• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.66-75
• /
• 2010

The authors argues that the current road updating system based on traditional aerial photograph or multi-spectral satellite image appears to be non-user friendly due to lack of the frequent cartographic representation for the new construction sites. Google Earth are currently being emerged as one of important places to extract road features since the RGB satellite image with high multi-temporal resolution can be accessed freely over large areas. This paper is primarily intended to evaluate optimal threshold of RGB pixel values to extract road features from Google Earth. An empirical study for five experimental sites was conducted to confirm how a RGB picture provided Google Earth can be used to extact the road feature. The results indicate that optimal threshold of RGB pixel values to extract road features was identified as 126, 125, 127 for manual operation which corresponds to 25%, 30%, 19%. Also, it was found that display scale difference of Google Earth was not very influential in tracking required RGB pixel value. As a result the 61cm resolution of Quickbird RGB data has shown the potential to realistically identified the major type of road feature by large scale spatial precision while the typical algorithm revealed successfully the area-wide optimal threshold of RGB pixel for road appeared in the study area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.113-122
• /
• 2016

In this study, the dispersion process of pollutant substances in a port under wave and current environments was evaluated by a hydraulic experiment. Once the contaminants washed ashore into the port of Wolseong nuclear power plant, transport processes of pollutants were investigated by tracking the tracer according to the variations of experimental condition through a hydraulic experiment. Several hydraulic experiments were performed to analyze the pollutant discharge rate of the surface coming from the different coastal environments. From the hydraulic experiment results, the tracer concentration decreased exponentially. These results suggested that, after the tracer was transported to the open sea, a different gradient was shown under different conditions. For the case of a diluted condition, the half-life of flow rate was 2.70, 10.40, and 26.39 days for 30, 20 and 10 rpm in the left-side, respectively. The decrease of the tracer concentration under conditions of 30 rpm was much faster than that under conditions of 10 rpm. For the wave condition, the half-life of flow rate was 4.59 and 15.35 days for the right and left side of the port in a hydraulic scale prototype, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1708-1721
• /
• 2011

Recent outbreak of cattle diseases such as foot-and-mouth disease(FMD) requires constant monitoring of burial sites of mass cull of cattles. However, current monitoring system takes environmental samples from burial sites with period of between one and two weeks, which makes it impossible for non-stop management of hazardous bio-waste. Therefore, in this study, we suggest an improved real-time environmental monitoring system for such bio-hazardous sites based on wireless sensor networks, which makes constant surveillance of the FMD burial sites possible. The system consists mainly several wireless environmental monitoring sensors(i.e dust, Co2, VOC, NH3, H2S, temperature, humidity) nodes and GPS location tracking nodes. Through analysis of the relayed of the environmental monitoring data via gateway, the system makes it possible for constant monitoring and quick response for emergency situation of the burial sites. In order to test the effectiveness of the system, we have installed a set of sensor to gas outlets of the burial sites, then collected and analyzed measured bio-sensing data. We have conducted simulated emergency test runs and was able to detect and monitor the foul smell constantly. With our study, we confirm that the preventive measures and quick response of bio environmental accident are possible with the help of a real-time environmental monitoring system.

• Korean Security Journal
• /
• no.53
• /
• pp.109-133
• /
• 2017

The purpose of this study is to provide a general trends in recent terrorism in North America and Europe over the last five years. In particular the terrorism which occurred after 2012 shows the transition in trends as terrorists attacks civilians and public places(soft target) rather than targeting national facilities or specific people. For instance, the Parris terror attack and Barcelona vehicle attack shows this changes clearly. The terrorists appeared to attack ordinary people in urban places with high population density. Although the trends are changing, there are still few studies focusing on the current situation, and most of the previous studies have focused on changing in strategies and counter-terrorism in each country after the 9.11 terror. Meanwhile, studies examining the trends of terrorism have been limited to analyzing few cases or using relatively monolithic data of Global Terrorism Data(GTD). While the types of terrorism that occur recent years including 'new terrorism' in many respects, it seems to be difficult to classify with GTD data and/or case studies. Therefore, it is necessary to construct new data that perhaps grasp the recent trend of terrorism from different perspectives. In this point of view, this Based on this, this study collects terrorism data from North America and Europe for the past five years, by using the National Intelligence Service's annual report on terrorism as a sampling framework and analyse the trends and changes. The result shows similarities in the methods of attack, and the type of weapon they used. As vehicle attacks has been raised in few years, damage area has been widen and casualties also have been increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.162-170
• /
• 2017

