• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• Korean Journal of Artificial Intelligence
• /
• v.11 no.2
• /
• pp.39-44
• /
• 2023

The creativity of thesis is that the significance of cyber security challenges in blockchain. The variety of enterprises, including those in the medical market, are the targets of cyberattacks. Hospitals and clinics are only two examples of medical facilities that are easy targets for cybercriminals, along with IoT-based medical devices like pacemakers. Cyberattacks in the medical field not only put patients' lives in danger but also have the potential to expose private and sensitive information. Reviewing and looking at the present and historical flaws and vulnerabilities in the blockchain-based IoT and medical institutions' equipment is crucial as they are sensitive, relevant, and of a medical character. This study aims to investigate recent and current weaknesses in medical equipment, of blockchain-based IoT, and institutions. Medical security systems are becoming increasingly crucial in blockchain-based IoT medical devices and digital adoption more broadly. It is gaining importance as a standalone medical device. Currently the use of software in medical market is growing exponentially and many countries have already set guidelines for quality control. The achievements of the thesis are medical equipment of blockchain-based IoT no longer exist in a vacuum, thanks to technical improvements and the emergence of electronic health records (EHRs). Increased EHR use among providers, as well as the demand for integration and connection technologies to improve clinical workflow, patient care solutions, and overall hospital operations, will fuel significant growth in the blockchain-based IoT market for linked medical devices. The need for blockchain technology and IoT-based medical device to enhance their health IT infrastructure and design and development techniques will only get louder in the future. Blockchain technology will be essential in the future of cybersecurity, because blockchain technology can be significantly improved with the cybersecurity adoption of IoT devices, i.e., via remote monitoring, reducing waiting time for emergency rooms, track assets, etc. This paper sheds the light on the benefits of the blockchain-based IoT market.

• Journal of Arbitration Studies
• /
• v.27 no.2
• /
• pp.83-105
• /
• 2017

In contemporary society interest in and consumption of beauty treatment are increasing, raising interest in health and beauty. However, beauty-related laws are becoming factors of hindrance of beauty development. Currently the Public Health Control Act plays a basic role in the beauty art business in Korea, However the contents are in discord with international laws and its definition is not clear. Therefore it is causing conflicts of different occupations and job associations which are similar to art business. Especially, because neither definitions nor policies on beauty care devices exist in the Public Health Control Act, beauty care devices using in foreign countries cannot be used in Korea due to classification as medical devices. Under this circumstance, therefore, beauty care device uses by beauty artists violate the law. The government has tried to solve these irrational regulations. Recently, the Small and Medium Business Administration announced 'the improvement plan of small business and young founders site regulation for public economy recovery' in a ministerial meeting on December 28, 2016. Regulations on policy preparation for skincare devices were inclusive in this announcement. It is the question whether the regulations will be executed or not. Even though beauty industrial competitiveness was presented in the 18th Presidential Council on National Competitiveness in 2009, it was not practiced. The proposal bills for beauty law improvement have been put forth several times since 2000 including an improvement plan for regulating beauty care devices. However, so far there have been no improvements. The damage on the regulation classifying beauty devices as medical devices is not only restricted to skincare. This develops beauty devices and the beauty industry which imports and exports beauty devices. When beauty devices are exported, complicated procedures are unavoidable and when beauty devices are imported, irrational problems like reregistration procedures and costs occur. The reason why an improvement plan has not gone into practice is the resistance of the dermatologists' association. Dermatologists tend to stand positively against harming public health by saying that beauty devices used by beauty artists cause people to suffer side effects. In contrast, anyone who has a licence to use beauty devices is able to use them in foreign countries. It is not only infringement of one's right as a beauty artist but also people's right to receive beauty care services. With this reason, Korean's current law under which beauty devices are ruled as medical devices should be revised with accordance to domestic surroundings. Therefore in order to advance and globalize the beauty industry, the support and cooperation of the Korean government and relevant associations is needed to legislate and revise the beauty devices laws. The relevant associations abandon regional self-centeredness and cooperate to define ranges, size and management of beauty devices for safe use. If no collaboration exists, an arbitration agency should be established to solve the problem.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.1
• /
• pp.113-127
• /
• 2010

The purpose of this study is to develop and to verify an effect of a group counselling program for children who are in need of improving social skills and relationships. In order to meet this goal, the study procedure was employed as follows: First, the literature review of studies on childrens in social welfare institutions was implemented. Second, to analyze need of staffs in facilities and to specify the present condition of children, 100 staffs were participated in basic investigation. The result of investigation revealed that social skill development programs should be held in form of total 11~12 sessions once or twice in a week, with 50~60 minutes per session. Third, based on the literature review and current situation investigation results, a program for improving social skills and competencies of children was developed. To verify the program, two groups composed of elementary children who are fourth grade to sixth grade were organized. The groups were a experimental group which was provided with a group counselling program and a control group with no program. The program was composed of twelve sessions throughout six weeks, and the subjects took social skill test after taking the program to verify educational effects. T-test were implemented to analyze difference of the test results of two groups statistically. As a result of a research, following major two findings were specified: (1) experimental group showed significant difference in the score of self-assertion, cooperation, and self-control, which indicates that the program was effective for social skill improvement: (2) according to the test result, the self-assertion, cooperation, and self-control skills were clearly improved. In conclusion, the program turned out to be an effective and a positive educational device to enhance social skills of the children. The program developing model were suggested to improve social skills of children in the state of family devision based on the study findings. The follow-up future studies should elaborate program models for various-aged children and for children with various learning styles. Furthermore, qualitative study method should be employed which can specify social attitude change of children.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2015

Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2001

Major deficiencies of current automation scheme including various robots for bioproduction include the lack of task adaptability and real time processing, low job performance for diverse tasks, and the lack of robustness of take results, high system cost, failure of the credit from the operator, and so on. This paper proposed a scheme that could solve the current limitation of task abilities of conventional computer controlled automatic system. The proposed scheme is the man-machine hybrid automation via tele-operation which can handle various bioproduction processes. And it was classified into two categories. One category was the efficient task sharing between operator and CCM(computer controlled machine). The other was the efficient interface between operator and CCM. To realize the proposed concept, task of the object identification and extraction of 3D coordinate of an object was selected. 3D coordinate information was obtained from camera calibration using camera as a measurement device. Two stereo images were obtained by moving a camera certain distance in horizontal direction normal to focal axis and by acquiring two images at different locations. Transformation matrix for camera calibration was obtained via least square error approach using specified 6 known pairs of data points in 2D image and 3D world space. 3D world coordinate was obtained from two sets of image pixel coordinates of both camera images with calibrated transformation matrix. As an interface system between operator and CCM, a touch pad screen mounted on the monitor and remotely captured imaging system were used. Object indication was done by the operator’s finger touch to the captured image using the touch pad screen. A certain size of local image processing area was specified after the touch was made. And image processing was performed with the specified local area to extract desired features of the object. An MS Windows based interface software was developed using Visual C++6.0. The software was developed with four modules such as remote image acquisiton module, task command module, local image processing module and 3D coordinate extraction module. Proposed scheme shoed the feasibility of real time processing, robust and precise object identification, and adaptability of various job and environments though selected sample tasks.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.573-578
• /
• 2008

Recently, we should control various devices such as TV, audio, DVD player, video player, and set-top box simultaneously to manipulate home theater system. To execute the function the user want in this situation, user should know functions and positions of the buttons in several remote controllers. Normally, people feel difficult due to these realistic problems. Besides, the number of the devices that we can control shall increase, and people will confuse more if the ubiquitous home environment is realized. Therefore, user adaptive interface that provides the summarized functions is required. Moreover there can be a lot of mobile and stationary controller devices in ubiquitous computing environment, so user interface should be adaptive in selecting the functions that user wants and in adjusting the features of UI to fit in specific controller. To implement the user and controller adaptive interface, we modeled the ubiquitous home environment and used modeled context and device information. We have used Bayesian network to get the degree of necessity in each situation. Behavior selection network uses predicted user situation and the degree of necessity, and it selects necessary functions in current situation. Selected functions are used to construct adaptive interface for each controller using presentation template. For experiments, we have implemented ubiquitous home environment and generated controller usage log in this environment. We have confirmed the BN predicted user requirements effectively as evaluating the inferred results of controller necessity based on generated scenario. Finally, comparing the adaptive home UI with the fixed one to 14 subjects, we confirmed that the generated adaptive UI was more useful for general tasks than fixed UI.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2917-2923
• /
• 2015

In spite of a recent trend of container ships becoming larger in size, the current circumstance is that managing reefer containers marine transportation is being mostly dependent upon manpower. Particularly, in the case of bad weather or nighttime, reefer containers are not being monitored due to lack of safety device. For the purpose of reducing such risk, IMO is recommending a system using PLC but the system is not being used. In addition, they are still relying on manpower for control and reliability of freight in transit is decreasing due to lack of information during marine transportation for every subject related to freight as well as shipper. Accordingly, the purpose of this paper is to propose a real-time reefer container management system to effectively control all reefer containers widely being used across the world.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1298-1306
• /
• 2014

In this paper, we use the ECMA-392 standard, the first cognitive radio networks to meet the demand for IT services in the ship. And, we investigate about the conflicts of devices that support multi-hop network based on the ECMA-392. Therefore, we propose the resolution scheme of CRP reservation conflicts to solve this. The current CRP reservation approaches does not solve the CRP reservation conflicts of ECMA-392 between devices that move at a distance of three hops. Therefore, it is not possible to guarantee the QoS of real time services such as multimedia streaming. So, we provide a new CRP reservation scheme to avoid conflict through a new 2-hop CRP Availability IE and the change of CRP Control field. From the simulation results, we know that the proposed method of 3 hops CRP reservation conflicts resolution improves the throughput of device.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.91-105
• /
• 2016

Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of ${\Phi}_{M1}/{\Phi}_{M2}$ have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.