• 대한수학회보
• /
• 제45권4호
• /
• pp.631-634
• /
• 2008

In this paper, the parabola will be characterized as the plane curve whose curvature function and support function satisfy a condition, where we define the support function as the distance from origin to the tangent line.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 1999년도 춘계공동학술대회:정보화시대의 지식경영
• /
• pp.541-544
• /
• 1999

• 대한전자공학회논문지SP
• /
• 제45권2호
• /
• pp.65-73
• /
• 2008

모바일 폰에서 사용되고 있는 카메라와 LCD 디스플레이의 정확한 색 재현을 위한 특성화 과정은 많이 알려져 있다. 카메라의 입력 신호인 CIEXYZ 색 자극 값을 LCD의 출력 신호인 CIEXYZ 값으로 정확하게 사상하기 위해서는 카메라와 LCD 특성화, 그리고 색역 사상 과정이 필요하다. 각 장치의 특성화는 입력 신호와 출력 신호 사이의 관계를 추정하는 과정이다. LCD의 경우 출력장치이기 때문에 임의의 입력에 대해 출력 색 자극 값을 측색기를 통해 측정이 가능하나 카메라와 같은 입력 장치인 경우 입력 신호를 생성할 수 없기 때문에 특성화 과정이 부정확하고 출력 신호의 획득과정에서 많은 수작업이 필요로 한다. 더욱이 노이즈에 민감한 카메라의 특성 때문에 색역 사상 후 카메라 모듈 생산 초기에 노이즈에 최적화된 감마 톤 커브가 왜곡이 되어 결과적으로 노이즈가 증가하게 된다. 이러한 문제들을 해결하고자 본 논문에서는 카메라의 출력 신호 획득 시스템과 노이즈 제거를 위한 부분적인 감마 보정 방법을 제안한다. 카메라의 출력 신호는 입력신호 사용되는 칼라 차트를 촬영하여 이미지에서의 패치 값을 읽어 획득한다. 그러나 촬영과정에서의 조명의 영향뿐만 아니라 다수의 카메라모듈에 대해 촬영 시 뷰파인더에서의 차트의 위치에 대한 오차가 발생하게 된다. 이러한 수작업에서 발생하는 오차를 보정하기 위해 카메라의 위치를 조성하는 시스템을 제안한다. 카메라의 위치는 촬영된 이미지로부터 추정 할 수 있으며 카메라의 이동과 위치 추정을 반복적으로 적용하면서 최적의 위치를 찾게 되고, 각 패치의 위치를 추정하여 출력 값을 획득한다. 또한 특성화로 인해 발생하는 노이즈를 줄이기 위하여 카메라의 출력 신호의 밝기 커브를 부분적으로 감마 커브를 조정한다.

• 동력기계공학회지
• /
• 제10권2호
• /
• pp.83-88
• /
• 2006

Corrosion characterization of Fe-XAl-0.3Y(X=5, 10, 14 wt%) alloys in $0.1{\sim}1N$ sulphuric acid at room temperature was studied using potentiodynamic techniques. The morphology and components of corrosion products on surface of Fe-aluminide alloys were investigated using SEM/EDX, XRD. The potentiodynamic polarization curve of alloys exhibited typical active, passive, transpassive behaviour. Corrosion potential($E_{corr}$) and corrosion current density($I_{corr}$) values of Fe-XAl-0.3Y alloys followed linear rate law. $E_{corr}$ of 10Al alloy and 14Al alloy was ten times lower than 5Al alloy. Icorr of 14Al alloy was five times lower than 5Al alloy. The passive film on the surface of Fe-5Al-0.3Y alloy was formed iron oxide. Fe-10Al-0.3Y and Fe-14Al-0.3Y alloys passive films were aluminium oxide. especially, Fe-14Al-0.3Y alloy showed good corrosion resistance in $0.1{\sim}1N$ sulphuric acid. This is attributed to the forming of protective $Al_2O_3$ oxide on the surface of Fe-14Al-0.3Y alloy.

• 대한수학회보
• /
• 제52권3호
• /
• pp.925-933
• /
• 2015

It is well-known that the area of parabolic region between a parabola and any chord $P_1P_2$ on the parabola is four thirds of the area of triangle ${\Delta}P_1P_2P$. Here we denote by P the point on the parabola where the tangent is parallel to the chord $P_1P_2$. In the previous works, the first and third authors of the present paper proved that this property is a characteristic one of parabolas. In this paper, with respect to triangles ${\Delta}P_1P_2PQ$ where Q is the intersection point of two tangents to X at $P_1$ and $P_2$ we establish some characterization theorems for parabolas.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.249-253
• /
• 1994

In machine tools, frictional force exists between the table and the bed, and in ballscrews. In this paper, feed motor current is used to measure the motor torque and frictional force. A hall sensor is used to measure the feed motor current. Some frictional pheonomina in feed drice systems, such as, the relationship between feedrate and frictional force, lubrication conditions and frictional force, and feed direction and frictional force, are obtained. Generally, the friction behavior is in good agreement with Stribeck's curve. However, the data shows significant scatter when feedrate is high.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.690-692
• /
• 2014

To identify characterization of a simple extension chamber that have the two internal partition, produce the curve to estimate the transmission loss without the computer analysis. For helpful for internal optimum design, identify the characteristic of internal partition on transmission loss. Made estimated transmission loss curve by function of relationship of internal partition and transmission. Check the similarity of predicted transmission loss and analysis transmission loss. Usage of the predicted transmission loss made by relationship of internal partition and transmission loss is good information to place the internal partition so as to maximize the transmission loss on target frequency at optimal design on muffler.

• 대한디지털의료영상학회논문지
• /
• 제13권1호
• /
• pp.7-11
• /
• 2011

As applications of radiation grow wider from use in the early detection of lesions and preventive diagnosis purposes to the treatment of diseases, the possibilities for patients and working professionals to be exposed to radiation are becoming greater than ever. This can not only directly bring about an increase in patient's individual radiation exposure, but also brings about an increase in the annual radiation dose of working professionals. Therefore, research and countermeasures to reduce radiation dosage are required. In this study, space dosimetry has been divided into two separate measuments with an understanding of the increasing number of angiography procedures: front perspective and side perspective. According to the results of the isodose curve, a way to minimize radiation exposure in working professionals has been suggested. This was made possible by workers through awareness of suitable working positions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.57-58
• /
• 2006

Chemical-mechanical planarization (CMP) of Cu has used currently in semiconductor process for multilevel metallization system. This process requires the application of a considerable down-pressure to the sample in the polishing, because porous low-k films used in the Cu-multilevel interconnects of 65nm technology node are often damaged by mechanical process. Also, it make possible to reduce scratches and contaminations of wafer. Electrochemical mechanical planarization (ECMP) is an emerging extension of CMP. In this study, the electrochemical mechanical polisher was manufactured. And the static and dynamic potentiodynamic curve of Cu were measured in KOH based electrolyte and then the suitable potential was found.

• 대한수학회보
• /
• 제60권6호
• /
• pp.1607-1620
• /
• 2023

In this paper, we mainly study the problem of the existence of homogeneous geodesics in sub-Finsler manifolds. Firstly, we obtain a characterization of a homogeneous curve to be a geodesic. Then we show that every compact connected homogeneous sub-Finsler manifold and Carnot group admits at least one homogeneous geodesic through each point. Finally, we study a special class of ℓ^p-type bi-invariant metrics on compact semi-simple Lie groups. We show that every homogeneous curve in such a metric space is a geodesic. Moreover, we prove that the Alexandrov curvature of the metric space is neither non-positive nor non-negative.