This study analyzed the current situation of medium and small-sized hospital nursing staff and related policies, and identified the factors that affect staffing level to provide evidence for planning and adopting policy. By analyzing the statistical data published by public institutions such as the Ministry of Health and Welfare and Health Insurance Review and Assessment Service, the result was viewed based on the understanding of various internal and external health care environments. The number of active nurses was less than 50% of the number of licensed nurses and has decreased every year. This means that the cost-effectiveness of increases in nursing college enrollment should be reconsidered. Inpatient nursing fees by staffing grades has caused nurses to move from medium and small-sized hospitals, where there is a severe lack of staff, to more advanced general hospitals. As a result, the lack of nursing staff in medium and small-sized hospitals has worsened. In conclusion, reexamination is needed to improve effectiveness of inpatient nursing fees by staffing grades as a policy to secure the workforce of medium and small-sized hospitals. Furthermore, the tracking management system of licensed nurses must be able to solve the imbalance between demand and supply of nursing staff.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.581-594
• /
• 2003

Recently, a location management is being more important in mobile communication systems due to an explosive increase of mobile users. Current systems have used a concept of location area. Based on this concept, a mobile user performs a location update whenever it moves into a new location area. However, this scheme can not avoid unnecessary location updates when a mobile user moves around with high movement rate as compared to call arrival rate. That results in tremendous location management cost. To overcome this drawback, our proposal divides service areas into two sets: One is a set of areas that mobile users move with high speed and another is a set of areas that they move with low speed. After establishing these two sets, this paper employs different location tracking schemes for each sets. Generally, most mobile users with high speed have a low CMR and a regular direction until they arrive at their destination. Using such the moving behavior, systems can predict a mobile user's next location area in advance. When the mobile user moves into the predicted location, our proposal does not perform a location update. Thus, it can reduce overall location management cost. The Markov model is used to analyze the performance of our proposal. Using the model, this paper compares our proposal with IS-41 and TLA. The analytic results show that as CMR grows lower, an overall cost of our proposal becomes less, particularly if a mobile user frequently moves into the specific location are predicted by mobile systems. Also, our proposal has a better performance than other two schemes when the communication cost between HLR and VLR is high.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.396-402
• /
• 2010

The tracking of current location of residents is an essential requirement for context-aware service of smart houses. This paper presents a wireless sensor network system which could detect location transition such as entrance and exit to a room and also identify the user who passed the room, without duty of wearing any sort of tag. We designed new sensor node to solve the problem of short operation lifetime of previous work[1] which has two pyroelectric infrared (PIR) sensors and an ultrasonic sensor, as well as a 2.4 GHz radio frequency wireless transceiver. The proposed user identification method is to discriminate a person based on his/her height by using an ultrasonic sensor. The detection idea of entering/exiting behavior is based on order of triggering of two PIR sensors. The topology of the developed wireless sensor network system is simple star structure in which each sensor node is connected to one sink node directly. We evaluated the proposed sensing system with a set of experiments for three subjects in a model house. The experimental result shows that the averaged recognition rate of user identification is 81.3% for three persons. and perfect entering/exiting behavior detection performance.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.83-91
• /
• 2015

