• The Journal of Information Systems
• /
• v.10 no.1
• /
• pp.27-50
• /
• 2001

The purpose of this study was to examine some of the most important factors for the development of information systems with today's fast-paced, ever-changing, and exciting information system environment. Especially, it was focused to investigate current information technology related to develop information systems, to find some important problems during the development process, and to suggest solutions for the problems. Case research methodology was used because a natural setting was needed and a focus was on contemporary events for this study. Similarly, research phenomena was not supported by a strong theoretical base. The case was the development of an integrated information systems in a specific university. Multiple-case designs were desirable, but single-case study was used because of limitations of site selection. Multiple data collection methods were employed in this study such as documentation, interviews, and direct observation. Some major problems were found during the system development. First, the schedule to complete a project was delayed over six months. Second, the system did not ensure to align organizational goals and information systems goals based on BPR (Business Process Reengineering). Third, there was a difficulty in evaluating request for proposal (RPR) returns and choosing a vendor. Finally, information technology is changing too fast. So, it was very difficult to get the transparency of new technology The study has suggested a few solutions: top management support, matching If planning with business planning, complete project plan and control, user participation, and training Finally, joint application development (JAD) is strongly recommended, which is a workshop that unites management, IT specialists, and knowledge workers to define and specify the logical requirements and technical alternatives for a proposed system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup1
• /
• pp.91-96
• /
• 2016

Comprehensive bans on tobacco advertising and promotion were introduced through tobacco control legislation in Viet Nam, but it has been established that violations of the bans are very common. This study was conducted to explore the trend in violations of bans on tobacco advertising and promotion at points of sale in Viet Nam in the past six years and to explore any differences in the violation situations before and after the Law on Tobacco Control came into effect on 1st May 2013. Quantitative data were collected through observation of violations of the bans on tobacco advertising and promotion at points of sale in 10 provinces throughout Viet Nam in four survey rounds (2009, 2010, 2011, and 2015). Variation in violation prevalence over time was examined by chi-square test using a Bonferini method. Binary logistic regression was employed to identify the factors that may have influences on different types of violation. A level of significance of p<0.05 was used for all tests in this article. The most common form of violation was the display of more than one pack/one carton of a cigarette brand. Violation of bans on tobacco advertising increased while violations on promotion ban and on displaying tobacco decreased through time. Some factors associated with the tobacco advertising and promotion bans included surveyed years, types of points of sale, regions and areas where the points of sale were located. The enforcement of the bans did not improve even after the issuance and the enactment of the Law on Tobacco Control. This suggests that the monitoring and enforcement of bans on tobacco advertising and promotion at points of sale should be strengthened. Penalties should be strictly applied for violators as indicated in the current tobacco control legislation.

• Journal of Korean Public Health Nursing
• /
• v.34 no.2
• /
• pp.182-197
• /
• 2020

Purpose: This study undertook to qualitatively investigate the operation status, support requirements and improvement plans for establishing an appealing dementia rest area in Gyeongsankbuk-do. Methods: Data were collected from May 1 to June 20, 2019, using participation observation and in-depth interview of 8 health professionals, and were subjected to qualitative analysis. Results: Our analysis revealed 4 themes and encompassing 16sub-themes: 1) program operation status (hard to prepare and operate programs, difficulty adjusting the program level, various needs of program participants, lack of mutual understanding among program participants); 2) policy support needs (need for assistants staff and basic education, requirement of extensive training for the main operators, support program aid equipment, incentive payments and performance reflections); 3) project operation's improvement plan (improved the operation of doubles classes, improved of training materials for the main operators, improved program activities and workbooks, Increasing the number of dementia rest areas); 4) positive effects and changes (positive effects of specialized projects, changes in perceptions of dementia, strengthening community awareness through doubles classes, synergy effect on community health care post awareness) Conclusion: We believe the current study results can be applied as basic data for establishing a new model, and will positively impact the national dementia management project.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.673-676
• /
• 2015

Digital Pre-Distortion (DPD) is a linearization technique for nonlinear power amplifiers (PAs) by implementing inverse function of the PA at baseband digital stage. To obtain proper DPD parameters, a feedback path is required to convert the PA output to a baseband signal, and a memory is also needed to store the feedback signals. DPD parameters are usually found by an adaptive algorithm from the feedback samples. However, for the adaptive algorithm to converge to a reliable solution, long feedback samples are required, which increases convergence time and hardware complexity. In this paper, we propose a DPD technique that requires relatively short feedback samples. From the observation that the convergence time of the adaptive algorithm highly depends on the initial condition, this paper iteratively utilizes the feedback samples while keeping and using the converged DPD parameters at the former iteration as the initial condition at the current iteration. Computer simulation results show that the proposed method performs better than the conventional technique while the former requires much shorter feedback samples than the latter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2009

Tracking the Maximum Power Point(MPP) of a photovoltaic(PV) array is usually an essential part of a PV system. The problem considered by MPPT techniques is to find the voltage $V_{MPP}$ or current $I_{MPP}$ at which a PV array should operate to generate the maximum power output PMPP under a given temperature and irradiance. The MPPT control methods, such as the perturb and observe method and the incremental conductance method require microprocessor or DSP to determine if the duty cycle should be increased or not. This paper proposes a simple and fast analog MPPT method. The proposed control scheme will track the MPP very fast and its hardware implementation is so simple, compared with the conventional techniques. The new algorithm has successfully tracked the MPP, even in case of rapidly changing atmospheric conditions, and Has higher efficiency than ordinary algorithms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.960-964
• /
• 2004

