• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.827-836
• /
• 2014

In this study, the effects of Mulberry leaves extract (ME) addition on the quality of Kimchi was investigated during 30 days of fermentation at $5^{\circ}C$. ME was added to salted cabbage at concentrations of 0% (C), 0.4% (ME1), 0.8% (ME2) and 1.2% (ME3) (w/w). The pH of Kimchi added above 0.8% ME was higher than that of Kimchi without ME after 12 days of fermentation. During overall fermentation, the titratable acidity of Kimchi with 1.2% ME remained at the lowest level. The degree of salinity decreased with increasing amount of added ME, whereas control groups showed the highest salinity. In L, a and b values of samples, the highest Figures of L and b were observed in control groups, and ME3 showed the highest value of a. In addition, the cutting force during the fermentation period was higher in all treated groups compared with control groups, and ME3 showed the highest hardness value. Moreover, growth of lactic acid bacteria and total bacteria were inhibited by addition of ME. In the sensory assessment, 0.4% ME improved the quality of Kimchi, showing the highest taste score and overall preference. Therefore, addition of 0.4% ME appears to be an acceptable approach to enhance the quality of Kimchi without reduction of acceptability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.731-733
• /
• 2016

The primary goal of the line tracer is to accurately and quickly detect the movement up to the target position given by the sensor juhaengseon. It has been used in applications in various fields such as the current unmanned transport vehicles, laser cutting machine, autonomous mobile robots and unmanned driving is possible, and is held annually at various universities in the competition field with the possibility of great progress, depending on the application. However, there arises a large difference in running performance, depending on the hardware design and control. In this paper, improving the characteristics of the tracer line and characters to design a PID controller is to apply the point on ways of improving the properties of the system.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.57-68
• /
• 2001

해안지역의 녹화 및 조경용으로 유용한 내염성 식물자원임과 동시에 서식지가 급격히 감소하고 있는 순기비나무를 대상으로 하여 생장특성과 번식방법을 규명하기 위한 연구를 수행하였던 바, 그 결과를 요약하면 다음과 같다. 1. 줄기의 생장형태는 포복줄기와 직립줄기가동시에 생장하고, 5개 주요 군락지에 직립줄기의 길이는 평균 46.6cm 이고, 포복경의 초대 길이는 7.6cm에 달하였다. 2. 종작발아율은 황적색의 무처리 종자와 $GA_3$처리 종자에서 71.0~72.3%로 가장 높았으나, 두 처리군사이에는 발아율의 차이가 없었다. 종피현화를 목적으로 한 황산처리는 오히려 종자의 발아를 억제하였다. 3. 종피 색깔이 황적생인 종자는 흑갈색 종자에 비해 평균 21.1%(13~30%)발아율이 높았다. 실득모율은 30% 미만으로 아주 낮았으나 흑갈색 종자에 비해 황적색 종가자 약 2배 높았다. 또한 $LD_{50}$은 황적색 종자가 흑갈색 종자보다 10~20일 짧았다. 4. 종피 색깔과 화학처리가 같은 조건에서 기건저장한 종자와 노천매장한 종자사이에는 발아율, 식득묘율, $LD_{50}$등의 차이가 없었다. 5. 기건저장한 황적색 종자가 바다모래에서 30.3%의 발아율과 10.1%의 실득모율을 나타냈으나, 갯벌흙에서는 전혀 발아되지 않았다. 6. 삽목번식의 경우 추삽에서 발근육은 녹지삽이 가장 높았고, 다음이 반지숙삽, 숙지삽의 순이었다. 발근율이 가장 높은 것은 NAA 200ppm+sucrose 2%를 처리한 녹지로서 96.7%의 발근율을 나타내었다. 발근수는 전반적으로발근율에 비례하는 경향이었다. 7. 하삽에서 NAA 200ppm+sucrose 2%를 처리한 녹지, 반숙지, 숙지의 토양별 발근율은 vermiculite+ perlite(1:1)와 마사토에서는 81.1~87.8%로 높았고, 모래와 해상에서 48.9~77.8%로 낮았다.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.31-40
• /
• 2013

Recent development in science and technology has modernized the weapon systems of ROKN (Republic Of Korea Navy). Although the cost of purchasing, operating, and maintaining the cutting-edge weapon systems has been increased significantly, the national defense expenditure is under a tight budget constraint. In order to maintain the availability of ships with low cost, we need an efficient and scientific method for managing repairable parts. In this study, we propose a simulation model that computes the availability of ship's repairable parts. Our model is based on the METRIC (Multi Echelon Technique Repairable Item Control) model and extends to five sub-models to reflect the realistic situations that arise in the navy, such as planned maintenance, condemnation, lateral transshipment, and cannibalization. We have performed simulations to compute the availability of repairable parts while setting the part-level consistent throughout the five models and carried out two sensitivity analyses. The simulation results show the differences in the part availability in different models. The experiments confirm our claim that ROKN needs an inventory management system that captures the operational characteristics of the navy.

• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.107-113
• /
• 2002

This study was performed to obtain the information on fruit set, propagation and flowering habits of the exotic ornamental bottle brush tree (Callistemon citrinus). Trees have fruit capsules for four years since the fruit set and they have enlarged for three years. While 2 and 3-year-old capsules have similar seeds in number and size, 1-year-old ones have fewer and smaller seeds. Most dried capsules open when they have 75％ relative water contents. Two year old seeds which they were dried at 30％ germinated better than others. Removal of capsule bearing twigs resulted in greatly increased subsequent flower numbers (an average of 14 flowers per tree) compared with twigs where seed capsule were allowed to remain. In cutting for propagation, semi-hard wood branches dipped in 100mgι$^{-1}$ IBA for 24 hours rooted at 86.4 ％ and had an average of 12.6 primary roots.

• Asian Journal of Turfgrass Science
• /
• v.9 no.1
• /
• pp.11-42
• /
• 1995

The investigation was made on the relationship among vegetation, net productivity, regrowth and soils of Moonheri-Wasoori, Soodowon-Sungilkyo and Mt. Kumhak grasslands in Chulwon area. The following conclusions have been made as the results of this study. The vascular flora of the grassland in Moonheri-Wasoori was composed of 102 species, the most of which were Medicago denticulata, Miscanthus sinensis, Arundinella hirta, Festuca ovina and Cassia nomame. The flora of Soodowon-Sungilkyn grassland was composed of 74 species, the most of which were Arundinella hirta, Miscanthus sinensis, Carex nanella, Festuca ovina and Cassia nomame. It of Mt. Kumfiak grassland was composed of 78 species, the most of which were Arundinella hirta, Carex nanella, Festuca ovina, Miscanthus sinensis and Aster scaber. These five species contributed greatly to the standing crop of live material which was in excess of 60% of it. The peak standing crop of each 413.7, 307.6 and $348.7g /m^2$ in Moonheri-Wasoori, Soo- dowon-Sungilkyn and Mt. Kuruhak grasslands wars reached in August under flooded conditions as a result of the growth of dominant species, Medicago denticulata and Arundinella hirta. The net prodution of organic matter was slight in some intervals but occurred throughout the growing season After cutting of grasses, the regrowth of new leaves mainly depended on growing stage and edaphic factors. Characteristics of the natural grassland soils, especially, concerning water, total nitrogen, avail-able phosphorus and exchangeable calcium were clarified and might be depend upon the quantity of plant production. Nitrogen, phosphorus and calcium concentration of leaves of Medicago denticulata, Arundinella hirta and Miscanthus sinensis were higher than of stems. Even if diem we diffurmem in the a-mb of nutrients among Medicago denticulata hirta and Miacanthus sinensis for single species and stands. they were covered by variations within species in the present survey. Key words: Competition, Production, Productivity, Regrowth, Soil Properties, Vascular Flora.

• Applied Science and Convergence Technology
• /
• v.26 no.2
• /
• pp.34-41
• /
• 2017

A 2.45 GHz microwave plasma with linear antenna has been prepared for hydrophobic and wear-resistible surface coating of carbon steel. Wear-resistible properties are required for the surface protection of cutting tools and achieved by depositing a hydrogenated amorphous carbon film on steel surface through linear microwave plasma source that has $TE_{10}-TEM$ waveguide. Compared to the existing RF plasma source driven by 13.56 MHz, linear microwave plasma source can easily generate high density plasma and provide faster deposition rate and wider process windows. In this study, $Ar/CH_4$ gas mixtures are used for hydrogenated amorphous carbon film deposition. When microwave power of 1000 W is applied, 40 cm long uniform $Ar/CH_4$ plasma could be obtained in gas pressure of 200~400 mTorr. The Vickers hardness measurement of hydrogenated amorphous carbon film on steel surface was evaluated. It was found the optimized deposition condition at $Ar:CH_4=25:25$ sccm, 300 mTorr with microwave power of 1000W and RF bias power of 100W. By deposition of hydrogenated amorphous carbon film, contact angle on steel surfaces increases from $43.9^{\circ}$ to $93.2^{\circ}$.

