Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)
- Volume 2 Issue 1
- /
- Pages.85-91
- /
- 2003
- /
- 1598-6721(pISSN)
- /
- 2288-0771(eISSN)
Machining Characteristics in Turning Circular Free Formed Surface with Coated Tool
코팅공구에 의한 원형곡면 선삭가공시 절삭특성
- Published : 2003.03.30
Abstract
The experimental study for turning circular free fanned surface with TiN coated insert tool was conducted for different cutting conditions such as cutting speed, feed rate and depth-of-cut. For the fluctuation of 1.0mm depth-of-cut, the characteristics for machined surface and tool wear were less influenced by the feed rate and cutting speed than those of higher depth of cut. The higher surface roughness and surface precision were obtained in lower cutting speed. For the fluctuation of 1.5mm depth-of-cut, the higher surface roughness was obtained for the case of the lower feed rate of 0.05-10mm/rev and the higher cutting speed of 80m/min. For the fluctuation of 2.0mm depth-of-cut, the surface roughness and surface precision were too worse to machine the specimen And the flank wear on the tool was increased rapidly rather than the crater wear.
Keywords