• 복식문화연구
• /
• 제17권3호
• /
• pp.499-511
• /
• 2009

As the demand of the consumer for high-sense clothing, relation with materials is becoming important even in clothing construction. Especially, the cutting angle of materials is becoming an crucial element in the formation of silhouette, and drape of Hem line, of skirts. Accordingly, in this study, Hem line shapes between real clothing and 3D virtual clothing of "i-Designer" were analyzed by manufacturing semi-flare skirts of polyester 100% according to a cutting angle, and the results are as follows. As a result of comparison of silhouette between the real clothing and the virtual clothing, the real and the virtual have a similar feeling regardless of a cutting angle. In case of drape shapes, both the front and the lateral side were represented in almost similar shapes. The back side, however, the real and the virtual showed a great difference in case of grain direction. And in the whole silhouette, the real and the virtual were represented similarly. It could be known that with regard to Hem-line drape shapes between the real clothing and the virtual according to a cutting angle, the real clothing is represented in a location farther from the body than the virtual clothing and, the location or number of node was similarly showed in the real and the virtual.

• 복식문화연구
• /
• 제17권4호
• /
• pp.616-625
• /
• 2009

With suffering financial crisis in 1997, Korea's fashion market has grown in the direction that satisfies the reasonable price and diverse consumer's sensitivity and needs. The aim of this study is to examine whether the cutting portion in the waist line is surely necessary for designing the jacket pattern in men's wear, by closely examining the effects of the cutting portion in the waist line on the external appearance and functionality given designing the jacket pattern in men's wear for the standard body type in 20s. The results of the study are as follows. As a result of evaluating the external appearance, when having evaluated by dividing into 14 items such as the whole surface, the side, and the back side, the experimental clothing, which wasn't cut the waist line, obtained the highest mark in 13 items and, the significant difference was indicated in 10 items except 4 items. As a result of evaluating performance, the experimental clothing, which wasn't cut the waist line, obtained the highest mark in 13 items among 25 items in the total. Next, the cutting portion in the waist line obtained the highest mark in 10 items for the experimental clothing with opening in 1.0cm. The next was indicated to be in order of the experimental clothing with 1.5cm and the experimental clothing with 0.5cm. Given seeing the above result, the cutting portion in the waist line given designing the jacket pattern for the standard body type in 20s could be known that the experimental clothing with the most excellent mark in the evaluation of performance was all the experimental clothing with 0.0cm whose waist line wasn't cut.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.98-104
• /
• 2022

When processing parts, the cutting oil can improve the cooling performance of the workpiece and tool to increase the precision of the workpiece or extend the life of the tool and facilitate chip extraction. Since such cutting oil has a harmful effect on the environment and the human body due to additives such as sulfur, research on a minimum lubrication supply method using an eco-friendly oil is recently underway. The minimum lubrication supply method minimizes the amount of cutting oil used during processing and processes it, which can reduce the amount of cutting oil used, but has a problem in that cooling performance efficiency is poor. Therefore, this study conducted a study on mist cooling of lubricants to reduce the amount of cutting oil used and maximize the cooling effect of processing heat generated during tapping processing. Spray pressure, processing speed, direction, and lubricant spray amount, which are considered to have an effect on cooling performance, were set as process conditions, and the effect on temperature was analyzed by performing an experiment using the box benquin method among experiments were analyzed. Through the experimental analysis results, the optimal conditions for mist and processing that maximize the cooling effect were derived, and the validity of the results derived through additional experiments was verified. In the case of processing by applying the mist lubrication method verified through this study, it is considered that high-precision processing is possible by improving the cooling effect.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.135-140
• /
• 1988

본 시험은 林間草地에서 연간 예측회수(3,4,5回)와 예취높이 (3,6,9cm)가 목초의 生育과 收量 및 초지地植生에 미치는 영향을 究明하여 임간초지의 생산량증대와 이용年限延長을 위한 기초자료를 얻고자 실시되었으며, 林間地의 조건은 南向인 소나무 지대로 選光程度는 30%였다. 연간 예취回數별 乾物收量은 4회 예취구(6097kg), 3회 예취구 (5953kg) > 5회 예취구 (5305kg/ha)순이였으나, 館料價植를 고려한 수량차이는 크지 않을 것으로 사료된다. 예취높이별 乾物수량은 예취회수에 관계없이 예취높이가 3,6,9cm로 높아짐에 따라 有意的으로 증가하였으며 (P

• 자원환경지질
• /
• 제33권1호
• /
• pp.77-88
• /
• 2000

The goal of this study is to assess the spatial distribution of natural slopes and cutting slopes under would-be development. For this goal, a quantitative slope stability analysis method using GIS integrated with a computer program was developed. Through field investigations, the discontinuity parameters were collected such as orientation of discontinuity, persistence, spacing, JRC, JCS, and water depth. The distributions were interpolated from the ordinary kriging method in ARC/INFO GIS after variogram analysis. The layers showing all parameters needed for limit equilibrium analysis were constructed. The final layer using GIS works composed of 162,352 polygons, that is, unit slopes. The rock slope stability analysis program was coded by C++ language. This program can calculate geometrical vectors related to rock block failures using input orientation data and direction and dimension of strength to occur failure. Also, this can calculate shear strength of joints through empirical equations and quantitative factors of safety. This methodology was applied to the study area which is located in Jaecheon city and Danyang-gun of the northeastern Keumsu is about 135$km^2$. As a result, the study area was entirely stable but unstable, that is, factor of safety less than 1.0dominantly at the slopes near Keumsil, Daejangri, Keumsungmyun and Sojugol, Mt. Dongsan, Juksongmyun by the natural slope stability analysis. Assuming the cutting slope showing the same direction immediate, and quantitative analysis of factors of safety for a regional area could be conducted through GIS integrated with a computer program of limit equilibrium.

