• 제목/요약/키워드: Curved boundaries

검색결과 41건 처리시간 0.024초

항공라이다 데이터의 건물 곡선경계 추출 및 모델링 (Extraction and Modeling of Curved Building Boundaries from Airborne Lidar Data)

  • 이정호;김용일
    • 대한공간정보학회지
    • /
    • 제20권4호
    • /
    • pp.117-125
    • /
    • 2012
  • 항공라이다 데이터를 이용한 건물 추출 연구가 많이 진행되어 오고 있으나 대부분의 연구는 건물경계를 직선으로 가정하기 때문에 곡선경계가 포함된 건물의 경계를 올바르게 모델링하지 못하는 한계가 있다. 본 논문은 곡선경계를 포함하는 건물을 항공라이다 데이터로부터 직선과 곡선이 혼합된 경계로 모델링하는 것을 목적으로 한다. 건물점들에 대하여 적응적 컨벡스헐 알고리즘과 큰 반경의 국지적 컨벡스헐 알고리즘을 적용하여 두 세트의 경계점을 추출한다. 경계점들의 평균 점 간격 및 수직이등분선의 교차 비율에 의하여 곡선 세그먼트를 판별한 후, 직선과 곡선 세그먼트에 대하여 각각 다른 정규화 방법을 적용하여 건물경계를 모델링한다. 실험결과, 곡선 세그먼트의 추출 완전성과 정확성이 각각 69%, 100%로서 본 연구의 방법을 통해 대부분의 곡선경계를 올바르게 추출 및 모델링 할 수 있었다. 본 연구의 결과는 수치지도 제작기준을 만족하는 건물경계를 자동으로 생성하는데 효과적으로 활용될 수 있을 것이다.

탄성학 문제의 경계적분방정식에서 초특이해 커널의 해법

  • 윤승원
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 춘계학술대회 논문집
    • /
    • pp.573-577
    • /
    • 1995
  • An integration method for the hypersingular kernels, in the boundary integralequations used for the solution of crack-like problems in elasticity, has been developed. To isolate the stronger singularities, the actual boundaries are replaced by the smoothly curved auxiliary boundaries which provide the detoured, non-singular integration paths. The auxiliary boundary can be interpreted as a contracted form of the actual boundaries except for the singular element where the collocating point is located. For an optimal integration path for every singular collocation point, the auxiliary boundary may have different shape depending on the position of the collocation point on the singular element.

Generalized curved beam on elastic foundation solved by transfer matrix method

  • Arici, Marcello;Granata, Michele Fabio
    • Structural Engineering and Mechanics
    • /
    • 제40권2호
    • /
    • pp.279-295
    • /
    • 2011
  • A solution of space curved bars with generalized Winkler soil found by means of Transfer Matrix Method is presented. Distributed, concentrated loads and imposed strains are applied to the beam as well as rigid or elastic boundaries are considered at the ends. The proposed approach gives the analytical and numerical exact solution for circular beams and rings, loaded in the plane or perpendicular to it. A well-approximated solution can be found for general space curved bars with complex geometry. Elastic foundation is characterized by six parameters of stiffness in different directions: three for rectilinear springs and three for rotational springs. The beam has axial, shear, bending and torsional stiffness. Numerical examples are given in order to solve practical cases of straight and curved foundations. The presented method can be applied to a wide range of problems, including the study of tanks, shells and complex foundation systems. The particular case of box girder distortion can also be studied through the beam on elastic foundation (BEF) analogy.

2차원 자동요소분할 프로그램 개발에 관한 연구 (A Study on the Two-Dimensional Automatic Mesh Generation Programming)

  • 조명철;유형선
    • 한국정밀공학회지
    • /
    • 제9권2호
    • /
    • pp.44-51
    • /
    • 1992
  • This paper is concerned with the propram of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical-line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. The new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in gereral. And the node very close to the boundary is moved to the boundary. The automatic mesh generation composed of only rectangular elements is achieved by this procedure. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptible rectangular elements for the given boundaries.

  • PDF

2차원 자동요소분할 프로그램 개발에 관한 연구 (A study on the two-dimensional automatic mesh generation programming)

  • 조명철;유형선
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.720-725
    • /
    • 1991
  • This paper is concerned with the program of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical - line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. And the new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in general. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptable elements for the given boundaries. The results of automatic mesh generation can be verified directly by drawing on the computer monitor in executing the program. And it is possible to add the processes - that is, editing, hard copying, etc - using the script file in Auto-CAD.