Purpose - Despite the structural irrationality of multi-level transportation and the oil price rise, the domestic freight transportation market continues to grow, mirroring the rise in e-commerce and resultant increase in courier services and freight volumes. Several studies on courier services have been conducted. However, few studies or statistics have been published regarding regular freight services although they have played a role in the freight service market. The present study identifies the characteristics of regular freight service users to seek competitiveness enhancement measures specific to regular freight services. Research design, data, and methodology - IPA is a comparative analysis of the relative importance of and satisfaction with each attribute simultaneously. This study used IPA because it facilitates the process of analyzing importance and performance, deriving implications and a visual understanding of results. To enhance the competitiveness of regular freight services, this study surveyed its current users regarding the importance of the regular freight service factors. A total of 200 copies of a questionnaire were circulated and 190 copies were returned. In addition to demographics, respondents answered questions about the importance of and satisfaction with services on a 5-point Likert scale. Excluding 3 inappropriate copies, 187 out of 190 copies were analyzed. PASW Statistics 18 was used for statistical analysis. A total of 20 question items were selected for the service factors presented in the questionnaire based on the 1st pilot survey and previous studies. Results - According to the IPA performed to compare the importance of and satisfaction with service factors, both importance and satisfaction are high in the 1st quadrant, which involves the economic advantage of using regular freight services, quick arrival at destinations, weight freight handling, and less time constraints on freight receipt/dispatch. This area requires continuous management. Satisfaction is higher than importance in the 2nd quadrant, which involves the adequacy of freight, cost savings over ordinary courier services, notification on freight arrival, and freight tracking information. This area requires intensive investment and management. Satisfaction is lower than importance in the 3rd quadrant, involving the credit card payment system, courier delivery service, distance to freight handling sites, easy access to freight handling sites, and prompt problem solving. This area requires further intensive management. Both importance and satisfaction are low in the 4th quadrant, involving the availability of collection service, storage space at freight handling sites, kindness of collection/delivery staff, kindness of outlet staff, and easy delivery checks. This area is a set of variables should be excluded from priority control targets. Conclusions - Based on the IPA, service factors that need priority controls because of high importance and low satisfaction include the credit card payment system, delivery service, distance to freight handling sites, easy access to freight handling sites, and prompt problem solving. The findings need to be applied to future marketing strategies for regular freight services and for developing competitiveness enhancement programs.

• Journal of the Korean Society for Computer Game
• /
• v.31 no.4
• /
• pp.197-203
• /
• 2018

As people's interest in Virtual Reality has recently increased, peripherals have also made many progress. There is a lot of research being done from VR environment to VR configuration through scanning at room level with various interface devices that can interact with objects in the environment. According to current VR research Home VR uses multiple haptic interfaces to interact with objects configured in the VR environment, the method uses room scanning to some extent is beyond the spatial constraints and may use tracking equipment to interact with real objects. And advances in 3D printers have enabled the distribution of commercial 3D printers and home 3D printers, and made it easy for 3D printers to create models of their choice at home or at home. Considering the above two factors, We think it is necessary to study the difference between a model's object that people feel when interacting directly with an easy-to-create model in a VR environment. Therefore, in this paper, we are going to implement objects produced by 3D printers in VR space and study the differences between using real objects and other general interaction equipment through user testing with those that are actually implemented.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.26-45
• /
• 2013

Sudden increase exceeding 30million in the number of smart phone users, and rising interest in the technology of augmented reality, is now trying to combine it with AR technology in other areas very much. The field of cultural heritage, which has been constructed by the Internet and 3D technology, is not unusual and this field is now rapidly changing thanks to the AR technology which can make users experience cultural heritage with high reality. The Palaces in Seoul, however, use fragmentary tools of information - lack of heritage commentators, leaflet, etc, even though the number of visitors is gradually increasing. Therefore, three-dimensional and comprehensive cultural heritage information service is needed with the guidance in the mobile era. This study utilizes the AR technology for building the Deoksugung Tourist Information Service Application(App.) applying the markerless-based recognition technology which is a more advanced tool than the location-based AR technology. This new AR technology can switch perceived real images such as the tablet of the King in the Palace of in the real world, patterns and pedestals into virtual world, which can reproduce the damaged cultural assets as 3D. This also composes photos of the past with the current buildings, which can increase people's interest and absorption of the contents, and helps them understand and be aware of Korean traditional culture and cultural heritage effectively. In addition, convergence between IT new technology, Augmented Reality(AR) and humanities through storytelling based implementation of cultural heritage in smart phone is attempted to demonstrate that there is strength in which augmented reality technique exerts infinite creativity based on actual reality world.