• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.305-311
• /
• 2004

Several sensor systems are used to estimate the reinforceing effect of pile in hihg cut slopes, and to find a failure zone in slopes effectively. Inclinometer, extensometer and V/W sensor have shown a great potentiality to serve real time health monitoring of the slope structures. They were embedded or attached to the structures, we conducted field tests and test results have shown great solutions for sensor systems of Civil Engineering Smart Structures. This research is to seek for the relationships among the slope movement and the reinforceing effect of pile, and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the relationships. Also, the relationships between temperature and reinforceing effect of pile, and the strain distribution are estimated in this paper.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.133-140
• /
• 2012

The study of Arundinaria munsuensis Y. Lee to this day was limited to the field of morphological species classification since its first discovery at Jiri mountain in the late 1990s. This native plants, one of Korean endemic species found in Jiri Mt. necessitates further studies about its use as revegetation plants or groundcover plants in urban areas. This study was launched from this need followed by summaries of results below related to its usage. This targeted species is a native Korean species which its natural distribution on the subalpine zone has merit for the wide range of climatic adaptation. Also, the coverage rate reached 78.3% in three years mostly by rhizome growth with an expectation of full coverage in four years providing less maintenance needs after planting. The net price for the construction of pot seedling methods of this plants is relatively economical than other normal revegetation construction methods. For these reasons, drilling for the plants on cut and fill soil slopes driven from pot seedling adapts Arundinaria munsuensis Y. Lee as efficient revegetation plant. Total construction cost for pot seedling work($30cm{\times}30cm$) of Arundinaria munsuensis was approximately 21,000won which is in reasonable price range when compared to other revegetation construction methods of disturbed slopes. As a native Korean plant, Arundinaria munsuensis has wide range of climatic adaptation with less maintenance requirement after planting. This study may suggest a strong possibility of Arundinaria munsuensis as a pot planting material in sloped area.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.17-32
• /
• 1998

The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia, The power station will consist of a 210m height concrete faced rockfill dam. During the construction of the dam and the power facilities the Balui river has to be diverted by three diversion tunnels with a length of some 1,400m each. The inner diameter of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet and outlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four. defined Rock Mass Types (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages. In the first stage, it is calculated for the stability of each 'global' slope without any rock support and shotcrete system. In the second stage, it is calculated for each 'local'slope stability with berms and supported with rock bolts and shotcrete. The monitoring instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.111-129
• /
• 2002

Generally, investigation methods of cut slope are conucted only geological surface survey to gain engineering geological data of cut slopes. These methods have many problems such as limitations of investigation for a special area. So geophysical investigations such as geotomography, seismic and electrical resistivity methods have been used to search for failure surface in potential failure slopes or failed slopes. But investigation method using the borehole camera is recently a used method and it is thought that this method is more reliable method than other investigation methods because of being able to see by the eyes. Therefore, this paper was conducted investigations of borings and BIPS(Borehole Image Processing System) to search for potential sliding surfaces and was applied to obtain information of discontinuity on failed and potential failure slope in highway. As the results of BIPS, we could decide potential sliding surface in the slope, conducted to check slope stability and decided slope stability measures.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.106-113
• /
• 2009

In this study, stability of the new gabion system with vegetation base materials was analysed. New gabion system with vegetation base materials is a new approach which has been developed to achieve lope stabilization and revegetation of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials. Results from stability analysis are as follows. For the soil density, the angle of internal friction and unit weight of the rock fill was assumed to be $1.90g/cm^3$, $30^{\circ}$ and $2.30t/m^3$, respectively, the slope stability analysis showed that the new gabion system couldn't require any poles to fix it up, and could keep stable during both rainy and dry seasons. As the results of checks against overturning and sliding, the retaining wall with. the new gabion system could produce suitable factors of safety for overturning and sliding. Vegetation established on the surface of the new gabion systems indirectly can help to increase slope stability by prevention of surface erosion. Consequently, the new gabion system with vegetation base materials could achieve the desired effect on slope stabilization as much as existing gab ion system could do, and could promote rapid establishment of vegetation on cut-slopes.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.417-425
• /
• 2012

CCTV cameras are used for surveillance and purposes of security, and can also be applied for monitoring infrastructure and equipment. In the Cut Slope Management System managed by KICT (Korea Institute of Construction Technology), cut slopes are continuously monitored using a real-time system, with CCTV cameras installed at 119 sites to detect slope activity. Here we compare CCTV images with displacement at three sites and perform a quantitative analysis. Methods for improving CCTV camera management and systems are also discussed with regard to communication, obstacles, and nighttime management.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.31-42
• /
• 2021

Database of Cut-slope management system (CSMS) has been constructed based on investigations of all slopes on the roads of the whole country. The investigation data is documented by human, so it is inevitable to avoid human-error such as missing-data and incorrect entering data into computer. The goal of this paper is constructing a prediction model based on several machine-learning algorithms to solve those imperfection problems of the CSMS data. First of all, the character-type data in CSMS data must be transformed to numeric data. After then, two algorithms, i.g., multinomial logistic regression and deep-neural-network (DNN), are performed, and those prediction models from two algorithms are compared. Finally, it is identified that the accuracy of DNN-model is better than logistic model, and the DNN-model will be utilized to improve data-quality.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2003

In South Korea, about 74% of total area is mountainous terrain It is therefore inevitable to make tunnel or cutting slope for road construction. According to a related survey, approximately 2,400 sites of cutting slopes were found from 24 different routes of roadway which is overall 900 km long, implying 2.7 slopes per 1km of roadway on average. Even though safety matter such as the slope failure prevention would be the most important consideration for the construction of cutting slopeslandscape of sloped face is nowadays becoming another important factor due to the growing demand for the driver-friendly road environment Various construction methods which attain this goal should therefore be considered in the design stage of the roadway. The objective of this study is to identify important factors in landscape of sloped-cut roadway using factor analysis. For this, 10 main treatment methods of sloped-cut fact were analyzed. This study employed the LISREL(structural analysis of common variance) model in order to capture the qualitative characteristics of the slope-cut road and examine the relationship between the suey error and the variable(s). As a result, more reasonable landscape evaluation model for the road design and construction was proposed.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.337-345
• /
• 2004

The objective of this study was to monitor vegetation recovery process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored in 1997, 1999, 2001, and 2003. Vegetation development pattern during last ten years (1994-2003) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clear-cut, Styrax japonica and Lindera erythrocarpa as of sprout tree and Aralia elata as of seedling were dominant species in the sixth year after clear-cut, and Lindera erythrocarpa, Styrax japonica and Quercus serrata were dominant species from the eighth year to the tenth year after clear-cut. Species diversity index of harvested forest interior was decreased at the southwestern slope while it was increased in the northeastern slope till 6th year and decreased after the 8th year). According to DBH distribution pattern, No. of individuals of Quercus serrata, Styrax japonica and Lindera erythrocarpa showed high frequency in the southwestern slope, and Acer pseudosieboldianum, Styrax obassia, Magnolia sieboldii, Lindera erythrocarpa, and Aralia elata showed good growth in the northeastern slope. There was a difference between slopes in Basal area. It was decreased at the southwestern slopes during the 10th year continuously and it was increased the sixth year however, was decreased after the eighth year at the northeastern slope.