• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.69-76
• /
• 2010

After feeding mixed samples, VS ranged from 60 to 80% of total costs in 15 days. EC ranged from1.21 to 2.45, 1.25 to 2.1 and 1.2 to 1.88mS/cm when worms were fed with a mixture of by-products of tidal current and sewage sludge, a mixture of by-products of algae producy, and food wastes and a mixture of by-products of algae producy, sewage sludge and food wastes. That means the kinds of mixture don't have any negative impacts on worms survival. With the feed with a mixture of by-products of algae producy and food wastes and a mixture of by-products of algae producy, sewage sludge and food wastes, pH shows stable 5.4 to 6.7, and 6.2 to 7.4 where is suitable for worms. But a mixture of by-products of algae producy and sewage sludge is out of proper scope for raising worms, in other words, extra care will be necessary. In case of Eh, a mixture of by-products of algae producy and sewage sludge make eh negative (-) in early stage so also when feeding worms, also extra care will be needed. NaCl ranged from 0.32 to 0.82% or form 0.23 to 0.61% when a mixture of by-products of algae producy and food wastes and a mixture of by-products of algae producy, sewage sludge and food wastes were fed. So taking care of salts will be essential whenever feeding.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2010

Recently, the effective use of closed waste landfill nearby urban areas has been demanded, because of the lack of the usable land. However, the reuse of closed landfill is needed an adequate stabilization of liner system. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetics liners in there. Liner system of waste landfills is an important facility which prevents leachate outgoing from the landfills and also groundwater infiltrating from surroundings into the landfills. During the waste disposal stage, differential settlement and tensile stress of the geosynthetic materials could occur due to impact load of trucks and dozers, waste loads and weak foundation soils. In this study, the tensile strength and tracer test were performed to evaluate the stability of geomembrane liner systems. Based on the tensile strength test result of in-situ geomembrane sample, the yield tensile strength maintain the suitable strength by specification and current law. However, according to the tracer test, the damage of geomembrane liner was detected on sanitary landfill section.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.128-138
• /
• 2014

Development of infrastructure component libraries is a critical requirement for the accelerated adoption of BIM in the civil engineering sector. Libraries reduce the time for BIM model creation, allows accurate quantity take offs, and shared use of standard models in a project. However, such libraries are currently in very short supply in the domestic infrastructure domain. This research introduces library components for retaining walls and box culverts generated from 2D standard drawings made publicly available by MOLIT. Commercial BIM software was used to create the concrete geometry and rebar, and dimensional/volumetric parameters were defined to maximize the reuse and generality of the libraries. Use of the these libraries in a project context demonstrates that they allow accurate and quick quantity take offs, and easier management of geometric information through the use of a single library as to numerous 2D drawings. It also demonstrates the easy modification of the geometries of the components if and when they need to changed. However, the application also showed that some of the rebar components (stirrups and length wise rebars) do not get properly updated when concrete geometries are changed, demonstrating the limits of current software applications. The research provides evidence of the many advantages of using BIM libraries in the civil engineering, thus providing the incentive for further development of standard libraries and promoting the use of BIM in infrastructure projects.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.25-40
• /
• 2010

Service-Oriented Architecture (SOA) is a development paradigm for reusing services as an independent reuse unit. A service delivers a cohesive functionality through its external interface. Since services have unique characteristics which are not typically presented in conventional development approaches, there is a demand for effective approaches to developing services. Most of the current SOA methodologies presenta process where services are designed and developed from the requirements rather than reusing existing assets, which demands high cost and effort. Hence, a desirable approach is to be able to develop services by migrating from their existing legacy systems such as object-oriented system. A difficulty in this migration is that objects in object-oriented systems reveal characteristics which differ considerably from those of services. That is, objects are designed without considering commonalities among several consumers. In this paper, we first define mapping relationships between key artifacts in object-oriented system and those in SOA services. By these relationships and considering commonalities among several applications in a domain, we propose three systematic methods to migrate from object-oriented system to SOA services. Each method consists of a list of input and output artifacts and detailed guidelines which are performed in order. Through these methods, service developers can easily develop services with less effort.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.17-26
• /
• 1998

