Geomechanics and Engineering

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Study on the characteristics of grout material using ground granulated blast furnace slag and carbon fiber

  • Kim, Daehyeon (Department of Civil Engineering, Chosun University) ;
  • Park, Kyungho (Department of Civil Engineering, Chosun University)
  • Received : 2019.05.09
  • Accepted : 2019.11.18
  • Published : 2019.11.20
⟨ Previous Next ⟩

Abstract

This study aims to evaluate the applicability of a grout material that is mixed with carbon fiber, biogrout, ground granulated blast furnace slag (GGBS) powder and cement. Uniaxial compressive strength tests were performed on homo-gel samples at days of 1, 3, 7, 14 and 28. In addition, the variation of permeability with the mixing ratios was measured. Based on the uniaxial compressive strength test, it was confirmed that the uniaxial compressive strength increased by 1.2times when carbon fiber increased by 1%. In addition, as a result of the permeability test, it was found that when the GGBS increased by 20%, the permeability coefficient decreased by about 1.5times. Therefore, the developed grout material can be used as a cutoff grouting material in the field due to its strength and cut-off effect.

Keywords

Acknowledgement

Supported by : Chosun University

References

  1. Babu, K.G. and Kumar, V.S.R. (2000), "Efficiency of GGBS in concrete", Cement Concrete, 30, 1031-1036. https://doi.org/10.1016/S0008-8846(00)00271-4.
  2. Cheon, B.S. (1998), Grouting Injection Method, Goomibook, Seoul, Korea.
  3. Cho, S.K. (2013), "An experimental study on the workability and engineering properties of concrete using ground granulated blast furnace slag", Soc. Convergence Knowledge J., 1(1), 43-50.
  4. Gaurav, S., Souvik, D., Abdulaziz, A.A., Showmen, S. and Sommath, K. (2015), "Study of granulated blast furnace slag as fine aggregates in concrete for sustainable infrastructure", Proc. Soc. Behav. Sci., 195, 2272-2279. https://doi.org/10.1016/j.sbspro.2015.06.316.
  5. Glossop, R. (1960), "The invention and development of injection processes", Geotechnique, 10(3), 90-100. https://doi.org/10.1680/geot.1960.10.3.91.
  6. Han, C.G., Kim, S.H. and Son, H.J. (2009), "Engineering characteristics analysis of high strength concrete followed in replacement ratio increase in blast furnace slag", J. Kor. Recycled Construct. Resour. Inst., 10(7), 62-68.
  7. Khajuria, C. and Siddique, R. (2014), "Use of iron slag as partial replacement of sand to concrete", Int. J. Sci. Eng. Technol. Res., 3(6), 1877-1880.
  8. Kim, D. and Park, K. (2017), "Evaluation of the grouting in the sandy ground using bio injection material", Geomech. Eng., 12(5), 739-752. https://doi.org/10.12989/gae. 2017.12.5.739.
  9. Kim, D.Y., Cho, H.K. and Lee, H.S. (2014), "Effects of the reaction degree of ground granulated blast furnace slag on the properties of cement past", Geomech. Eng., 26(6), 723-730. http://dx.doi.org/10.4334/JKCI.2014.26.6.723.
  10. Kim, J.H., Han, M.C. and Han, C.G. (2014), "Strength development of the concrete incorporating blast furnace slag and recycled aggregate as alkali activator", J. Kor. Recycled Construct. Resour. Inst., 2(2), 107-115. https://doi.org/10.14190/JRCR.2014.2.2.107.
  11. Kim, T.W. and Hahm, H.G. (2015), "The strength properties activated granulated ground blast furnace slag with aluminum potassium sulfate and sodium hydroxide", Geomech. Eng., 27(2), 95-102. http://dx.doi.org/10.4334/JKC I.2015.27.2.095.
