• 한국지반공학회논문집
• /
• 제24권9호
• /
• pp.41-48
• /
• 2008

본 연구에서는 수축균열 단계를 나타낼 수 있는 도해적인 방법을 제안하였다. 우선 발생된 균열들을 균열폭의 크기 순서대로 나열하여 균열 분포를 구하였다. 다음에 균열폭을 정규화하여 0에서 1사이의 값으로 나타내었다. 마지막으로 Brooks와 Corey(1964), Fredlund와 Xing(1994), van Genuchten(1980)이 제안한바 있는 S형 곡선모델에 실험 결과를 적용시켰다. 분석 결과 van Genuchten의 식이 Brooks와 Corey식보다 정확도가 크게 높은 것으로 나타났으며, Fredlund와 Xing식보다도 높게 나타나 van Genuchten의 식을 적용하였다. 결과적으로 수축균열의 단계는 정규화 된 균열폭 분포가 3개의 직선부로 나누이는 도해적인 방법으로 나타낼 수 있었다. 제안된 방법의 적용성을 보기 위해 시료의 두께에 변화를 주며 시험을 실시하였다. 측정된 데이터를 제안된 모델에 적용하여 본 결과 높은 상관성을 보여 주었다. 따라서 수축 균열은 초기수축단계, 이차수축단계 그리고 잔류수축단계의 3단계로 모사할 수 있었다. 또한 각 단계에서의 균열 폭의 범위를 제시하였다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.321-337
• /
• 1992

The objective of this study was to compare the condylar path and the anterior angle of articular fossa and to analyze the pattern of condylar path in edentulus patients. Nineteen male and female edentulous patients with normal masticatory system ranging in age 42 to 78, without present symptoms and any history of TMJ disturbance were selected for this study. On the computer analysis on the transcranial radiographs of the TMJ, the angle of slope of articular eminance and condylar path to the Frankfort Horizontal Plane and the height of glenoid fossa was measured respectively, and stuied their interrelationship comparatively. Obtained results were asfollows. 1. The angle of the slope of articular eminence averaged 37.28 degree. and there was no significant difference between the right and left side. 2. The condylar path angle averaged 29.05 degree and there was no significant difference between the right and left side. 3. The height of the glenoid fossa averaged 8.11 mm and there was no significant difference between the right and left side. 4. The sequence of the frequence of condylar movement patterns were concavex curve(39.5% ), 'S' shape curve(34.2%), reverse 'S' shape(15.8%) and convex curve(10.5%). 5. The horizontal distance of the point of the changed curve of the condylar path averaged 2.91 mm. 6. The height of glenoid fossa was highly correlated to the slope of articular eminence and relatively highly correlated to tile condylar path and the condylar path was closely correlated to the slop of articular eminence.

• Structural Engineering and Mechanics
• /
• 제14권6호
• /
• pp.733-738
• /
• 2002

A simplified rational method is developed to evaluate transverse earthquake-induced forces in continuous bridges. This method models the bridge as a beam on elastic foundation, and assumes a sinusoidal curve for both vibration mode shape and deflected shape in the transverse direction. The principle of minimum total potential is used to calculate the displacements and the earthquake-induced forces in the transverse direction. This method is concise and easy to apply, and hence, offers an attractive alternative to a lengthy and time consuming three dimensional modeling of the bridge as given by AASHTO under its Single Mode Spectral Analysis Method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.691-694
• /
• 1999

This paper presents a performance improvement technique of 2-D towed array shape estimation using Kalman filters. The proposed algorithm by linear model approximation corrects the position errors caused by the Kalman filter results. However, since the assumed linear model makes errors at bending parts, the spline interpolation algorithm based on curve is proposed to reduce the errors.

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.58-66
• /
• 2018

The use of external gear pumps is an effective way to achieve adequate performance at low cost when composing hydraulic systems. The biggest drawback, on the other hand, is the accompanying noise. Gears of continuous contact shape are actively used for the pump recently. The continuous contact shape must be the helical type due to the nature of the gear pump that is driven only by the drive gear. In this paper the theoretical shape of continuous contact gear is analyzed using simple rack shape of straight lines and two circular arcs. Using such geometry, the theoretical equation will be developed by envelope curves according to the conjugate gear shape rules. After checking the validity of the theory by the shape of gear rules, the grinding shape was also developed. The 3D shapes using equation can be also drawn. It was also shown that contact ratio and radius of curvature are easily developed by the theoretical equations.