A study on the recovery of silver and nitric acid in the liquid waste resulted from the mediated electrochemical oxidation(MEO) process was conducted. The removal of silver in the concentrated nitric acid solutions was carried out by the electrodeposition. The removal efficiency more than 98% could be obtained in nitric acid concentrations less than 3 M with the current efficiency of nearly 100%. The experimonts on the evaporation for the recovery of nitric acid were performed as well. At the evaporation factor of 25., the degree of nitric acid recovery in 3.5 M nitric acid solution containing 0.5 to 1.0 mol% NaNO, was 80~90% resulting in 2.8~3.1 M nitric acid. The design factors and operating conditions of the distillation tower were analyzed by using MEH model derived by Maphtali-Sandholm with the throughput of 4 kg/hr for the enrichment of dilute nitric acid solution recovered by evaporation to reuse in the MEO process. The distillation column composed of eleven theoretical stages having the overall tray efficiency of 70% are needed to obtain 1.03 kg/h of 12M nitric acid and 2.97 kg/h of water with feed being introduced to the column at tray 6 from the bottom at the reflux ratio of 0.25, the reboiler with the heat load of 2.7 kW, and the condenser with the cooling load of 0.5 kW.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.235-246
• /
• 2008

Service-Oriented Architecture (SOA) is emerging as an effective approach for developing applications by dynamically discovering and composing reusable services. Generally, the benefits of SOA are known as low-development cost, high agility, high scalability, business level reuse, etc. However, a representative problem for widely applying SOA is the performance problem. This is caused by the nature of SOA such as service deployment and execution in distributed environment, heterogeneity of service platforms, use of a standard message format, etc. Therefore, performance problem has to be overcome to effectively apply SOA, and service performance has to be measured precisely to analyze where and why the problem has occurred. Prerequisite for this is a definition of a quality model to effectively measure service performance. However, current works on service performance lacks in defining a practical and precise quality model for measuring performance which adequately addresses the execution environment and features of SOA. Hence, in this paper, we define a quality model which includes a set of practical metrics for measuring service performance and an effective technique to measure the value of the proposed metrics. In addition, we apply the metrics for Hotel Reservation Service System (HRSS) to show the practicability and usefulness of the proposed metrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.311-368
• /
• 2009

In order to survive the on-going natural resource war, Korea needs various efforts such as enhancing self-exploitation ratio, increasing the supply of new-reuse energy, strengthening cooperation with resource rich countries. Central Asian countries are geometrically far away from Korea. However, Korea should try to develop political, economic and ethnic relationship with those countries into much higher dimension to secure various natural resources. Major countries including U.S., EU. Japan and China are approaching Central Asian countries with long term perspective. Improving country-image through enlargement of ODA is the first concern of those countries. Korea should try to follow their practices. Government should try to improve Korea's image in the first place and lead economic cooperation with very detailed supportive measures to induce Korean firms' investment into the Central Asian countries. In the due process, a lot of information about those countries' political climate, social situation, ethnical composition, major religions, educational system, current state and structure of economies and industries, etc should be made available to Korean firms.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.5-12
• /
• 2019

The study is carried out to survey the proper management and to propose an eco - friendly separation system through efficient screening and resource recovery of excavated materials containing waste from various excavating fields such as reconstruction of landfill sites for reuse, reclamation of unsanitary landfill and residential land development of waste dumping sites. The current status and screening process and analytical characteristics of the excavated materials containing waste were reviewed. Through the analysis of the samples such as separated combustibles, recyclable soils and residues collected from the on-site visits we were able to understand the characteristics of separated materials and excavated materials containing waste such as calorific value, elementary composition, TOC, foreign material content and LOI. It has been found that elimination of the moisture of excavations, removal of attached soil from the surfaces of the excavated combustibles and the quantitative supply method of the input devices are the main operating factors as essential factors for the optimal separation of excavated materials containing waste. For efficient management and recycling of excavated materials containing, it is necessary to set criteria of ash content in separated combustibles and criteria organic matter content in separated soils.

• The Korean Journal of Archival Studies
• /
• no.17
• /
• pp.115-156
• /
• 2008

Archival objects produced in relation to the activities of public institutions hold the inexpressible symbolism, historical value, and esthetical value as well in that the values of display and reuse of archives materials in the future are high as figures. The revised law of Archives Act in 2007 has provided a foundation for managing the archival objects in every public organization, by also including archival objects into the category of archives produced and registered in relation to their works. Although it could be seen as a reforming will to aim at the differential approach from the past to recognize the archival objects as records and make the managing will documented, it is still in an unprepared state to define the concepts on archival objects and to have methods to systematically manage and preserve them. Thus this paper has researched on the type classification of archival objects and their evaluation, as way of developing the methods for the management system for archival objects. On the premise that it should be preceded by clear definitions of concepts and distinctive understanding of their types first in order to build up the management system for archival objects, definition and type classification of the archival object have been attempted, based on the actual research materials and the current relevant laws. In addition, this study has analyzed the characteristics of selecting archival objects in order to search for which one they should obtain and manage among archival objects produced and reused in relation to the works of public institutions. On the basis of this, the plans for the national selection system and provision of selecting criteria for the subjects of permanent preservation have been suggested in this study.