• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.276-279
• /
• 1995

This paper is re;ated to the splits at the side of chips and the changes of surface roughness according to cutting conditions in precsion cutting. Compared with MCD, the surface roughness of workpiece cut by PCD was inferior at a small feed. But, there were no significant difference between MCD and PCD tool above a certain feed in surface roughness

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.141-153
• /
• 2019

This research deals with wave propagation of the functionally graded (FG) nano-beams based on the nonlocal elasticity theory considering surface and flexoelectric effects. The FG nano-beam is resting in Winkler-Pasternak foundation. It is assumed that the material properties of the nano-beam changes continuously along the thickness direction according to simple power-law form. In order to include coupling of strain gradients and electrical polarizations in governing equations of motion, the nonlocal non-classical nano-beam model containg flexoelectric effect is used. Also, the effects of surface elasticity, dielectricity and piezoelectricity as well as bulk flexoelectricity are all taken into consideration. The governing equations of motion are derived using Hamilton principle based on first shear deformation beam theory (FSDBT) and also considering residual surface stresses. The analytical method is used to calculate phase velocity of wave propagation in FG nano-beam as well as cut-off frequency. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as flexoelectric coefficients of the surface, bulk and residual surface stresses, Winkler and shear coefficients of foundation, power gradient index of FG material, and geometric dimensions on the wave propagation characteristics of FG nano-beam. The numerical results indicate that considering surface effects/flexoelectric property caused phase velocity increases/decreases in low wave number range, respectively. The influences of aforementioned parameters on the occurrence cut-off frequency point are very small.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.120-126
• /
• 2002

The needs of ultra-precisely machined parts are increasing more and more. But the experimental data required to ultra precision machining of nonferrous metal is insufficient. The behavior of cutting in micro cutting area is different from that of traditional cutting because of the size effect. Copper is widely used as optical parts such as LASER reflector's mirror and multimedia instrument. In experimental, after oxygen-free copper is machined by ultra precision machine with natural mono crystal diamond tool (NCD) and synthetic poly crystal diamond tool (PCD), we compared chip formation and tool's wear according to used tool. Also, we researched optimized cutting condition with the results measured according to cutting condition such as spindle speed, feed rate and depth of cut. As a result, the optimal working condition that makes good surface roughness is obtained. The surface roughness is good when spindle speed is above 80 m/min, and feed rate is small and depth of cut is above 0.5 ${\mu}{\textrm}{m}$. In cutting of klystron anode and cavity 3.2 nmRa of surface roughness is obtained.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1102-1110
• /
• 2005

본 논문에서는 기존 복셀 칼라링 기법에서의 색상 일관성에 대한 문턱값 문제를 해결하기 위한 개선된 복셀 칼라링 기법을 제안하였다. 제안 기법에서는 표면 복셀에 대한 색상 일관성의 문턱값을 내부 복셀의 색상 일관성 값으로 대체함으로써 복셀 칼라링의 반복 회수가 증가함에 따라 개별 표면 복셀에 대한 최적의 문턱값을 찾아가도록 하였다. 또한 그래프 절단 기법을 적용하여 주위 복셀을 제거 판단에 함께 고려함으로써 표면 잡음을 감소시켰다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.169-173
• /
• 1993

In this paper, the features extraction of reflected signals from various type of defects existing in the solid has been studied by Wiener filtering technique. In this experiment, three types of the defect have been considered; a flat cut, a angular cut and a circular hole. All of the defects have the same size, 20mm in diameter and have been located at 45mm in depth from the aluminum surface. In the result of the experiment, it has been found that the wiener filtering technique used for features extraction from the reflected signal corresponding to each defect have been very effective for defect classification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.173-178
• /
• 1995

This paper presents a new method to obtain parameters of end-mill cutting system. For high speed milling and precision surface finish, we have to predict the deflection of tool and the critical depth of cut. The cutting system can be modeled to a vibratory system to obtain the deflection of tooll and the critical depth of cut. A new method of the modeling of one degree of freedom system was developed using bisection method, ARMA(Autoregressive Moving average) and impact test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.34-38
• /
• 1996

Cylindrical plunge grinding is widely used for final machining process of precision parts such as automobile, aircraft, measurement units. In order to make parts which have high precison accuracy and high surface integrity, it is neccessary to consider grinding characteristics. these grinding characteristics are closely related grinding force. Soin this study, to examine closely characteristics of grinding force, effects of dressing condition, depth of cut and speed ratio on grinding force are considered. As the result, It is shown that grinding forces are affected bydressing condition, depth of cut and speed ratio and that there exist threshod grinding force and it also affected by dressing conditon.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.68-72
• /
• 2012

Al2017 is typical Duralumin of self-hardening aluminum alloy. It is lightweight, formability and machinability so throughout the industries have widely used automobile, electronics, semiconductor and aircraft as material. A variety of CNC machine tool processing technology, scientific principles and experience have been studied in order to increase accuracy and productivity. Using a machining center is to constant amount of side step and cutting characteristics studied changing depth of cut, revolution per minute and feed rate.

• 소성∙가공
• /
• 제6권3호
• /
• pp.192-202
• /
• 1997

This study presents an effect of number of passes in wire-cut electric discharge machining on fine blanking dies and products. Three part fine blanking dies were produced by the difference of numbers of passes discharge machining. Brake pad was produced, through the die produced like that, the objective of this study is the improvement in surface roughness of die block and punch, life extension of die block, the decrease of second fracture dimensions, the rise of productive.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.13-19
• /
• 2010

이 연구는 다이몬드 포인트와 카바이드 버 및 SiC paper로 삭제한 상아질에 대한 자가부식 프라이머 접착제의 결합강도를 비교하고, 실험실에서 사용하는 SiC paper와 유사한 결합강도를 나타내는 회전용 삭제기구를 알아보기 위하여 시행하였다. 56개의 발거된 대구치 치관의 교합면 상아질을 노출시켜 1.2 mm의 두께의 시편을 제작한 후 8개의 군으로 분류하였다. 1군은 standard diamond point (TF-12), 2군은 fine diamond point (TF-12F). 3군은 extrafine diamond point (TF-12EF), 4군은 cross-cut carbide bur (no. 557), 5군은 plain-cut carbide bur (no. 245), 6군은 P 120-grade SiC paper, 7군은 P 220-grade SiC paper, 8군은 P 800-grade SiC paper를 사용하여 각 시편의 상아질 표면을 약 0.2 mm정도 삭제하였다. 상아질 표면에 Clearfil SE Primer와 Bond를 적용하고 Tygon tube를 이용하여 Clearfil AP-X를 충전하고 40초간 광조사 하였다. 제작된 시편은 만능시험기를 이용하여 를 미세전단 결합강도는 측정한 후, 각 군의 결합강도를 one-way ANOVA와 Tukey검정을 이용하여 분석하여 다음과 같은 결과를 얻었다. 자가부식 프라이머 접착제 사용 시 상아질에 대한 개선된 접착을 위해서는 초미세입자 다이아몬드 포인트의 사용이 추천되며, 실험실적인 연구에서 P 220-grade SiC paper의 사용은 미세입자 다이아몬드 포인트나 카바이드 버로 삭제한 상아질 면과 유사한 결합강도를 나타내었다.