• 소성∙가공
• /
• 제17권7호
• /
• pp.491-495
• /
• 2008

Incremental forming path to manufacture a thick concave steel plate using the line array roll set is designed. To find the optimum forming path, the forming processes are simulated by the finite element method. A general-purpose commercial software, MSC MARC is used. A modeling with 8-node hexahedral elastic-plastic solid is performed to predict accurate springback and the analysis process was composed of 18 passes. The proposed forming paths are verified through experiments carried out in the prototype line array roll set. It is found that the process can be successfully applied to the fabrication of the dual curvature ship hull plate.

• 정보과학회지
• /
• 제1권1호
• /
• pp.72-74
• /
• 1983

Traditionally, polynomials have been used to approximte functions with prescribed values at a number of points(called the knots) on a given interal on the real line. The method of splines recently developed is more flexible. It approximates a function in a piece-wise fashion, by means of a different polynomial in each subinterval. The cubic spline gas ets origins in beam theory. It possessed continuous first and second deriatives at the knots and is characterised by a minimum curvature property which es rdlated to the physical feature of minimum potential energy of the supported beam. Translated into mathematical terms, this means that between successive knots the approximation yields a third-order polynomial sith its first derivatives continuous at the knots. The minimum curvature property holds good for each subinterval as well as for the whole region of approximation This means that the integral of the square of the second derivative over the entire interval, and also over each subinterval, es to be minimized. Thus, the task of determining the spline lffers itself as a textbook problem in discrete computer programming, since the integral of ghe square of the second derivative can be obviously recognized as the criterion function whicg gas to be minimized. Starting with the initial value of the function and assuming an initial solpe of the curve, the minimum norm property of the curvature makes sequential decision of the slope at successive knots (points) feasible. It is the aim of this paper to derive the cubic spline by the methods of computer programming and show that the results which is computed the all the alues in each subinterval of the spline approximations.

• 한국안광학회지
• /
• 제17권2호
• /
• pp.127-133
• /
• 2012

목적: 각막곡률계를 이용하여 비접촉식으로 안경렌즈의 곡률반경을 측정할 수 있는 방법에 관하여 조사하고자 한다. 방법: 각막곡률계의 전면부에 -9.50 D ~ -11.50 D의 시력검사용 시험렌즈를 부착한 후 안경렌즈를 각막곡률계의 전면부에서 약 25 cm 가량 떨어진 곳에 설치한다. 안경렌즈의 위치를 조금씩 변경시키며 선명한 마이어상을 관찰하여 곡률반경을 측정한 후, 구면계를 이용하여 곡률반경의 보정공식을 만든다. 결과: 전면부에 시험렌즈를 부착한 각막곡률계를 이용하여 곡률반경 측정이 성공적으로 수행되었다. 측정한 곡률반경은 구면계 데이터를 이용하여 보정값으로 변환 되었으며, 보정값을 만드는 직선의 방정식 5가지를 얻었다. 임의의 여러 가지 렌즈들을 전면부에 시험렌즈가 부착된 각막곡률계로 측정한 후 직선의 방정식을 이용하여 계산한 결과 3.5% 미만의 오차로 측정이 가능함을 알았다. 결론: 전면부에 시험렌즈를 부착한 각막곡률계를 이용하여 비접촉식으로 안경렌즈의 곡률반경을 측정하는 것이 가능하며, 그 정확도는 렌즈메져보다 오히려 높은 것으로 나타났다.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.407-411
• /
• 2011

The technology of line heating has evolved in various methods. Among them, fossil fuels like ethylene gas and LPG(Liquid Petroleum Gas) are widely used due to their simple utility. In the meantime, the technology implementing high frequency for line heating has also been developed continually, but its manufacturing technology or application includes lots of problems by now. One of the main characteristics of line heating using conventional technolob'Y is the quenching effect followed by heating process. On the other hand, hydrox gas which is mixed by hydrogen and oxygen is a prominent candidate for an application without above shortcomings. Especially, it is found that line heating using hydrox gas is tremendously effective taking low cost as well as low noise. In this paper, a small cell with high efficiency which can minimize installing space is developed to deal with the problem installing in narrow place. Experiments to prove the validation, efficiency and effectiveness is carried out by characterizing in the line heating of steel. It is found that the energy saving of using hydrox gas for line heating is significant and that the deviation performance is reduced by 78~89%. Furthermore, the noise is also reduced as amount of 18.3% though the heating time is not too different.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.67-73
• /
• 2010

