• Animal Bioscience
• /
• v.34 no.4
• /
• pp.680-691
• /
• 2021

Objective: This study was conducted to investigate the effect of fermented cottonseed meal (FCSM) on growth performance, carcass traits, and fat deposition in white-feather broiler chickens. Methods: A total of 480 male one-day-old white-feather broiler chickens were selected randomly and divided into four groups with six replicates of 20 chickens in each. The experimental chickens were fed diets including 3%, 6%, or 9% FCSM fermented by Candida tropicalis until 42 days old. In the experiment, the chickens of the control group were fed soybean meal. Results: FCSM supplementation linearly decreased the feed conversion ratio from d 15 to 21 and d 36 to 42, respectively (p<0.05). The percentage of carcass and semi-eviscerate increased in response to dietary FCSM supplementation at d 21 (p<0.05). The percentage of eviscerated and semi-eviscerate of 3FCSM was higher than that in other groups at d 35 (p<0.05). At the age of 42 d, the percentage of carcass increased in a quadratic way among increasing FCSM in diets (p<0.05). The subcutaneous fat thickness linearly decreased with the increasing levels of FCSM at d 21 (p<0.05). Gompertz and Logistic functions provided a better fit on abdominal fat and subcutaneous fat, respectively. The best fitted equation predicted that the maximum growth rate of abdominal fat weight and subcutaneous fat thickness occurred at d 28. FCSM had no significant effects on the shape of growth curve of abdominal fat weight and subcutaneous fat thickness, but reduced the height of the curve. Birds receiving the 6FCSM diet for 21 d had smaller adipocyte surface and lower serum glucose as well as triglyceride concentration. Conclusion: FCSM is beneficial for broiler chickens as it positively affects their growth and carcass in addition to altering their fat deposition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.377-384
• /
• 2022

Vortex-induced vibration (VIV) occurs owing to the vortex generated from the back side of the appendages of ships and submarines during operation. Recently, the importance of high-order modes (HOMs) vibration and fatigue failure has become increasingly emphasized by increasing the speed of ships and the size of structures. In addition, predicting the vibration of HOMs is significantly necessary as the VIV becomes stronger in the fast flow speed condition than in the low flow speed condition. This study introduces a methodology according to HOMs hybrid Fluid Structure Interaction (FSI) for predicting the HOMs VIV on the hydrofoils. The HOMs FSI system is verified by comparing the VIV results from the FSI simulation with the experimental results. Finally, the effectiveness of the HOMs FSI is determined by applying the maximum von-Mises stress obtained from the VIV on the hydrofoil to the S-N curve released from Det Norske Veritas (DNV). VIV results from the HOMs FSI include the lock-in characteristics as well as a significant increase of more than 10 times compared with that of low-order modes (LOMs) FSI. In the future works, advanced studies will be required for improving cantilever boundary conditions and the shape of hydrofoils.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.11-20
• /
• 2008

The spillway type of small and midsize dams in Korea is almost overflow weir. To examine flood control capacity of overflow spillway, FLOW-3D was applied to Daesuho dam and analysis was focused on the discharge of dam spillway by changing weir shape. Overflow phases and discharges of linear labyrinth weir and curved labyrinth weir were compared with those of existing linear ogee weir. Hydraulic model experiment was performed to verify numerical result. Verification results showed that overflow behaviors and flow characteristics in the side channel by hydraulic model experiment and numerical simulation are well matched, and water surface elevation at side wall coincides with each other. When the reservoir elevation was increased up to design flood level, in case of the linear ogee weir the flow over the crest ran through smoothly in the side channel, whereas in cases of linear labyrinth weir and curved labyrinth weirs, the flow discharge was increased by 40 cms, and the flow over the weir crest, rotating counter-clockwise, was submerged in the side channel. The results of the water level-discharge curve revealed that labyrinth weir can increase discharge by 71% compared to the discharge of linear ogee weir at low reservoir elevation since it can have longer effective length. But as water surface elevation rises, the slope of water level-discharge curve of labyrinth weir becomes milder by submergence and nappe interference in the side channel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6C
• /
• pp.321-329
• /
• 2008