• Journal of Fashion Business
• /
• v.24 no.3
• /
• pp.121-137
• /
• 2020

This thesis makes it an aim to develop designs of Shinhanbok coats interpreting and applying the formative structure of the lattice window pattern in Huijeongdang of the Changdeokgung palace, one of the best architecture in Chosun dynasty. Literature review about the history and characteristics of the window of Huijeongdang of the Changdeokgung palace was performed on the basis of the internet resources and papers, and the examples of the fashion design applying the lattice window patterns were analyzed. Then, three style Shinhanbok coats were designed and presented with making use of 6 kind of lattice window patterns as its motif. The coats were designed in flexible size, attempting to clad any kind of body size and shapes. Design 1 drawn from Wanjasal, Tisal, Design 2 drawn from Ajasal, Yongjasal, Tisal, design 3 drawn from Bitsal, Jungjasal. In conclusion, lattice window patterns of the traditional beauty highlighted in view of modern times might be suggested as the motif for expressing the proportion with balance and rhythm with stability. The division of the space with the line was tried with the technique of the bias cutting, stitching and taping with the design of simplicity signified in the aesthetics of the vacant space in addition to its ornamental effects. Thus, this study would like to contribute to the popularity of the Shinhanbok outlined in modern application and unique taste through the study and applications of the traditional lattice window pattern of Korea.

• KSBB Journal
• /
• v.31 no.1
• /
• pp.20-26
• /
• 2016

This study aims to examine the optimum blanching conditions as a pretreatment condition to improve the storage stability of Dolsan leaf mustard pickle. The effects of the blan- ching temperature and time were investigated at a temperature range of $80-100^{\circ}C$. Sampling was done for 1 month after a 5 days interval. The L value of the Dolsan leaf mustard was found to be the highest at $80^{\circ}C$. The cutting force increased as the blanching temperature increased. The tensile strength decreased at $95^{\circ}C$ and $100^{\circ}C$. In addition, the sensory evaluation scores were the best at $80^{\circ}C$. The storage stability was assessed at various blanching temperatures to increase the sinigrin content during storage. Liquid chromatography with photodiode array and tandem mass spectrometry (LC-PDA/MS/MS) analysis was conducted to identify and quantify the sinigrin content in the Dolsan leaf mustard. Sinigrin as an internal standard was co-injected into each sample solution. The sample was monitored by recording the ultraviolet absorbance at 228 nm and by electrospray ionization (ESI) positive ion mode in the m/z 50-1,500 range. Blanching the sample at $80^{\circ}C$ showed the highest sinigrin concentration during storage among various temperatures and the maximum concentration was 350 ppm at 15 days storage. Study on utilization of vegetable from food processing of leaf mustard and preservation conservation results suggest that blanching at $80^{\circ}C$ is expected to improve the palatability of the pickle.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.66-70
• /
• 2000

In order to cope with environmental problems caused by harmful gases emitted from various industrial sources, a new technology which employs discharge plasma formed in ordinary atmospheric pressure has been intensively investigated in many industrialized nations. Although a plenty of useful outcomes and suggestions have been made public by scientists in this field, few commercial products which effectively decompose pollutant gases have appeared as yet. This is partly because that the energy efficiency of a most effective plasma reactor has not reached a satisfactory level in comparison with those of devices using conventional technologies. In an attempt to solve the problem mentioned above, we noticed to combine heterogeneous electrical discharges. This concepts is based on that each plasma reactor has its specific spatial region in which chemical reaction are active and by electrically affected with another reactor of different type, the activated region would increase - which may lead to cutting down the energy consumption. To prove this concept experimentally, two different discharge equipments, a plane ceramic-based surface discharge electrode and a corona electrode with tungsten needle may, are selected and combined to fabricate a hybrid plasma reactor. The results are summarized as follows; (1) Ozone concentration generated in the plasma region drastically increases when the positive corona discharge is added to the surface discharge. The rate of increase of ozone depends on the frequency of the surface discharge. The negative corona, however, does not contribute to the improvement of the ozone generation. (2) NO(nitrogen monoxide) decomposition rate also improves by simultaneously applying the surface and the positive corona discharges. The effect of the corona superposition is more evident when the level of the surface discharge is moderate. (3) By adjusting the corona level, the net energy efficiency during NO decomposition improves in comparison with the simple surface discharge reactor.