA$), vimentin, and von Willebrand factor showed strong expression, but desmin positive cells were not detected in the primary dental cells. Most of the markers were not uniformly expressed, but found in subsets of cells, indicating that the primary dental cell population is heterogeneous, and characteristics of the populations were changed during culture period. And mesenchymal stem cell markers were highly expressed. Gene expression profile showed Wnt family and its related signaling molecules, growth factors, transcription factors and tooth specific molecules were expressed both fetal and neonatal tissue. The tooth specific genes (enamelin, amelogenin, and DSPP) only expressed in neonate and adult stage. These expression patterns appeared same as primary fetal and neonatal cells. In this study we isolated primary cells from whole mandible of fetal and neonatal mice. And we investigated the characteristics of the primary cells and the profile of gene expressions, which are involved in epithelial-mesenchymal interactions during tooth development. Taken together, the primary dental cells in early passages or fetal and neonatal mandibles could be useful stem cell resources.

• Korean Journal of Environment and Ecology
• /
• v.17 no.2
• /
• pp.144-152
• /
• 2003

The purpose of this study was to investigate the effects of lime fertilization and light intensity on beech regeneration strategy in a mature beech forest(ca. 150 years old) gaps, which was located in the soiling areas Germany, where the soil is an acid brown earth. For the experiment canopy gaps of 30m diameter were cut, and one canopy gap remained as untreated while the other was limed(3t dolomite h $a^{-1}$). Soil chemistry, soil water potential, light intensity(PAR), ground vegetation, beech seedlings and mycorrhiza were investigated along transect from the stands into gaps to the north. The results of this study are followings: 1) In the limed gap, soil chemistry was greatly improved and a vigorous herb layer developed as compared to the unlimed gap. 2) Development and growth of the beech seedlings in the unlimed gap were generally deficient. Specially, developments of lateral roots were very lack. 3) Through the lime fertilization, the minerals contents of beech leaves such as calcium(Ca) and magnesium(Mg) were increased, while manganese(Mn) was decreased. There was antagonism between potassium(K) and calcium(Ca) or magnesium(Mg). 4) The relative mycorrhiza frequency(RM) in beech seedlings of the southern edge was very higher than that of the middle part, and through the lime fertilization extension of the species Laccaria amethystina appeared clearly. The results of this study showed that lime fertilize in forest, where the soil is acid, will be necessary..