In this study, a series of column test as a way in order to make up for the weakness point of the conventional acceleration method were conducted to both propose the suction board drain method and grapes the specific improvement character of this method as a result of a sort of plastic drain board and a phase of vacuum pressure conditions. On this occasion, the study focused on computing the effective factors of the fittest Suction board drain method affected by each condition through confirming the settlement generated during the test, the water content reduction and stress increase effect occurred arising from the test, and the ratio of consolidation related to the improvement period. In accordance with the shape of core and that whether the core is attached to the filter(pocket or adhesion), the castle type of adhesion and the column type of pocket are more efficient than the others as a consequence of the test to find out the improvement effect depending on each drainage such as a castle type, coil type, harmonica type, column type of pocket and a castle of the adhesion. In case of the step suction pressure, the shorter the period of $-0.8\;kg/cm^2$ as a final step of the suction pressure is, the better the improvement is. In addition, the correlation between degree of consolidation per each suction pressure level and duration of application was drawn as a curve and the point of inflection on this curve was provided to determine the duration period to maximize the consolidation.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.371-377
• /
• 2017

The performance of an air conditioner is closely related to the cooling performance of a split-type outdoor unit so that, in most of the relevant preceding studies, the independent performance of an axial fan in an outdoor unit has been studied. However, there is a lack of research on the effects of other components in an outdoor units was rarely investigated. Therefore, in this paper, the effects of the fan orifice among other parts on the flow performance of the outdoor unit was numerically investigated. A virtual fan tester consisting of 18 million grids was developed for highly resolved flow simulation. The unsteady RANS (Reynolds-averaged Navier-Stokes) equations are numerically solved by using finite-volume CFD (Computational Fluid Dynamics) techniques. In order to verify the validity of the numerical methods, the predicted P-Q curve of the cooling fan in a full outdoor unit is compared with the measured one. Optimization of orifice shape was carried out for maximum flow performance of the outdoor unit using the validated numerical method.

• Resources Recycling
• /
• v.13 no.6
• /
• pp.31-36
• /
• 2004

This experiment was carried out to examine the effects of morphology on properties of La-Co substituted SrM ferrite. The magnetic properties of calcined and sintered materials were varried with the substitutional amount of La and Co elements in Sr-ferrite. In the substituted SrM ferrite, the atomic fraction x of La is directly related to the mole ratio n of iron oxide and the atomic fraction y of Co by equation x=2ny. The Hcj values of the calcined powder were about 270 kA/m and 240 kA/m with x=0.3 and x=0.2, respectively at stoichiometry, n=6.0. Crystallites of the sintered material were grown with a plate shape, and their size decreased with increasing mole ratios. Such a shape was caused by the initial state of crystallite formed after calcination. In case of x=0.3 and n=6.0, Br was 415 mT and Hcj was 355 kA/m, and in x=0.2 and n=6.0, Br was 410 mT and Hcj was 370 kA/m. The squareness in 2nd quarter of BH curve with x=0.2 was smoothly improved to compared with x=0.3.

• Parasites, Hosts and Diseases
• /
• v.22 no.1
• /
• pp.85-95
• /
• 1984

This study was performed to investigate the intestinal parasites (especially cestoda) in the guts of Theragra chalcogramma in Korea. The cestode larvae collected were morphologically observed and measured, and at the same time, microscopical study was done with the section slides of the cestode larvae. They were identified on the basis of the descriptions by Schmidt and Yamaguti. The results obtained in this study are as follows: 1. The cestode larvae were identified as Khawia sinesis, Eulacistorhynchus chiloscyllius, Tentacularia coryphaenga, Pssudonybelinia odontasantha and Nybelinia Zingualis. These are new species reported in Korea. 2. The characteristics of Khawia sinesis are its scolex lacking loculi and broad, fat and fimbriate shape. Its neck is not separated from the body but a little constricted. 3. Eulacistorhynchus chiloscyzzius is characterized by fairly long and acraspedote scolex. The bulbs are long; retractor muscles are attached to bases of the bulbs. The two bothridia are oval or round in shape and lacking posterior notch. The tentacles are long and poeciloacanthus; double chainette present. 4. Tentacularia coryphaenea is characterized by its long craspedote and subcylindrical scolex. The bothridia are separated, without free borders and spinous. The tentacles are short, slender, armed with solid hooks in spirals, similar except the base of tentacle. The tentacle sheaths are not twisted. The bulbs are ellipsoidal. 5. Pseudonybelinia odontacantha is characterized by its craspedote scolex. The tentacles are inserted near anterior margin of bothridia and armed with hooks in spirals ascending left to right. The hooks are similar, throughout tentacle, with feeble curve and provided with a tooth-like protuberance on the ventral side. The bulbs are three times longer than its width. The posterior margins of bothridia have a pair of eversible ciliated pits; or fossettes. 6. Nybelinia lingualis is characterized by its short and craspedote scolex. The bothridia are separated, with free boarders. The tentacles are cylindrical, armed with solid and similar hooks in quincunxes.

