• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.353-358
• /
• 2010

This research introduces a new and improved design for a pneumatic cylinder driven roll feeder wherein each of the principal rotating feeder parts is configured so as to have feeding accuracy and to be low manufacturing cost. The feed pitch accuracy of the proposed roll feeder was evaluated by measuring lengths of cut offs of the strip stock with a shear attached to an air press. The air press was designed, manufactured, and mounted on the same table of the proposed roll feeder such that the strip stock maintained horizontal plane until the strip stock entered into the shear. The proposed roll feeder and the air press were designed to be operated automatically by a PLC employed controller. The feed pitch accuracy of the proposed roll feeder was analyzed by setting the pitch as 10, 12.5, and 15mm. At each predetermined feed pitch, the proposed roll feeder was tested 300 times as one test set and replicated three times. The average lengths of the cut offs of the strip stock ranged from 9.98 to 10.13mm, from 12.42 to 12.57mm, and from 14.96 to 15.06mm at the predetermined 10, 12.5, and 15mm feed pitch, respectively, among the total of 900 samples of each feed pitch. Main cause of variation of the length of the cut off of the strip stock fed by the proposed roll feeder was considered to be fluctuation of the air press during recompressing period of the air compressor to pressurize the air in the air tank. The largest difference between the maximum and the minimum length of the cut off was appeared while the air compressor recompressing the air. The air compressor used for this study restricted the air delivered to the proposed roll feeder while it was still running. Thus, this air delivery restriction problem should be improved by stabilizing the air press while the proposed roll feeder is running.

• 한국국방경영분석학회지
• /
• 제11권1호
• /
• pp.79-86
• /
• 1985

A multi-interchange simplex method is presented. This method tries to cut almost half of the set of convex combinations which generate all decreasing feasible directions. Analysis of this method indicates high possibility of the existence of polynomial-time simplex-type methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1979년도 하계 전자.전기연합학술발표회논문집
• /
• pp.138-141
• /
• 1979

The purpose of this paper is to develop an efficient model for the analysis of a John's Chopper Circuit. In the John's Chopper Circuit analysis, the open branches are removed from the associated graph to formulate the modified incidence matrix. An algorithm for the generation of a modified proper tree and fundamental cut set matrix from a network graph is developed, which utilizes much less computer storage space and computation time compared to the classical methods.

• 전기의세계
• /
• 제23권3호
• /
• pp.70-76
• /
• 1974

Computer is used to analyze nonlinear networks. Integrated circuits and new nonlinear elements have generated much interest in nonlinear circuit theory. A key to the understanding and analysis of nonlinear circuits is the study of characteristics for nonlinear elements and nonlinear resistive networks both in theory and in computation. In this apper, an iteration method using cut set analysis for nonlinear dc analysis based on Branin's method is described. Application of this algorithm to solve two nonlinear problems, is presented and a possible method of improving the basic algorithm by means of a sparse matrix technique is described.

• 전기의세계
• /
• 제30권5호
• /
• pp.297-305
• /
• 1981

The problem of finding shortest paths between every pair of points in a network is solved employing and optimal network decomposition in which the network is decomposed into a number of subnetworks minimizing the number of cut-set between them while each subnetwork is constrained by a size limit. Shortest path computations are performed on individual subnetworks, and the solutions are recomposed to obtain the solution of the original network. The method when applied to large scale networks significantly reduces core requirement and computation time. This is demonstrated by developing a computer program based on the method and applying it to 30-vertex, 160-vertex, and 273-vertex networks.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.38-40
• /
• 2000

In this paper we propose a calculation method for fuzzy control based on quantized $\alpha$-cut decomposition of fuzzy sets. This method is easy to be implemented in analog hardware. The effect of quantization levels on defuzzified fuzzy inference results is investigated. A few quantization levels are sufficient for fuzzy control. The hardware implementation of this calculation method and the defuzzification by gravity center method by PWM are also presented.

• Kyungpook Mathematical Journal
• /
• 제54권2호
• /
• pp.197-201
• /
• 2014

In this paper, we study some properties of finite or infinite poset P determined by properties of the ideal based zero-divisor graph properties $G_J(P)$, for an ideal J of P.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1045-1048
• /
• 1999

In this paper, we report on a set of new algorithms to realize a nonlinear compressed-domain video/audio editor that overcomes various realization problems. For efficiency, the underlying algorithm, which uses a central data structure in the form of doubled linked lists, performs soft edits of cut and paste (which, in turn, involves soft implementations of frame type conversion) and addresses problems relating to video/audio synchronization and random access, and decoder buffer control.

• 소성∙가공
• /
• 제6권6호
• /
• pp.500-507
• /
• 1997

The conventional closed-die forgings had been applied to the forging of spur gears. But the forgings require high forging-pressure. In this paper, new precision forging technology have been developed. The developed technology is two steps forging process. Good shaped products are forged successfully with lower forging-pressure than those of conventional forging. The accuracy of the forged spur gear obtained by new precision forging technology is set nearly equal to that of cut spur gear of fourth and fifth class in Korean industrial standard.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1266-1269
• /
• 1993

The paper introduces a new method for fuzzy processing. The method allows handing a piece of information lost in the classic fuzzification process, and thus neglected by other methods. Processing the result after fuzzification is sustained by the interpretation that the input-output set mapping, specified by the IF-THEN rules, can be regarded as a direct mapping of their corresponding alpha-cuts. Processing involves just singletons as intermediary results, the final result being a combination of singletons obtained from fired rules.