• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.560-563
• /
• 2009

A new spray chrysanthemum(Dendranthema grandiflorum) cultivar, "Golden Eye" was developed from a cross between "Rosa" and "Angaesoguk" by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services(ARES) from 2004 to 2008. Its characteristics were investigated three times from 2006 to 2008 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of "Golden Eye" was October 23th, and year-round production was possible by day length treatment. This cultivar was yellow in color, single in flower type for the spray type cut flower. Its capitulum was 2.4cm in diameter, and had 23.2 head per stem in autumn. Its ray floret was green central zone. The days to flowering under the short day treatment is about 49 days in spring season, and "Golden Eye" showed the vase life of 25.7 days in autumn. This cultivar was registered for a commercialization in 2008.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.295-298
• /
• 2010

A new spray chrysanthemum(Dendranthema grandiflorum) cultivar, 'Biz' was developed from a cross between 'S03-117' and 'Angaesoguk' by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services(ARES) from 2003 to 2008. Its characteristics were investigated three times from 2006 to 2008 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Biz' was October 26th, and year-round production was possible by day length treatment. This cultivar was white in color, single in flower type for the spray type cut flower. Its capitulum was 3.0 cm in diameter, and had 15.6 head per stem in autumn. Its ray floret was green central zone. The days to flowering under the short day treatment is about 42 days in spring season, and 'Biz' showed the vase life of 24.1 days in autumn. This cultivar was registered for a commercialization in 2008.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2009

This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Gama' bred in Korea by foliar application of daminozide (DMZ), suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stages (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Both cut flower length and peduncle length showed the greatest suppression of elongation by DMZ treatments at stage II. DMZ also gradually reduced values of those in a concentration-dependant manner. Stem thickness and flower diameter reduced compared to control as DMZ was sprayed at later stage and those two characteristics decreased in a concentration-dependant manner. The number of paralleled flowers neighboring apical part of whole plant showed the best results at stage I and II. As for DMZ concentration, those increased effectively at $500-1,000mg{\cdot}L^{-1}$. Among all combinations, $1,000mg{\cdot}L^{-1}$ DMZ at stage II recorded the most paralleled flowers and showed 24.2% increment as compared to control. The number of fully expanded flowers and total floral buds also showed the highest values using $1,000mg{\cdot}L^{-1}$ DMZ at stage II than the other treatments. In cut spray chrysanthemum cultivar 'Gama' bred in Korea, foliar-spraying with $1,000mg{\cdot}L^{-1}$ DMZ at stage II most effectively suppressed excessive peduncle elongation, parallelled flower cluster arrangement, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length, stem thickness, and flower diameter. Therefore, we recommended that foliar-spraying stage and DMZ concentration was stage I and $1,000mg{\cdot}L^{-1}$, respectively, in a practical culture for 'Gama'.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.746-754
• /
• 1996

Grading and sorting fresh cut flowers are time consuming process. In Korea, cut flowers are sorted mostly by human inspection due to the lack of adequate machinery. In this paper, quality evaluation factors of cut flowers are discussed, and types of sorting machines existing in the market are introduced . Aspects of computer image processing in evaluation the quality of cut flowers are also discussed.

• Journal of the Korean Society of Floral Art and Design
• /
• no.40
• /
• pp.77-96
• /
• 2019

This study was conducted to grasp distribution of native plants in flower market and uses of native plants in floral decoration. This study was investigated native plants sold in flower market(2017.01-2017.12) and their monthly sales. Also, this study analyzed the use of native plants, frequency of native plants classified by form and color of native plants used for floral decoration in flower magazines 'Fleur' and 'The Flower'. Among 172 species distributed cut-flower, native plants in Korea flower market are only 24 species(14.0%). Number of filler flower(15 species) is more than other forms. Native plants used in 'Fleur' and 'The Flower' were 14 species(10.2%) and 17 species(9.6%), it is meaning that native plants were less used than foreign plants. The number of filler flower was the highest in both magazines, but form flower(299 works) in 'Fleur' and mass flower(571 works) in 'The Flower' are used most frequently. According to color analysis of native plants used for floral decoration, P(purple), PB(navy) and RP(reddish purple) were 57% of the total. It can be increased native plants uses in flower decoration with developing form and mass flower considering color preference.

• Journal of People, Plants, and Environment
• /
• v.22 no.3
• /
• pp.233-239
• /
• 2019

This study was conducted in order to predict the vase life of cut lily 'Woori Tower' flowers using a non-destructive thermal imaging technique. It was found that the temperature of cut lily flowers was maintained at 20℃ and was slightly lower than the air temperature until they bloomed. On the 11th day, when flowers bloomed, the temperature of leaves and flowers was measured to be 18.75±0.38℃ and 19.23±0.32℃ respectively, and their difference with ambient temperature was over 3℃. The flower temperature increased slightly when the vase life of cut lily flowers ended, and the temperature difference between the air and leaf temperature (1.77℃) and between the air and flower temperature (1.39℃) got smaller. No visible aging symptom was observed, but it was found that the temperature had risen due to water losses and less functional stomata. The vase life of cut lily flowers can be predicted based on changes in temperature and it will be also possible to predict the potential quality and vase life of cut flowers before harvesting them in greenhouses.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.297-303
• /
• 2013