• Journal of Animal Science and Technology
• /
• 제57권5호
• /
• pp.19.1-19.6
• /
• 2015

The objective of this study was to estimate variance components and genetic parameters for growth curve parameters in Guilan sheep. Studied traits were parameters of Brody growth model which included A (asymptotic mature weight), B (initial animal weight) and K (maturation rate). The data set and pedigree information used in this study were obtained from the Agricultural Organization of Guilan province (Rasht, Iran) and comprised 8647 growth curve records of lambs from birth to 240 days of age during 1994 to 2014. Marginal posterior distributions of parameters and variance components were estimated using TM program. The Gibbs sampler was run 300000 rounds and the first 60000 rounds were discarded as a burn-in period. Posterior mean estimates of direct heritabilities for A, B and K were 0.39, 0.23 and 0.039, respectively. Estimates of direct genetic correlation between growth curve parameters were 0.57, 0.03 and -0.01 between A-B, A-K and B-K, respectively. Estimates of direct genetic trends for A, B and K were positive and their corresponding values were $0.014{\pm}0.003$ (P < 0.001), $0.0012{\pm}0.0009$ (P > 0.05) and $0.000002{\pm}0.0001$ (P > 0.05), respectively. Residual correlations between growth curve parameters varied form -0.52 (between A-K) to 0.48 (between A-B). Also, phenotypic correlations between growth curve parameters varied form -0.49 (between A-K) to 0.47 (between A-B). The results of this study indicated that improvement of growth curve parameters of Guilan sheep seems feasible in selection programs. It is worthwhile to develop a selection strategy to obtain an appropriate shape of growth curve through changing genetically the parameters of growth model.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.590-596
• /
• 1999

The effect of evaporative cooling in alleviating seasonal variations of dairy cows raised in AlMarai Dairy Farms in the Kingdom of Saudi Arabia were studied using milking record collected during the period of 1991 to 1996. The data included 13303 and 8137 records represented winter and summer calving seasons. Evaporative cooling system improved production for cows calved in summer. The least square means of milk yield were 9631 and 9556 liter for cows calved in winter and summer seasons but no significant differences (p<0.05) were observed between the yield of two seasons. No significant effect of season on calving under evaporative cooling on most of the biweekly points of the lactation curve. The farm, parity and milk level showed a significant effect on the shape of the curve. Functions of the lactation curve like initial yield, 305 MY, peak yield, time of peak and duration were estimated for each phase of the lactation curve.

• Preventive Nutrition and Food Science
• /
• 제6권1호
• /
• pp.23-28
• /
• 2001

A study was carried out to establish a detection method of irradiated shellfish through thermoluminescence (TL). The TL intensity of first glow curves for irradiated bloody, freshwater, and short-neck shellfish increased from control until 5 kGy and increased slightly room 5 kGy until 10 kGy. Maximum TL temperatures of all irradiated samples tested were below 23$0^{\circ}C$, within temperature interval of 150~25$0^{\circ}C$ recommended for evaluation. Since just in control, glow curve ratios of G3 and G4 calculated from re-irradiated (1 kGy) bloody, freshwater and shortneck were over 0.5, detection in control was possible. However, as glow curve ratios after three months were below 0.5, detection by glow curve ratios after three months was impossible. Gl, which calculated from unirradiated samples, exhibited below 0.1, they were classified as unirradiated. In all samples, all the irradiated shellfish could be classified correctly as irradiated by hemaximum TL temperatures and shape of the second glow curve because those were shown in a lower temperature region than those of the first glow curve.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.334-341
• /
• 2004

The coefficient of permeability is one of the most important properties in unsaturated soils. The permeability varies with change in the water content as the soil water characteristic curve(SWCC) does. Thus the permeability curve of unsaturated soils has the similar shape with the soil-water characteristic curve(SWCC). Therefore, the methodologies have been studied to simply predict the unsaturated permeability from the SWCC. In this study, the experimental tests of SWCC and permeability were carried out for domestic weathered granite soils. The SWCC test results were fitted to Fredlund and Xing's SWCC equation and then it was found that there are some relationships between the parameters of SWCC equation and the basic soil properties. Accordingly we used an ANN(artificial neural network) model to obtain the SWCC parameters from the basic soil properties. Finally, the coefficients of permeability were predicted from these results by a prediction model.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.57-64
• /
• 2018

In this paper, we propose the automatic detection method for individual region separation using panorama image. Finding areas that contain individual teeth is one of the most important tasks in automating 3D models through individual tooth separation. In the conventional method, the maxillary and mandibular teeth regions are separated using a straight line or a specific CT slide, and the tooth regions are separated using a straight line in the vertical direction. In the conventional method, since the teeth are arranged in a curved shape, there is a problem that each tooth region is incorrectly detected in order to generate an accurate tooth region. This is a major obstacle to automating the creation of individual tooth models. In this study, we propose a method to find the correct tooth curve by using the jawbone curve which is very similar to the tooth curve in order to overcome the problem of finding the area containing the existing tooth. We have proposed a new method to accurately set individual tooth regions using the feature that individual teeth are arranged in a direction similar to the normal direction of the tooth alignment curve. In the proposed method, the maxillary and mandibular teeth can be more precisely separated than the conventional method, and the area including the individual teeth can be accurately set. Experiments using real dental CT images demonstrate the superiority of the proposed method.