• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.156-164
• /
• 1999

The body structure of a bus is generally assembled by using various spot welded box sectional members. The shape of window pillar joint is ordinarily built up by T-type member. It has been shown that T-type member has problems like high stress concentrations, low fatigue strength and low structural rigidity. In this study, to solve these problems a new approach to optimize the design of the bus window pillar joint was tried by FEM analysis and experiments. To describe the shape of the gusset connecting the vertical and horizontal members of the T-type window pillar joint B-spline curve was adopted and this curve was optimized . It was found that the new model developed could effectively improve fatigue durability an structural rigidity.

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.94-101
• /
• 2002

The steam turbine rotor blade is designed using the Turbine Rotor Design Package developed by the authors. It can quickly accomplish blade shape design in the power plant industry. The quasi-3d code is employed for analysis of passage flow in the blade sections. Iterative change of each blade shape is made by moving position of control points in the Bezier curve under GUI(graphic user interface) environment. The full 3-D blade shape is obtained by stacking of the section blades.

• 산업기술연구
• /
• 제1권
• /
• pp.39-45
• /
• 1981

The typical characteristic shape of the Koryo inlaid celadon Maebyong was reviewed and the symmetry of S curve was analyzed by the method of geometric basis. The contours of Maebyongs sampled were drawn and divided with geometric rectangular proportion. The analytical results showed the static and dynamic symmetric of the vase and the ratios of height and base of the rectangles established for the analysis of their shapes were almost 1:1, 1:${\sqrt{2}}$ and 3:5(known as the Golden Ratio). The excellent beauty of the curve was principally caused by the balanced and harmonius division of the proportional rectangles. The contour line was developed along with the logarithmic spiral modified and introduced lately into the shape of Yi dynasty's liquor bottle.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2809-2815
• /
• 1999

Level set, and active contour(snakes) models are extensively used for image segmentation or shape extraction in computer vision. Snakes utilize the energy minimization concepts, and level set is based on the curve evolution in order to extract contours from image data. In general, these two models have their own drawbacks. For instance, snake acts pooly unless it is placed close to the wanted shape boundary, and it has difficult problem when image has multiple objects to be extracted. But, level set method is free of initial curve position problem, and has ability to handle topology of multiple objects. Nevertheless, level set method requires much more calculation time compared to snake model. In this paper, we use good points of two described models and also apply multi resolution algorithm in order to speed up the process without decreasing the performance of the shape extraction.

• 한국수자원학회논문집
• /
• 제55권7호
• /
• pp.557-563
• /
• 2022

수위-유량관계곡선식은 측정된 수위를 유량으로 변환하는 데 필요하며 유량측정 성과를 이용하여 개발된다. 수위-유량관계곡선식 개발에서 구간분리 위치는 수리적 특성과 하천단면 형상 등을 고려하여 결정되며 이 과정에서 개발자의 주관적인 판단이 개입되는 경우가 있다. 구간분리 위치는 수위-유량관계곡선식의 전체적인 형태를 결정할 정도로 중요하고 잘못된 구간분리는 수위-유량관계곡선식의 오류를 유발하게 되며 특히 외삽구간에서 큰 오류가 발생할 가능성이 높다. 또한 예산, 인력 등의 문제로 많지 않은 유량측정성과로 정확한 수위-유량관계곡선식을 개발하려면 하천의 단면형상 및 흐름 특성 등 수리적인 요소를 고려하여 구간을 분할해야 한다. 본 연구에서는 기존의 수위-평균유속, 수위-단면적, 수위-${\sqrt{Q}}$ 등 수리적 검토 방법을 살펴보고 이를 보완하여 구간분리 위치 결정에 있어서 주관성을 배제하고자 하였다. 구간분리 위치에 대한 적절성을 수위-유량관계곡선식 지수 (c)의 물리적인 의미를 고려하여 이를 검토하였다.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.385-392
• /
• 2010

The breast types of middle-aged women of 80A (formerly 80B) size were classified through a 3D scanned nude body. Thirty seven measurements including the radius of curvature, surface area, volume, surface length, and breast displacements were used as input variables. We extracted five main factors through the factor analysis of the measurements and classified 36 subjects into 3 clusters through the cluster analysis. As a result of the factor analysis, the size of the breast, breast sag, the curvature of the inner and the outer breast curve, the width of the breast, and the nipple direction were found as the main factors. For the results of the classification of breast types, Cluster 1 was characterized by narrow breast width and unsymmetrical under the breast curve, whereas Cluster 2 was a wide and sagged shape. Cluster 3 was classified into big breast volume and symmetrical under-breast curve. The results are useful to the product development of high quality brassieres which reflect the 3D characteristics of breast types of middle-aged women.

• 디자인학연구
• /
• 제15권1호
• /
• pp.81-92
• /
• 2002

Through network draft, it′s possible to describe curve draft with main motive in a lobby loom and to fulfill draft design more conveniently thanks to the development of computer device. Network draft was introduced by Alice Schlein, who is an American weaving artist, and I had ever published research paper on "The unfolding and development of network draft using computer dobby system" . The purpose of the next study was to develop the design of network draft while do make a design network draft in a dobby loom with 16 shafts, and could reach follow conclusion as a result of designing a variety of drafts. The initial of 4-end in a loom with 16 shafts was a basic condition to describe more perfect shape in comparison with draft in 8 shafts through the development of network. The development of draft line was essential to deride the pattern of fabric, and the pattern of draft is decided according to selecting key peg plan. Thereby, could get a variety of draft patterns derive from mix key peg plan with initial selected by developing the kind of draft line and applying diverse key peg plan. As for the variation and diversification of draft line, the shape of patters varied depending col the curve extent and connectivity of draft line and the size of curve. The pattern of network draft can be changed infinitely by free round curve of draft line. In addition, a variety of draft designs shall be developed by increasing the number of shaft, enlarging the scale of draft line, and developing more creative draft line.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.934-939
• /
• 2012

This paper proposes a new algorithm for ultrasonic sensors arranged on ring frame to identify obstacles surrounding itself by TOFs (time of flight). The ring frame has multiple channels consisting of a transmitter and a receiver. When the transmitter of a selected channel transmits ultrasonic signal, the TOFs of reflected signals from obstacles are acquired by the receiver of the channel. The process continues for all channels consecutively. Then, by using parabolic curve fitting of TOFs of all channel, the proposed algorithm not only calculates distances from multiple obstacles, but also identifies if the shape of obstacles are point or plane by the coefficients of the curve. By the experiment using 16 ultrasonic transceivers on the ring frame in the environment of two poles and two planes, we show the feasibility of the proposed scheme.