• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.38-50
• /
• 1998

Laser cutting tests were conducted to investigate the laser cutting characteristics of solid woods such as 25mm-thick white oak(Quercus acutissima) and maple(Acer mono), and wood-based panels such as 15mm-thick medium density fiberboard and particleboard. Test variables were laser power, cutting speed, grain direction, and moisture content. Specific cutting energy was measured and the qualities of cut surface were estimated in constant laser power. Specific cutting energy of white oak was larger than that of maple, and specific cutting energy of medium density fiberboard was smaller than that of particleboard. For both white oak and maple, specific cutting energy of green wood was smaller than that of air-dried wood because weight loss of moisture evaporation in green wood was larger than that in air-dried wood. In laser-cut surface, wood cells were not deformed and damaged, but in circular saw-cut surface fibers were pushed out and cut, and wood cells were deformed severely. However, mechanical surface roughness of saw-cut surface was smoother than that of laser-cut surface because of the existence of undeformed cell cavity in laser-cut surface.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.85-91
• /
• 2003

The experimental study for turning circular free fanned surface with TiN coated insert tool was conducted for different cutting conditions such as cutting speed, feed rate and depth-of-cut. For the fluctuation of 1.0mm depth-of-cut, the characteristics for machined surface and tool wear were less influenced by the feed rate and cutting speed than those of higher depth of cut. The higher surface roughness and surface precision were obtained in lower cutting speed. For the fluctuation of 1.5mm depth-of-cut, the higher surface roughness was obtained for the case of the lower feed rate of 0.05-10mm/rev and the higher cutting speed of 80m/min. For the fluctuation of 2.0mm depth-of-cut, the surface roughness and surface precision were too worse to machine the specimen And the flank wear on the tool was increased rapidly rather than the crater wear.

• 한국음향학회지
• /
• 제1권1호
• /
• pp.37-44
• /
• 1982

In the mixed layer when the frequency approaches the cut-off frequency for the first mode of notmalmode theory, sound ceases to be trapped. Based on the data of surface sound velocities abtained during the period of 16 years in the Sea of Japan. A new cut-off frequency coefficient in the surface duct that will determine the miximum wave length for duct transimission of underwater sound has been calculated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.286-291
• /
• 2004

The objective of this research work is to investigate the influence of process parameters, such as power of laser, travel speed of laser and material thickness, on roughness and striation of the cut surface for the case of cutting of CSP 1N sheet using high power Nd:YAG laser with continuous wave(CW). In order to find the practical cutting region and the relationship between process parameters on the roughness and the striation, several laser cutting experiments are carried out. From the results of experiments, the allowable cutting region and an optimal cutting speed for each cutting condition have been obtained to improve the quality of the cut surface. In addition, it has been shown that the surface roughness is related to the number of striation and depth of valley of the cut surface.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.57-61
• /
• 2004

in order to improve the quality of the sheared surface in cutting of sandwich sheet metals the cut-off operation is mainly investigated which is the typical shearing process in sheet metal forming technology. For experiments the cut-off die is made which can be easily adjusted by die design variables such as blankholding force, pad force, and clearance. The sheet metals chose as specimen are clad304(STS304-Al1050-STS304) and anti-vibration sheet metal. The shearing process is visualized by the computer vision system installed in front of the cut-off die and the sheared surface before and after cut-off operation is measured and quantitatively compared with the help of the optical microscope. From test results the good sheared surface was shown when the clearance gets small with large blankholding force.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.91-101
• /
• 2017

최근 레이저를 이용하여 전자 소자 및 모듈을 절단하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 레이저를 이용하여 LED 모듈을 초고속 절단하기 위한 기초 연구를 수행하였다. 특히 기존의 다이싱(dicing) saw의 절단 속도를 훨씬 능가하는 100 mm/s의 초고속 레이저 절단의 가능성을 검토하였다. 이를 위하여 LED 모듈의 구성 재료인 copper/ceramic 및 silicone/ceramic 이종 복합 기판을 제작하여 레이저 절단 후, 절단면의 표면 특성, 표면조도, 굽힘 강도를 다이싱 saw를 이용하여 절단한 샘플과 비교하였다. 복합 기판에 대한 최적의 레이저 절단 조건을 찾기 위하여, 세라믹 및 구리 단일 기판의 레이저 절단을 통하여 다양한 레이저 공정 조건들에 대한 영향 검토하였다. 절단면의 표면 특성이 가장 좋은 최적의 레이저 절단 조건은 Ar 보조 가스의 사용, 높은 레이저 파워 및 높은 보조 가스의 압력이었다. Copper/ceramic 및 silicone/ceramic 이종 복합 기판에 대하여 레이저 절단과 다이싱 saw로 절단한 기판의 절단면을 비교한 결과, 레이저로 절단된 기판이 다이싱 saw 절단에 비하여 표면이 거칠고 표면 특성이 약간 나쁘다. 레이저 절단면의 평균 표면조도는 약 $9{\mu}m$ 이며, 다이싱 saw로 절단된 절단면의 표면조도는 약 $4{\mu}m$ 이었다. 그러나 다이싱 절단의 절단 속도(3 mm/s)를 고려하면 레이저 절단면의 표면 morphology가 비교적 균일하고, 표면조도도 다이싱 절단의 경우와 큰 차이가 없기 때문에 어느 정도 만족할 만한 결과를 얻었다고 판단된다. 또한 레이저 절단된 기판의 굽힘 강도가 다이싱으로 절단된 기판의 굽힘 강도보다 동등하거나 약간 열세이었다. 그러나 향후 레이저의 절단 조건이 좀 더 최적화된다면 LED 모듈의 초고속 레이저 절단이 가능할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.87-92
• /
• 1996

When cutting 2.0cm-thick red oak and hard maple with an air-jet-assisted carbon-dioxide laser of 2kW output power, maximum feed speed at the point of full penetration of the beam decreased with increasing the angle between grain and cutting direction. Feed speed averaged 3.75 and 3.38 meters per minute for red oak and hard maple, respectively. Gray-level of laser-cut surfaces were analyzed by image analysis system. The highest gray level of laser-cut surface was obtained when red oak was cut parallel to grain by laser. Surface profiler was used to scan the sawn and laser-cut surfaces. Center line average roughnesses of laser-cut surfaces were higher than those of sawn surfaces. Scanning electron micrographs showed the cell walls which were melted by laser.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.24-31
• /
• 2003

In the gas cutting of plate steel, the quality of the cut surfaces and sections is strongly dependent on the cutting conditions such as cutting speed, kerf width, plate thickness, material, distance between tip and specimen, and cutting oxygen pressure etc. The cutting tests of plate steel were carried out using CNC gas cutting machine. This paper deals with cut surface and section characteristics of plate steel in CNC gas cutting. Both top and bottom widths of kerf, the surface roughness(Ra, Rmax) of cutting surfaces are measured under various cutting conditions such as cutting speed, material, distance between tip and specimen, and cutting thickness. The photographs of cut surface and cut section are also analyzed under various cutting conditions.

• 한국표면공학회지
• /
• 제35권6호
• /
• pp.357-362
• /
• 2002

In this study, to improve the effect of the surface treatment, the shape design of shot ball is proposed. The fatigue effects of shot peening by the cut wire shot ball and the rounded cut wire shot ball are compared. The rotary bending and tensile fatigue tests are conducted on a spring steel to evaluate fatigue lives. The residual compressive stresses by the rounded cut wire shot ball is higher than by the rounded cut wire shot ball. This consequently increase the fatigue life and the reliability of surface treatment. Thus, to obtain optimum, repeatable and reliable shot peening effect the shape of the shot ball must be round.