• 항공우주시스템공학회지
• /
• 제2권4호
• /
• pp.1-6
• /
• 2008

In generally, the regression rate was expressed with average value and oxidizer mass flux in hybrid propulsion system. This can not represent the local value of regression rate along with oxidizer flow direction. In this study, experimental studies were performed with Separation method and Cutting method for measure local regression rate. In axial injection, the local regression rate decreases rapidly with axial location near entrance and increases with axial direction from the leading edge and the empirical formula for local regression rate with function of oxidizer mass flux and location was derived. Swirl injection regression rate has higher value at the leading edge of the fuel and comparatively uniform regression rate at the downstream. Overall regression rate of swirl injection is higher increased about 54 % than regression rate of axial injection.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.63-70
• /
• 2020

As the consumer market in the VR(virtual reality) and the head-up display industry grows, the demand for 5-axis machines and grooving machines using on a ultra-precision machining increasing. In this paper, ultra-precision diamond tools satisfying the cutting edge width of 500 nm were developed through the process research of a focused ion beam. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam. In order to reduce the influence of the Gaussian beam emitted from the focused ion beam, the lift-off process technology used in the semiconductor process was used. 2.9 ㎛ of Pt was coated on the surface of the diamond tool. The sub-micron tool with a cutting edge of 492.19 nm was manufactured through focused ion beam machining technology. Toshiba ULG-100C(H3) equipment was used to process fine-pattern using the manufactured ultra-precision diamond tool. The ultra-precision machining experiment was conducted according to the machining direction, and fine burrs were generated in the pattern in the forward direction. However, no burr occurred during reverse machining. The width of the processed pattern was 480 nm and the price of the pitch was confirmed to be 1 ㎛ As a result of machining.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1113-1124
• /
• 2018

Geological dynamic hazards during deep coal mining are caused by the failure of a composite system consisting of the rock and coal layers, whereas the joint in coal affects the stability of the composite system. In this paper, the compression test simulations for the rock-coal combined body with single joint in coal were conducted using $PFC^{2D}$ software and especially the effects of joint length and joint angle on strength and failure characteristics in a rock-coal combined body were analyzed. The joint length and joint angle exhibit a deterioration effect on the strength and affect the failure modes. The deterioration effect of joint length of L on the strength can be neglected with a tiny variation at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ between the loading direction and joint direction. While, the deterioration effect of L on strength are relatively large at ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$. And the peak stress and peak strain decrease with the increase of L. Additionally, the deterioration effect of ${\alpha}$ on the strength becomes larger with the increase of L. With the increase of ${\alpha}$, the peak stress and peak strain first decrease and then increase, presenting "V-shaped" curves. And the peak stress and peak strain at ${\alpha}$ of $45^{\circ}$ are the smallest. Moreover, the failure mainly occurs within the coal and no apparent failure is observed for rock. At ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$, the secondary shear cracks generated in or close to the joint tips, cause the structural instability failure of the combined body. Therefore, their failure models present as a shear failure along partial joint plane direction and partially cutting across the coal body or a shear failure along the joint plane direction. However, at ${\alpha}$ of $60^{\circ}$ and L of 10 mm, the "V-shaped" shear cracks cutting across the coal body cause its final failure. While crack nucleations at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ are randomly distributed in the coal, the failure mode shows a V-shaped shear failure cutting across the coal body.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.51-60
• /
• 2006

At new constructing national road, a cutting slope was surveyed and gotten face mapping for three months. The slope is composed of gray phyllite and coaly slate which is the Chang-ri Formation, Okcheon system. The slope angle is 40 degree and the direction is NNE. The attitude of schistosity is $260^{\circ}/45^{\circ}$. So the slope direction is nearly parallel to the schistosity. This is the reason that the slope is very unstable. On the other hand, the very unstable slope is caused by the direction of the schistosity and the slope. First month the coaly slate was slided through the schistosity plane about 10cm. However, three months late the displacement was 2m maximum.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권6호
• /
• pp.589-595
• /
• 2013

본 논문은 플라즈마 절단 면 특성이 I Groove 서브머지드 아크 용접 용락 현상에 미치는 영향과 용락 현상을 감소시키는 방법에 대하여 연구하였다. 조선해양 구조물의 주판은 대부분 후판으로 설계되고 깊은 용입을 얻기 위하여 고 전류를 사용하게 된다. 용접부의 절단 품질에 따라서 서브머지드 아크용접 진행 시 용락 현상이 자주 발생되고 이는 용접부의 품질 저하와 수정 작업을 유발시킨다. 본 연구의 플라즈마 절단 실험에서 나타난 특성으로 I형상 그루브 직각 절단 시 상,하면에 플라즈마 열원에 의한 녹음 현상과 함께 하면 한 방향에 약 2~4도 정도의 각 변형 베벨이 형성됨을 확인하였다. 이는 맞대기 이음에서 용락 현상의 주된 원인이며 모재 절단 시 상면 방향에 I 그루브 형상에 가깝도록 한 방향 기준으로 V형상 그루브 4도 베벨을 시공하여 서브머지드 아크 용접을 실시한 결과 용락 현상을 현저히 저감시키는 결과를 얻을 수 있었다.