  • PDF

물질경계면을 갖는 판에서의 응력파에 대한 수치해석 (Numerical Simulation of Stress Waves in Plates with Material Interfaces)

  • 김경수
    • 대한조선학회논문집
    • /
    • 제32권4호
    • /
    • pp.114-122
    • /
    • 1995
  • 본 논문에서는 물질경계면을 갖는 선형탄성체에서의 응력파를 수치적으로 해석하는 기법이 소개되었으며 사각판에 대해 bicharacteristic법을 사용하여 개발된 수치해석법이 곡선경계면을 갖는 판으로 확장되었다. 제안된 개념의 효용성을 검증하기 위하여 수치해석 결과가 이론적으로 잘 알려진 응력파의 물리적 특성을 재현시켜 주는지 검토되었으며 곡선경계면을 갖는 판에 있어서 실험결과와 비교계산이 수행되었다. 또한 곡선 가장자리와 물질경계면에서 반사와 회절에 의한 응력촛점현상에 대해서도 조사되었다.

  • PDF

CeO$_2$ 도핑에 의한 불규칙 입자형상의 이트리아 안정화 지르코니아 제조 (Preparation of Yttria-stabilized Zirconia with Irregular Grain Shapes by Ceria Doping)

  • 이종국;강현희;김영정;김환
    • 한국세라믹학회지
    • /
    • 제35권12호
    • /
    • pp.1294-1300
    • /
    • 1998
  • Yttria-stabilized zirconia ceramics with irregular grain shapes and curved grain boundaries was prepared by ceria doping. The amount of ceria doped into zirconia compacts by a dipping method were at range of 2 to 20 mol% Irregular grain shapes and curved grain boundaries were formed only inspecimens doped with more than 8mol% cerial. Ceria-doped specimens showed large grain size and low sintered density compared with pure yttria-stabilized zirconia which was due to the increase in the contents of stabilizer and cubic phase. The amount of doped ceria was larger on the surface than the inside regions and therefore mi-crostructure and phase on the surface were different from those in the inside regions. Transgranular frac-ture mode was observed ion ceria doped specimens due to irregular large grain sizes.

  • PDF

유한요소법을 이용한 만곡수로에서의 2차원 하상변동 수치모형 (2D Finite Element Modeling of Bed Elevation Change in a Curved Channel)

  • 김태범;최성욱;민경덕
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회 논문집
    • /
    • pp.414-418
    • /
    • 2005
  • A finite element model is developed for the numerical simulation of bed elevation change in a curved channel. The SU/PG (Streamline-Upwind/Petrov-Galerkin) method is used to solve 2D shallow water equations and the BG (Bubnov-Galerkin) method is used for the Exner equation. For the time derivative terms, the Crank-Nicolson scheme is used. The developed model is a decoupled model in a sense that the bed elevation does not change simultaneously with the flow during the computational time step. The total load formula with is used for the sediment transport model. The slip conditions are described along the lateral boundaries. The effects of gravity force due to geometry change and the secondary flows in a curved channel are considered in the model. For the verification, the model is applied to two laboratory experiments. The first is $140^{\circ}$ bended channel data at Delft Hydraulics Laboratory and the second is $140^{\circ}$ bended channel data at Laboratory of Fluid Mechanics of the Delft University of Technology. The finite element grid is constructed with linear quadrilateral elements. It is found that the computed results are in good agreement with measured data, showing a point bar at the inner bank and a pool at the outer bank.

  • PDF

PRECONDITIONED SPECTRAL COLLOCATION METHOD ON CURVED ELEMENT DOMAINS USING THE GORDON-HALL TRANSFORMATION

  • Kim, Sang Dong;Hessari, Peyman;Shin, Byeong-Chun
    • 대한수학회보
    • /
    • 제51권2호
    • /
    • pp.595-612
    • /
    • 2014
  • The spectral collocation method for a second order elliptic boundary value problem on a domain ${\Omega}$ with curved boundaries is studied using the Gordon and Hall transformation which enables us to have a transformed elliptic problem and a square domain S = [0, h] ${\times}$ [0, h], h > 0. The preconditioned system of the spectral collocation approximation based on Legendre-Gauss-Lobatto points by the matrix based on piecewise bilinear finite element discretizations is shown to have the high order accuracy of convergence and the efficiency of the finite element preconditioner.

Depth contours appeared on SAR images by interactions between tidal current and bottom topography

  • Kim, Tae-Rim
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.692-694
    • /
    • 2006
  • X-SAR images taken on the coastal waters of Hwanghe province in Korea during SIR-C/X-SAR campaign in April and October 1994 are analysed. The SAR images show the peculiar signatures like nail marks, curved long string, and vortex streets patterns and they all seem to be produced by strong interactions between the topography in the coastal waters and tidal currents. The nail mark signatures are located at the same position of small scaled sand banks and the curved line patterns are almost identical to the outer boundary of large sand banks. Based on the tidal record, all the three images are taken at the almost same phase of tidal cycles, which are close to the low tide. It seems that bottom shapes are more strongly appeared on the SAR images when the tidal currents are slow. The front between two different current velocities caused by the flows along the steep boundaries of sandbanks is also the main factors imprinting the bottom features to the sea surface SAR images

  • PDF