• 대한방사선기술학회지:방사선기술과학
• /
• 제41권4호
• /
• pp.305-312
• /
• 2018

The incidence of cardiovascular disease increases rapidly after 40's. The thickness of the epicardial adipose tissue was measured to analyze the risk factors affecting the thickness change. We present the cut off value for the epicardial adipose tissue thickness for high impacted variables. For the study, 547 patients underwent echocardiography, epicardial adipose tissue thickness, body mass index, abdominal subcutaneous fat thickness and diabetes mellitus were used as analytical variables. As a result, multiple regression analysis of age group showed that diabetes mellitus was highly influential in all age group, so we could predict the cut off value for the epicardial adipose tissue thickness for diabetes mellitus. As a result of ROC curve analysis, cut off value of 7.44 mm was obtained with sensitivity of 79.6% and specificity of 60.6% for diab etes variab le. Logistic regression analysis b ased on this value showed that the risk for diab etes increased 6 times with each increase in the thickness of the epicardial adipose tissue. Among the various obesity indexes, epicardial adipose tissue is used as an important index especially to prevent the risk of cardiovascular disease. Therefore, we suggest that the use of echocardiography as a routine screening method for the prevention of cardiovascular disease and metabolic syndrome, which is rapidly increasing in patients over 40's age, will enable more effective monitoring. Radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium.

• Communications for Statistical Applications and Methods
• /
• 제15권6호
• /
• pp.883-897
• /
• 2008

2006년 통계청이 시행한 광업 제조업 통계조사 결과(2005년 실적치)를 모집단으로 사용하면 최근 동향을 반영한 표본설계가 가능하다. 본 논문은 기존의 12개 업종보다 세분화된 94개 세부업종에 분류에 따라 매월 부품 소재산업의 생산, 출하, 재고의 변동사항을 조사하여 부품 소재산업의 경기변동실태를 파악하고 부품 소재산업의 육성정책 및 기업경영의 기초자료를 제공할 수 있는 새로운 표본설계를 제안한다. 표본설계는 응용절사법과 주성분을 이용한 다변량 네이만 배정법을 이용하여 층별로 표본크기를 결정하여 배정하고 표본추출은 확률비례계통추출을 사용한다.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.9-16
• /
• 1997

본 논문은 오염지역 또는 폐기물 매립지의 오염 차단용으로 사용될 수 있는 연직차폐기술을 연구하였다. 이를 위하여 슬러리월 재료에 대한 투수 및 화학반응실험을 통하여 적절한 배합비를 갖은 흙-벤토나이트, 시멘트-벤토나이트, 시멘트l플라이애쉬-벤토나이트, 플라스틱 콘크리트 혼합재료를 제시하였다. 벤토나이트 슬러리의 침출수 반응성 실험결과, 화학물질의 영향에 의하여 벤토나이트 슬러리가 국부적으로 응집이 이루어지고, 슬러리 현탁액이 제대로 형성되지 않는 현상이 발생하였다. 뒤채움재의 투수시험 결과, 시멘트-벤토나이트. 플라스틱 콘크리트, 흙-벤토나이트 순으로 투수 계수가 작게 나타났으며, 침출수와의 반응실험결과, 투수성은 약간 증가하는 것으로 나타났으나 큰 영향은 없는 것으로 나타났다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.210-216
• /
• 1997

The th ermal and optical properties of multicomponent oxide glass optical fiber by adding heavy metal oxide Ga$_{2}$O$_{3}$(0-20wt%) were investigated. The fiber samples were made by the method of rod in tube. The optical loss of fiber was measured in 0.3-1.8.mu.m wavelength region. As Ga$_{2}$O$_{3}$ increased up to 20wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 579.deg. C and from 548.deg. C to 641.deg. C, respectively. Whereas the thermal expansion coefficient was decreased from 102 to 79.1x10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.665, and IR cut-off wavelength was enlarged from 4.64.mu.m to 6.1.mu.m. The optical loss of fiber was remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1047-1052
• /
• 1996