[ $Ba_2NaNb_5O_{15}$ ](BNN) thin films have been prepared by the ion beam sputter deposition (IBSD) method on Pt coated Si substrate at temperature as low as $600^{\circ}C$ XRD, SEM were used to investigate the crystallization and microstructure of the films. It was found that the films were crack-free and uniform in microstructure. The electric properties of thin films were carried out by observation of D-E hysteresis loop, dielectric constant and leakage current. It was found the deposition rate strongly influenced the phase formation of the films, where the phase of $BaNb_2O_6$ was always formed when the deposition rate was high. However, the single phase (tungsten bronze structure ) BNN thin film was obtained with the deposition rate as low as $22{\AA}/min$. The remanent polarization Pr and dielectric constant are about 1-2 ${\mu}C/cm^2$ and $100\sim200$, respectively. It was also founded the electric properties of thin films were influenced by the deposition rate. The Pr and dielectric constant of films increased with the decrease of deposition rate. The effects of annealing temperature and annealing time to the crystallization behavior of films were studied. The crystallization of thin film started at about $600^{\circ}C$. The adequate crystallization was gotten at the temperature of $650^{\circ}C$ when the annealing time is 0.5 hour or at the temperature of $600^{\circ}C$ when the annealing time is long as 6 hours.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.243-250
• /
• 2019

With the popularization of online learning, mobile learning and blended learning model, augmented reality technology is increasingly widely applied in the field of education today. This article stresses the necessity of applying augmented reality to education by summarizing the current situation and advantages of augmented reality technology in education. Next, the author proposes a new education system-"AR+E education cloud platform system". Last, the author proposes several inspirations for the design of AR-based education software according to the observation and interview of the behaviors and preferences of the respondents.

• Journal of Korean Elementary Science Education
• /
• v.23 no.3
• /
• pp.192-198
• /
• 2004

The purpose of this study was to analysis the curriculum for educating and operating the classes of elementary science gifted in Incheon Metropolitan Office of Education. We developed the framework for curriculum content analysis based on the principles of curriculum development for gifted education. The developed framework was applied to the curricula of four classes of elementary science gifted in Incheon. And the needs of gifted students were surveyed in the classes of the elementary science gifted. The results of this study were as follows: 1. The current curriculums of two classes described the goal of the elementary gifted education, but the content and theme of the curricula of three classes were not related to the contents of the 7th national curriculum. 2. The teaching methods used in the science gifted class were mainly a lecture and an experimental activity. and there was little the process of individual instruction. 3. There was not mostly the products as the results of learning because of little performed by a project teaming, an announcement and an exhibition in gifted class. 4. Most of the students of the science gifted class were estimated by the paper tests and observation of the teacher in charge of the gifted class, not by the products and presentation etc. 5. They mostly preferred the theme of everyday life in addition to the textbook, and the instructional type of enrichment teaming and acceleration learning over the grade of themselves. 6. They mainly expected that the curriculum of the gifted class is operated during the semester.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.65.1-65.1
• /
• 2012

MIRIS (Multipurpose Infra-Red Imaging System) is the first Korean Infrared Space Telescope developed by KASI (Korea Astronomy and Space Science Institute), and is the main payload of STSAT-3 (Science and Technology Satellite-3). The FM (fight model) of MIRIS has been recently completed, and various performance tests have been made to measure system parameters such as readout noise, system gain, linearity, and dark current. Final thermal-vacumm test of the MIRIS and the vibration test of the electronics box have been performed. Band response tests showed good agreement with the initial design requirements. No significant dark difference was measured within the expected temperature variation range during observation in orbit. Using Pa-alpha band from a uniform source, the readout noise and system gain were measured by mean variance test. To obtain uniform flat image, flat fielding tests were made for each band, and the data will be compared to that obtained in orbit for calibration. The final version of MIRIS FM will be delivered in March, and it will be integrated into the satellite system for the AIT (Assembly Integration, Test) procedure. The launch of MIRIS is expected in November 2012.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.39.1-39.1
• /
• 2017

The standard hierarchical galaxy formation scenario in the popular LCDM cosmogony has been very successful in explaining the large-scale distribution of galaxies. However, one of the failures of the theory is that it predicts too many satellite galaxies associated with massive galaxies compared to observations, which is called the missing satellite galaxy problem. Isolated groups of galaxies hosted by passively evolving massive early-type galaxies are ideal laboratories for finding the missing physics in the current theory. We discover through a deep spectroscopic survey of galactic satellite systems that bright isolated early-type galaxies have almost no satellite galaxies fainter than the r-band absolute magnitude of about Mr=-14. The cutoff is at somewhat brighter magnitude of about Mr=-15 when only early-type satellites are used. Such a cutoff is not observed in the luminosity function of galaxies in the field. Physical properties of the observed satellites depend sensitively on the host-centric distance. All these are strong evidence that galactic satellites can become invisible due to astrophysics of satellite-host galaxy interaction. A recent state-of-the-art hydrodynamic simulation of galaxy formation does not reproduce such a cutoff in the satellite galaxy luminosity function. But the past history of the simulated satellites shows that many satellite galaxies near or somewhat fainter than the cutoff magnitude have recently become extinct through fatal encounters with the host or other satellite galaxies. Our observation indicates that the missing satellite galaxy problem could be mitigated if the astrophysics of galaxy interaction is more elaborated in the theory.