  12. Kutzner, C. (1996), Grouting of Rock and Soil, A.A Balkema Publishers, New York, U.S.A.
  13. Lee, H.H. (2016), "Material capacity evaluation of concrete using blast furnace slag powder and recycled coarse aggregate", Proceedings of the Architectural Institute of Korea Fall Conference.
  14. Min, K.S. and Lee, S.H. (2007), "Resistance of alkali activated slag cement mortar to sulfuric acid attack", J. Kor. Cer. Soc., 44(11), 633-638. https://doi.org/10.4191/KCERS.2007.44.1.633.
  15. Oner, A. and Akyuz, S. (2007), "An experimental study on optimum usage of GGBS for the compressive strength of concrete", Cement Concrete Compos., 29, 505-514. https://doi.org/10.1016/j.cemconcomp.2007.01.001
  16. Park, W.C., Mun, K.J. Jung, J.J. and Soh, Y.S. (2004), "Evaluation on the physical properties of ultra fine cement for grouting materials", Proceedings of the Korea Concrete Institute Fall Conference.
  17. Pradhan, K. and Mohanty, C.R. (2017), "Stabilization of expansive soil using industrial wastes", Geomech. Eng., 12(1), 111-125. https://doi.org/10.12989/gae.2017.12.1.111.
  18. Rabbani, P., Daghigh, Y., Atrechian, M.R., Karimi, M. and Tolooiyan, A. (2012), "The potential of lime and grand granulated blast furnace slag(GGBFS) mixture for stabilization of desert silty sands", J. Civ. Eng. Res., 2(6), 108-119. https://doi.org/10.5923/j.jce.20120206.07.
  19. Sanderson, R.A., Cann, G.M. and Provis, J.L. (2018), "The effect of blast-furnace slag particle size on the hydration of slag-Portland cement grouts at elevated temperatures", Adv. Cement Res., 30(8), 337-344. https://doi.org/10.1680/jadcr.17.00136.
  20. Seo, H., Park, K.H., Kim, C.J., Kim, H.C. and Kim, D. (2019), "Development of reinforcement grout materials using blast furnace slag powder and aramid fiber", J. Kor. Geosynth. Soc., 18(1), 67-77. http://doi.org/10.12814/jkgss.2019.18.1.067.
  21. Shi, C. and Day, R.L. (1995), "A calorimetric study of early hydration of alkali-slag cement", Cement Concrete Res., 25(6), 1333-1346. https://doi.org/10.1016/0008-8846(95)00126-w.
  22. Shucai, L., Fei, S., Wei, L. and Rentai, L. (2017), "Properties of cement-based grouts with high amounts of ground granulated blast furnace slag and fly ash", J. Mater. Civ. Eng., 29(11), 1-11. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002083.
  23. Sidik, W.S., Canakci, H., Kilic, I.H. and Celik, F. (2014), "Applicability of biocementation for organic soil and its effect on permeability", Geomech. Eng., 7(6), 649-663. https://doi.org/10.12989/gae.2014.7.6.649.
  24. Sudarvizhi M.S. and Ilangovan, R. (2011), "Performance of copper slag and ferrous slag as partial replacement of sand in concrete", Int. J. Civ. Struct. Eng., 1(4), 918-927.
  25. Yadu, L. and Tripathi, R.K. (2013), "Effectiveness of granulated blast furnace slag over sand as overay for the stabilization of soft clay", Int. J. Adv. Technol. Civ. Eng., 2(2), 32-37.
  26. Zhang, J., Li, S., Li, Z., Zhang, Q., Li, H., Du, J. and Qi, Y. (2019), "Properties of fresh and hardened geopolymer-based grouts", Ceramics-Silikaty, 63(2), 164-174. https://doi.org/10.13168/cs.2019.0008.

Cited by

  1. Dynamic stability analysis of rock tunnels subjected to impact loading with varying UCS vol.24, pp.6, 2019, https://doi.org/10.12989/gae.2021.24.6.505