• Development and Reproduction
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Spermatogenesis and ultrastructural characteristics of sperm of brackish water diploid Corbicula japonica were investigated by electron microscope observations. Based on the cytological studies, the spermatozoon of this species (brackish water diploid) C japonica is approximately 55 ${\mu}m$ in length. The sperm head (about 12 ${\mu}m$ long) is elongated and tapers with a slight curve. Sperm nucleus is about 7.90 ${\mu}m$ long, and the acrosome is about 2.70 ${\mu}m$ long: The morphologies of the sperm nucleus type and the acrosome shape of this species are a long arrow-like type and long cone-like shape, respectively. The sperm head of this species (external fertilization, dioecious and oviparous species) is partially modified from that of the primitive type, as seen in triploid Corbicula species (internal fertilization, hermaphrodite and ovoviparous species), reported by some authors. However, this species produces uniflagellate spermatozoa, unlike freshwater triploid hermaphroditic clams being possessed of partially modified biflagellate spermatozoa. Diploid C japonica is similar to those of other bivalves being possessed of a short midpiece containing four mitochondria surrounding the centrioles. The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure, and from uniflagellate sperm cross sectioned, in particular, wing-like axonernal lateral fins are observed, as seen in external fertilization fishes.

• Water for future
• /
• v.14 no.1
• /
• pp.39-49
• /
• 1981

The purpose of this study is to examine the meander charactericstics for the rivers in Korea..In this study, the new characteristics factors of meander are proposed, and the relationships among the factors proposed in this study and the existing factors are derived. An attempt is made to find considerable relation among meander characteristics, but width and meander belt did not show any defined trend and considerable scatter of points was observed. Relationships among the meander length, belt and flowrate, etc., which are factors of meander characteristics, are analyzed the 67 rivers above 30km in length. Channel shape factor which is the ratio of the length from the starting point to the end to the channel lenght, tortuosity which is the ratio of the curved channel length against the channel length are suggested for a new characteristics factor of meander. They are well correlated with channel length, Horton's shape facotr and meander gradient, consequently have to be important measures of river meander. The result of the detailed comparison and the analysis of degree of sinuosity, velocity and water surface slop are brought light on the fact show that the curved reach is morestable than the straight one. The ratio of the meander length to the meander belt and its accumulative frequency showed excellent correlationship when plotted on the semi-log paper. The results of regression analysis of meander belt and meander length show linear for the South Han river branches and power curve for the Geum river and the Nakdong river branches.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.121-131
• /
• 2016

The determination of feasible design flood is the most important to control flood damage in river management. Concentration time and storage constant in the Clark unit hydrograph method mainly affects magnitude of peak flood and shape of hydrograph. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by empirical formula. This study is to suggest concentration time and storage constant based on the observed rainfall-runoff data at GongDo stage station in the Ansung river basin. To do this, five criteria have been suggested to compute root mean square error(RMSE) and residual of oserved value and computed one. Once concentration time and storage constant have been determined from three rainfall-runoff event selected at the station, the five criteria based on observed hydrograph and computed hydrograph by the Clark model have been computed to determine the value of concentration time and storage constant. A criteria has been proposed to determine concentration time and storage constant based on the results of the observed hydrograph and the Clark model. It has also been shown that an exponent value of concentration time-cumulative area curve should be determined based on the shape of watershed.