In this study, the thermal and optical proper-ties of multicomponent oxide glass fiber for IR sensor by adding heavy metal oxide Ga$_{2}$O$_{3}$ were investigated. The fiber samples were made by rod-in tube method. The optical loss of fiber was measured in 0.3-1.8/M wavelength region. As Ga$_{2}$O$_{3}$ increased up to 12wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 564.deg. C and from 548.deg. C to 612.deg. C respectively. Whereas the thermal expansion coefficient was decreased from 102 to 88.2*10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.662, and IR cut-off wavelength was enlarged from 4.64.mu.m to 5.22.mu.m. The optical loss of fiber was decreased and more remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.107-108
• /
• 2019

The interlayer noise of the apartment house is a typical problem that reduces the quality of the residential environment. Therefore, many researchers have developed soundproofing materials that blocks noise between floors. However, most development technologies do not have the noise cut-off effect felt by residents, and may also have a defect in long-term deflection. In this respect, this study developed high-performance interlayer soundproofing material that can overcome existing problems. The developed technology has the noise reduction effect experienced by the residents and it has high durability without long-term deflection. Therefore, high-performance interlayer soundproofing material is expected to contribute to reducing disputes over noise between floors of apartment residents.

• Geomechanics and Engineering
• /
• 제19권4호
• /
• pp.361-368
• /
• 2019

This study aims to evaluate the applicability of a grout material that is mixed with carbon fiber, biogrout, ground granulated blast furnace slag (GGBS) powder and cement. Uniaxial compressive strength tests were performed on homo-gel samples at days of 1, 3, 7, 14 and 28. In addition, the variation of permeability with the mixing ratios was measured. Based on the uniaxial compressive strength test, it was confirmed that the uniaxial compressive strength increased by 1.2times when carbon fiber increased by 1%. In addition, as a result of the permeability test, it was found that when the GGBS increased by 20%, the permeability coefficient decreased by about 1.5times. Therefore, the developed grout material can be used as a cutoff grouting material in the field due to its strength and cut-off effect.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.424-428
• /
• 2010

This paper describes the design and analysis of AlN piezoelectric micro energy harvester. The harvester was designed to convert ambient vibration energy to electrical power as a AlN piezoelectric material compatible with CMOS (complementary metal oxide semiconductor) process. To cut off the leakage current, AlN was used as the insulating layer. Also, Mo was used for the excellent c-axis crystal growth as the bottom electrode. The AlN harvester which it has the low operating frequency was designed by using the ANSYS FEA (finite element analysis). From the simulation results, the resonance frequency of designed model is about 360 Hz and analyzed the bending mode, displacement and expectation output.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.350-353
• /
• 2005

It is a feature of primary importance for a backing material for circular saw blades having teeth which are tipped with cermet, that the steel has not a too high hardenability in order that the backing material shall not be completely hardened through brazing, welding or grinding, etc. in connection with the finishing operation in the manufacturing of circular saw blade. It is believed that V-(2Mo+W) added steel from this point of view had best conditions. Using V-(2Mo+W) added backing steel, the tool failure can be effectively prevented due to superior damping performance.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.431-438
• /
• 2005

In this paper, we propose the built-in current testing circuit for improving reliability As the integrated CMOS circuits in a chip are increased, the testability on design and fabrication should be considered to reduce the cost of testing and to guarantee the reliability In addition, the high degree of integration makes more failures which are different from conventional static failures and introduced by the short between transistor nodes and the bridging fault. The proposed built-in current testing method is useful for detecting not only these failures but also low current level failures and faster than conventional method. In normal mode, the detecting circuit is turned off to eliminate the degradation of CUT(Circuits Under Testing). The differential input stage in detecting circuit prevents the degradation of CUT in test mode. It is expected that this circuit improves the quality of semiconductor products, the reliability and the testability.