• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.95-102
• /
• 2020

The purpose of this study is to seek a new understanding of human beings by examining, through the various types of futuristic humans in SF narratives, the changes of human condition and identity, raised by the discussion on the posthuman today. The rapid development of science and technology blurs the line between humans and machines, predicting the birth of the 'new human posterior to the human'. The advancement of technology enables the production of 'human beyond the biological human' through the combination of humans and machines, and humans are becoming more mechanized. On the other hand, machines are gradually developing to the stage of resembling not just the exterior body structure, but the thinking abilities and emotions of human beings. However, by colliding with the traditional view of human beings, artificial changes to the human condition as a result of cutting-edge technology demand a new perspective on the meaning of a new being and changes in human conditions. Therefore, the study examines how human conditions and perceptions have changed in accordance with the evolution of science and technology, and then explores the direction of co-evolution between humans and machines through the various types of futuristic humans that appear in the SF narratives, as well as the potential of futuristic humans as the new subject.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.265-281
• /
• 2022

A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.35-46
• /
• 2022

While the construction of dismantling the old industrial complex and restoring the dismantled industrial site to its original natural environment the is underway. In this paper, we introduce a case of dismantling a turbine building which one of the a large steel frame structures in an old industrial complex by applying the progressive collapse method among the blasting demolition methods. We used a charge container that generates a metal jet to cut dismantling the turbine building. The thickness of the steel structure was adjusted to 30 mm or less by applying gouging, which was a method of digging deep grooves by gas and oxygen flames or arc thermal, in the part where the cutting thickness was thick in the blasting section. The total amount of charge used for the blasting of turbine building was 175 kg, 165 electronic detonators and 124 charge containers. As a result of the blasting demolition, the turbine building was collapsed precisely according to the estimated direction. The blasting demolition was completed without causing any damage to the surrounding facilities.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.2
• /
• pp.97-122
• /
• 2011

After global economic crisis, most countries increased the welfare expenditure as a part of stimulus package. As a However welfare expenditure was decreased radically as the crisis was transmitted into the financial crisis. Which turning point is the welfare state going through now? Although the need for the welfare and the role of the state to take responsibility of public welfare has increased because of poverty and polarization, responses of the state against the crisis had focused on the aid to the financial industry and cutting taxes and showed limitations in coordination. Financial limitation of welfare expenditure, political individualism, the change of class politics and the mixture of the welfare institutions and financial institutions make have a pessimistic prospect of the retrenchment to the minimalist welfare state. As neoliberal state is continued cash benefits mainly for the middle class is being decreased. As a result, the direction the welfare states pursue is prospected to win over the poor by strengthening selectivity in welfare provision rather than class coordination.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.618-638
• /
• 2022

The Middle Jurassic granite dike swarm intruding into the Paleoproterozoic banded gneiss is pervasively observed in Ueumdo, Hwaseong City, mid-western Gyeonggi Massif. Based on their cross-cutting relationships in a representative outcrop, there are four dikes (UE-A, UE-C, UE-D, UE-E), and depending on the direction, there are three granite dike groups, which are NW- (UE-A dike), NW to WNW- (UE-C dike), and NE-trending (UE-D and UE-E dikes). These granite dikes are massive, medium-to coarse-grained biotite granites, and their relative ages observed in outcrops are in the order of UE-A, UE-D (=UE-E), and UE-C. The geometric analysis of the dikes indicates that the UE-A and UE-C dikes intrude under approximately NE-SW trending horizontal minimum stress fields. The UE-A dike, which showed a relatively low average SiO2 content by major element analysis, is a product of early magma differentiation compared to other dikes; therefore, it is consistent with the relative age of each dike. The ²⁰⁶Pb/²³⁸U weighted mean ages for each dike obtained from SHRIMP zircon U-Pb dating were calculated to be 167 Ma (UE-A), 164 Ma (UE-C), 167 Ma (UE-D), and 167 Ma (UE-E), respectively. The samples of the UE-A, UE-D, and UE-E dikes showed very similar ages. The UE-C dike shows the youngest age, which is consistent with the results of the relative age in the outcrops and major element analysis. Therefore, the granite dikes intruded into the Middle Jurassic (approximately 167 and 164 Ma), coinciding with those of the Gyeonggi Massif, where the Middle Jurassic plutons are geographically widely distributed. This result indicates that the wide occurrence of the Middle Jurassic plutons on the Gyeonggi Massif was formed as a result of igneous activity moving in the northwest direction with the shallower subduction angle of the subducting oceanic plate during the Jurassic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.676-683
• /
• 2007

In an attempt to develop an efficient method for the propagation of mature Prunus yedoensis (45 to 55 years old), green wood cuttings from normal branch and sprouts branch were treated with three different kinds of auxin (Rootone < 1-naphthylacetamide 0.4% >, IBA 100 ppm, and control and two different kinds of fog systems (0.9 L/min. and 0.54 L/min.). The Rootone treatment showed higher values in the percentage of rootings (PR) and the mean number of roots per cutting (NR) than the IBA treatment in the early stage. However, in the late stage, the values of PR and NR in the Rootone treatment become lower than those in the IBA 100 ppm treatment. On the other hand, root development ceased 62 days after taking cuttings for all of the treatments. The IBA 100 ppm treatment showed the best performance in root development (PR= 89.5%, NR = 6.5, LR=6.4 cm). The values of PR (76.5%) and NR (6.4) in the 0.9 L/min. of fog treatment was higher than those (PR = 71.7% and NR = 5.4) in the 0.54 L/min. of fog treatment. The cuttings from sprouts (PR: 74.8%, NR: 5.9, LR: 5.7 cm) showed slightly better performance in rooting rate that the cuttings from shoots (PR : 73.3%, NR: 5.9, LR: 5.4 cm). Statistically significant interactions were presented among most of the different combinations of three factors (auxin treatments, fog treatments, and types of cuttings). The PR showed the highest value of 98.0% in the combination of cuttings of shoots+IBA 100 ppm+0.54 L/min. fog treatments. In case of NR, the cuttings from normal branch showed a higher value than the cuttings from sprouts branch under the fog treatment of 0.9 L/min., while this tendency was reversed under the fog treatment of 0.54 L/min.. The perigon development of roots, which reflects the number and the direction of roots, was best in the IBA treatment (85.6%).