A simplified finite element analysis has been used to predict the weld-induced deformation to bead-on-plate welding of steel plates having curvatures in the welding direction. In this study, the equivalent loading method based on inherent strain was used to investigate the effect of longitudinal curvature on the weld-induced deformation of curved plates. Equivalent loads were derived from the inherent strain distribution around the weld line, and the loads were used for linear finite element analyses. These kinds of numerical simulations can, of course, be performed by using the rigorous thermalelastic-plastic analysis method. This approach is not, however, practical for use in weld-induced deformation analysis of large and complex structures, such as ship structures, in view of computing time and cost. The present equivalent load approach has been applied to several plate models having curvatures in the welding direction, and the results are compared with those obtained by thermal-elastic-plastic analysis and also with those obtained by the other simplified method found in reference. As far as the present results are concerned, the weld-induced deformation of curved plates can be accurately predicted by the method presented in this paper.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.1-15
• /
• 2017

Installation of sensors networks for continuous in-service monitoring of structures and their efficiency conditions is a current research trend of paramount interest. On-line monitoring systems could be strategically useful for road infrastructures, which are expected to perform efficiently and be self-diagnostic, also in emergency scenarios. This work researches damage detection in composite concrete-steel structures that are typical for highway overpasses and bridges. The techniques herein proposed assume that typical damage in the deck occurs in form of delamination and cracking, and that it affects the peak power spectral density of dynamic curvature. The investigation is performed by combining results of measurements collected by long-gauge fiber optic strain sensors installed on monitored structure and a statistic approach. A finite element model has been also prepared and validated for deepening peculiar aspects of the investigation and the availability of the method. The proposed method for real time applications is able to detect a documented unusual behavior (e.g., damage or deterioration) through long-gauge fiber optic strain sensors measurements and a probabilistic study of the dynamic curvature power spectral density.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.50-57
• /
• 2009

본 논문은 3차원 다각형 모델에서 특징 선을 추출하기 위한 방법에 대해 제안한다. 이산 곡면으로 이루어진 다각형 모델에서 특징 선을 추출하기 위하여 기존 방법에서는 전역적인 음함수 곡면 맞춤 기법(Implicit Surface Fitting)을 이용하여 모델의 꼭지점에서 곡률과 곡률 미분 값을 측정하였다. 이러한 방법은 다각형 모델의 꼭지점에서 음함수 곡면으로 정확하게 투영할 수 있도록 사용자의 정의 파라미타를 찾아야 하며, 특징 추출을 위한 많은 계산 시간을 요구한다. 그러나 제안 방법은 지역적 음함수 곡면 맞춤 기법을 이용하여 모델의 꼭지점에 근사된 곡면을 통해 미분 정보를 측정한다. 측정된 미분 정보를 통해 쉽게 각각의 모서리에서 제로-클로싱을 통해 특징 점을 추출하고, 곡률 방향을 따라 추출된 점들을 연결하여 특징 선을 생성한다. 여러 가지 다각형 모델에서 실험을 하였고 기존 방법보다 빠르며 높은 품질의 특징 선을 추출한다.

• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2002년도 추계학술대회
• /
• pp.133-140
• /
• 2002

본 논문에서는 다양한 건물 지붕의 검출에 사용될 수 있는 선소의 그룹화 기법을 제안한다. 먼저 에지 보존 필터를 사용하여 영상에 포함된 잡음을 제거한 후에 watershed 기법을 이용하여 에지의 위치를 보존하고 영상 분할을 수행한다. 분할된 영역의 경계선에 위치한 화소들의 곡률을 계산하여 control point를 검출하고 control point 사이의 선소를 추출한다. 추출된 선소들의 방향과 길이를 고려하여 선소의 연결을 수행하고 최종적으로 화소의 그레디언트 크기를 이용하여 선소의 위치를 조정한다. 항공 영상에 제안한 방법을 적용하여 건물 지붕을 정확하게 검출할 수 있음을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.484-487
• /
• 2004

Symmetric directional couplers are widely used in interferometers, switches, and various signal processing devices. Recently, several optical couplers using multimode fibers were reported, but these suffer from inefficient coupling of light into a branching fiber and/or low directivity. This paper presents the measurement and analysis of loss in the connection of optical fibers via the optical directional couplers. The functionality of the device is based on the principle that is symmetrical, the power in excited mode can be unambiguously directed into one of the output channel by varying and of its parameters. In this experiment, we measure the power of loss in the optical directional coupler at various radius of curvature. Before the measurement of loss in x-coupler, we polish the contact of the fiber surface in order that light can penetrate through another port. The results show that, when the radius of curvature is increased, the loss power is decreased and also approaches of the straight line case.

• 대한수학회지
• /
• 제43권6호
• /
• pp.1339-1355
• /
• 2006

This paper develops in detail the differential geometry of ruled surfaces from two perspectives, and presents the underlying relations which unite them. Both scalar and dual curvature functions which define the shape of a ruled surface are derived. Explicit formulas are presented for the computation of these functions in both formulations of the differential geometry of ruled surfaces. Also presented is a detailed analysis of the ruled surface which characterizes the shape of a general ruled surface in the same way that osculating circle characterizes locally the shape of a non-null Lorentzian curve.