• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.518-524
• /
• 2005

This paper presents an analytical method for the reliability evaluation of distribution system, including the distributed generations. Unlike the large sized generations of transmission system, the distributed generations have complexities in analyzing and determining the operation. In the process of evaluate reliability, it can be shown that the analytical method is simpler than the Monte-Carlo simulation and the method using Load Duration Curve model is more accurate than that using peak load model. The modeling of distributed generation to analysis distribution system reliability using LDC is proposed in this Paper, and is compared with the MCS method as a result of case studies.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.532-537
• /
• 2005

The techniques of internally generating waves on a curve in a rectangular grid system are developed using the line source method. Numerical experiments are conducted using the extended mild-slope equations of Suh et al. (1997). For five different types of wave generation layout, numerical experiments are conducted in the cases of the propagation of waves on a flat bottom, and the refraction and shoaling of waves on a plane slope. The fifth type of wave generation, which consists of two parallel lines connected to a semicircle, shows the best solutions especially when the grid size is small enough.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.713-718
• /
• 1994

Voronoi diagrams for closed shapes have many practical applications, ranging from numerical control machining to mesh generation. Shape offset based on Voronoi diagram avoids the topological problems encountered in traditional offsetting algorithms. In this paper, we propose a procedure for generating a Voronoi diagram and an exact offset for planar curve. A planer curve can be defined by free-form curve segements. The procedure consists of three steps : 1) segmentation by minimum curvature, 2) construction of Voronoi diagram, and 2) generation of the exact offset.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2472-2474
• /
• 2002

This paper describe a trajectory generation method for a two-wheeled mobile robot using cubic Bezier curve. It is proposed that the method to determine the location of control points which mainly affect the shape of curve, and constrains for two-wheeled mobile are examined. Simulation results show its traceability of the trajectory of mobile robot.

• 한국태양에너지학회 논문집
• /
• 제39권6호
• /
• pp.113-125
• /
• 2019

With the opening of the small power brokerage business market in December 2018, the small power trading market has started in Korea. Operators must submit the day-ahead estimates of power output and receive incentives based on its accuracy. Therefore, the accuracy of power generation forecasts is directly affects profits of the operators. The forecasting process for power generation can be divided into two procedure. The first is to forecast solar irradiation and the second is to transform forecasted solar irradiation into power generation. There are two methods for transformation. One is to simulate with physical model, and another is to use regression model. In this study, we found the best-fit regression model by analyzing hourly data of PV output and solar irradiation data during three years for 242 PV plants in Korea. The best model was not a linear model, but a sigmoidal model and specifically a Gompertz model. The combined linear regression and Gompertz curve was proposed because a the curve has non-zero y-intercept. As the result, R² and RMSE between observed data and the curve was significantly reduced.

• 한국전산구조공학회논문집
• /
• 제16권2호
• /
• pp.153-163
• /
• 2003

원자로 용기의 온도-압력 한계곡선을 위하여 국내공동비교연구를 수행하였다. 국내 원전의 데이터를 이용하여 국내 각 기관에서 온도-압력 한계곡선 작성에 사용하고 있는 방법 및 기법을 비교하기 위하여 round robin 해석을 제안하였고 주어진 문제에 대하여 각 기관이 문제를 해석한 후 결과를 제출하여 이들을 분석함으로써 온도-압력 한계곡선 작성에 대한 표준 해석 자료를 만들어 추후 평가에 이용할 수 있도록 하였다.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.96-101
• /
• 1999

This study suggests an algorithm for tooth profile generation of free from curve involute gear, a special gear of which the pitch line is a free curve instead of a circular one. For the first, a methodology for calculation of the tooth curve is developed and formulated Then the formulated algorithm, is programmed for manufacturing and verified by computer graphics. Next the calculated results as changed in to NC codes to apply to wire electric discharge machine(WEDM). Finally, the machined gear is examined in engagement with a standard involute gear.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.106-109
• /
• 1992

This paper Introduces the concept of the generation cost of generating utilities and its calculation methods. Also, the economic evaluation method using generation cost which is called as a screening curve method will be presented along with the benefits and disadvantages of this concept. Next, the least-cost electric utility planning techniques which is used very widely in many countries will be Introduced In comparison with screening curve method. In this aspects, the optimal dynamic mix can be determined as a result. By comparing these two concepts, we will get the concrete concept why the economic evaluation method using generation cost can not be used for the future generation expansion planning.

• 한국지능시스템학회논문지
• /
• 제8권5호
• /
• pp.45-50
• /
• 1998

본 연구에서는 입출력 데이터로부터 비선형 다변수 모델을 자동 인식할 수 있는 적응형 Spline모델링(ASMOD : Adaptive Spline Modeling of Observation Data)과 혼합 곡선 근사법(Hybrid curve approximation)을 이용한 3차원 자유 형상 설계방법을 제안하고, 초기 선형 설계 단계에서 횡단면적 곡선(SAC : Sectional Area Curve) 생성 예를 통해 그 응용 가능성을 검토하였다. 즉 실적선의 SAC를 Bspline 근사법(Fitting methdo)과 유전자 알고리즘(Genetic Algorithm)에 의해 정의하여, 조정점(Control points)에 대한 데이터베이스를 구축한다. 구축된 데이터베이스-주요치수와 이들 조정점관의 관계-를 학습 데이터로 하여 ASMOD를 학습시킨후 , SAC결정을 위한 ASMOD 모델링을 구축한다. 다른 선형 특성 곡선들-design waterline curve, bottom tangent line, center profile line-에 대해서도 동일하게 적용하여 ASMOD를 모델링할 수 있으며, 이들 선형 특성 곡선들을 결합하여 초기 선형을 생성한다.

• 한국정보처리학회논문지
• /
• 제1권2호
• /
• pp.237-243
• /
• 1994

곡선의 신속한 컴퓨터 그래픽의 고속 처리를 가능하게 하는 중요한 기법 중의 하나이다. 이것은 현재 하드웨어나 소프트웨어를 통하여 상당한 효과를 거두고 있으 나 급속한 그래픽의 발전은 보다 빠른 곡선 생성 방법을 요구한다. 본 논문은 전향 차분을 이용하므로써 곡선 상의 점의 좌표를 곱셈을 배제하고 덧셈만으로 계산하여 보다 빨리 곡선을 그릴 수 있는 한 알고리즘(CDAUD라 부름)을 제시한다. CDAUD는 곡선 이 부드럽고 완전하게 연결된 상태로 그려지도록 하는 방안을 포함하고 있다. CDAUD 의 시간 복잡도(time complexity)는 그리는 곡선에 따라 기존의 방법보다 우수한 경 우도 있음을 실험을 통하여 확인할 수 있었다.