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.18-43
• /
• 2011

The results of study on planting and cultivate of Hong Man-Seon(1643~1715)'s 'Salimkyungjae(The Economy of Forest)' the first summative textbook of agricultural skill of South Korea, are as follows. First, 'Salimkyungjae' suggests that one can enrich oneself, eat fruits in fall, enjoy the shade of trees in summer, and enjoy flowers in spring if one plants tree with 10 year plan with knowledge of ecology. Second, the number of plants had increased continuously from the early Chosun Dynasty to the mid Chosun Dynasty. The 52 plants in the book are classified into 31 trees, 8 shrubs, 3 others, and 10 herbs, and 28 of them are fruit trees. Hence, we can see that the book is for the promotion of welfare. Third, planting(transplantation) is the best on January of the lunar calendar, and the second on February, and fertile soil should be added much. Trees must be planted as deep as once it was planted, and buttressed. It will sprout well if it is planted at the depth of one inch, and planting a cutting should be carried out at the early March with 5 inch and finger-thick branches. Grafting is the best when it begins to sprout. Fruit trees will bear many fruits if they are grafted at the direction of South, and fruits will be greater if the trees' branches are cutting off on January. Especially, January was selected for the best season of planting traditionally. Fourth, flower trees are planted or sowed with manure around January and February of the lunar calendar, and it is recommended to replant them into flowerpots with manure when having flower buds around March and April of the lunar calendar. It would bloom earlier when using water mixed with stable manure, and sulfur smoke can be used in order to change the flower color from red to white. Flowerpots would be placed at half shaded lot with being supported by bricks. Pomegranate, gardenia, camellia and four-season flower should be planted after flowers fallen. When flower trees are beside walls, they need to be rotated frequently since their branches all point toward house. Seeds need to be preserved in a sunny hut, where its entrance and ventilating openings would be at south because it is convenient to manage pots. Fifth, insects hidden at fruit trees would be destroyed by torch smoke when roosters cry on New year's day of the lunar calendar. Insects would be decoyed into straw hanged at dawn of Cheongmyeongday(淸明日). Insects on fruit trees would be controlled using sulfur powder to close up holes or sulfur smoke to fumigate. Particularly, it suggests that utilization of fertile soil would be the best solution for growing health plants and preventing pest.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.121-125
• /
• 2006

Purpose: There is ongoing demand to deliver better procedural training to medical students in the emergency department. Thus, we studied the efficacy of a cadaver-based training model for teaching simple suture techniques to medical students. Methods: We investigated ten fourth-year medical students, who were rounding and being trained in the Emergency Department of Chungnam National University Hospital. They were educated with slides about a simple suture technique for 30 minutes to evaluate the efficacy of the cadaver-based training model. We prospectively measured their skill by administering a test on the cadaver-based simple suture technique in 3cm sized linar wound separately to each of them. Results: A total of ten fourth-year medical students completed the investigation. The tension, the direction of suture, the degree of cleanness, the number of sutures, the adequacy of the cutting thread length, and the suturing time in the first attempt were compared with those in the second one. The second results were compared with those in the third one, and the third results were compared with those in the fourth one. All the results had statistical significance. Conclusion: These findings support the value of the cadaver-based simple suture technique training model as a medical student teaching model. The cadaver-based simple suture technique teaching model is a good way of teaching several medical skills to medical students.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.985-994
• /
• 2016

Since the inauguration of Defense Acquisition Program Administration(DAPA) in 2006, the national defense core technology research & development business has not only pertained to the weapons systems development but also to the improvement of the national science & technology capability via the acquisition of cutting-edge technologies. Furthermore, it has been closely related to the promotion of the defense industry and the mutual improvements of defense and civil technologies. The cyber warfare weapon system, a newly added national defense weapon system field since 2015, has become a promising weapon system branch for improving the national defense power as well as the national defense industry as shown in the case of Israel. By utilizing the existing result of the national defense core technology level, in order to establish the direction of technology planning of the cyber warfare weapon system, this paper analyzes the technology level and features of the cyber warfare weapon system in various aspects via comparisons with other weapons systems. The result of these analyses shows that the cyber warfare weapon system possesses a relatively high technology level due to the technology accumulation in the civilian sector while the relatively slow inclusion to the national weapons systems and the lack of the correspondence case regarding aggressive cyber responses in the defense sector yields a relatively low national rank. However, the technological gap between South Korea and the most advanced country in the field of cyber warfare technology is analyzed to be among the lowest, which indicates that with efficient and effective pursuits in terms of pthe weapons systems acquisitions as well as the core technologies research & development business, an outstanding cyber warfare capacity can be obtained in a short time.