This study was carried out to examine the effect of Red LED (660 nm) and fluorescent lamp for night break (NB) treatments of each 3 hours (22:30-01:30), 4 hours (22:00-02:00) and 5 hours (21:30-:02:30) per day for 53 days on flower bud initiation and growth in Chrysanthemum cv. 'Baekma' and cv. 'Jinba'. The days to flower budding after short-day treatment in 'Baekma' was longer at fluorescent lamp 4 hr (21.0 days) and 5 hr (20.5 days) NB, and it was shorter at Red LED 3 hr (14.2 days). The days to flowering after short-day treatment in 'Baekma' was longer at fluorescent lamp 4 hr (54.0 days), 5 hr (53.5 days) NB, and Red LED 5 hr (53.3 days), and it was shortest at Red LED 3 hr (50.2 days) NB treatment among all treatments. The days to flower budding after short-day treatment of 'Jinba' was longer at fluorescent lamp 4 hr (20.6 days) and was shorter at Red LED 3 hr (14.1 days) among all treatments. Similarly, the days to flowering after short-day treatment of 'Jinba' was longer at fluorescent lamp 4 hr (55.3 days) and was shortest at Red LED 3 hr (50.2 days) among all treatments. Therefore, inhibition of flower bud initiation was the most effective under fluorescent lamp 4 hr treatment. The length of cut flower of 'Baekma' was increased by fluorescent lamp 4 hr, 5 hr, and Red LED 5 hr, but of 'Jinba' was longer at LED 4 hr and 5 hr treatment. The weight of cut flower of 'Baekma' was heaviest at fluorescent lamp 5 hr treatment and was at Red LED 5hr treatment for 'Jinba' even though there was not statistically significant difference between 'Baekma' and 'Jinba'. Consequently, under fluorescent lamp 4 hr for night break was the most effective on flower bud initiation, flowering inhibition and cut-flower characteristics in 'Baekma' and 'Jinba'.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.209-215
• /
• 2018

The survey conducted with 120 florists in Korean domestic flower shops to investigate the use and awareness of floral preservatives in Korea. As a result, only 19.8% of the domestic florists use floral preservatives frequently in their shops, whereas 45.5% do not use them at all, suggesting very low use frequency. Korean domestic florists considered the use of floral preservatives mostly for storing cut flowers to preventing bacteria growth. For the reasons not to use floral preservatives, 51.4% of the Korean domestic florists did not value its usefulness, showing a lack of awareness of floral preservatives. However, 44.2% of the florists who had the experience with floral preservatives satisfied with the effect of floral preservatives, and 49.5% of the respondents positively answered to recommend floral preservatives to others. General awareness on floral preservatives among Korean domestic florists was positive. 50.5% of the florists with the experience with the floral preservative had the high intention to re-purchase the flower preservatives. The low use frequency and lack of recognition of floral preservatives in Korea were likely due to very few floral preservative brands and little advertising. However, the high satisfaction level and repurchase intention rate shown by the florists indicates that increasing advertising and education for the floral preservatives would improve the accessibility and awareness of the products and their effects increasing the opportunity to use floral preservatives among Korean domestic florists, further enhancing consumers' satisfaction by improving the cut flower quality and its vase life.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.655-665
• /
• 2020

Background and objective: This study was conducted to compare the cultivation environment, growth of cut flowers, and management performance of conventional farms and smart farms growing the standard cut chrysanthemum, 'Jinba'. Methods: Conventional and smart farms were selected, and facility information, cultivation environment, cut flower growth, and management performance were investigated. Results: The conventional and smart farms were located in Muan, Jeollanam-do, and conventional farming involved cultivating with soil culture in a plastic greenhouse, while the smart farm was cultivating with hydroponics in a plastic greenhouse. The conventional farm did not have sensors for environmental measurement such as light intensity and temperature and pH and EC sensors for fertigation, and all systems, including roof window, side window, thermal screen, and shading curtain, were operated manually. On the other hand, the smart farm was equipped with sensors for measuring the environment and nutrient solution, and was automatically controlled. The day and night mean temperatures, relative humidity, and solar radiation in the facilities of the conventional and the smart farm were managed similarly. But in the floral differentiation stage, the floral differentiation was delayed, as the night temperature of conventional farm was managed as low as 17.7℃ which was lower than smart farm. Accordingly, the harvest of cut flowers by the conventional farm was delayed to 35 days later than that of the smart farm. Also, soil moisture and EC of the conventional farm were unnecessarily kept higher than those of the smart farm in the early growth stage, and then were maintained relatively low during the period after floral differentiation, when a lot of water and nutrients were required. Therefore, growth of cut flower, cut flower length, number of leaves, flower diameter, and weight were poorer in the conventional farm than in the smart farm. In terms of management performance, yield and sales price were 10% and 38% higher for the smart farm than for the conventional farm, respectively. Also, the net income was 2,298 thousand won more for the smart farm than for the conventional farm. Conclusion: It was suggested that the improved growth of cut flowers and high management performance of the smart farm were due to precise environment management for growth by the automatic control and sensor.