• Journal of Radiation Protection and Research
• /
• v.34 no.3
• /
• pp.115-120
• /
• 2009

Since 1990s, some events - detection of a dirty bomb in a Russian nation park in 1995, 9/11 terrorist attack to WTC in 2001, discovery of Al-Qaeda's experimentation to build a dirty bomb in 2003 etc - have showed that nuclear or radiological terrorism relating to radioactive materials (hereinafter "radioactive materials" is referred to as "nuclear material, nuclear spent fuel and radioactive source") is not incredible but serious and credible threat. Thus, to respond to the new threat, the international community has not only strengthened security and physical protection of radioactive materials but also established prevention of and response to illicit trafficking of radioactive materials. In this regard, our government has enacted or revised the national regulatory framework with a view to improving security of radioactive materials and joined the international convention or agreement to meet this international trend. For the purpose of prevention of nuclear/radiological terrorism, this paper reviews physical characteristics of nuclear material and existing detection instruments used for prevention of illicit trafficking. Finally, national detection regime against nuclear/radiological terrorism based on paths of the smuggled radioactive materials to terrorist's target building/area, national topography and road networks, and defence-in-depth concept is suggested in this paper. This study should contribute to protect people's health, safety and environment from nuclear/radiological terrorism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.13-24
• /
• 2000

Current specification prescribes that upper and lower reinforcement mat is required in the same amount to resist negative and positive moment in bridge decks. But the negative moment is much smaller than positive moment because the actual behavior of decks consists of local deflection of slab and global deflection of girder. From this study, the analysis method based on harmonic analysis and slope-deflection method was developed and verified by finite element method. The negative moment, obtained from this method, were smaller than those computed based on the KHBDC specifications as much as 40∼50% in the middle of bridge. The amount of reduction of the design negative moment was shown herein to be dependent on variable parameters as shape factor(S/L) of slab, relative stiffness ratio of girder and deck slab, and so on. This investigations indicate that the upper reinforcement mat to resist negative moment can be removed. But further experimental study is required to consider durability and serviceability. From this new design concept, the construction expense can be reduced and the problem of decreasing durability resulting from corrosion of upper reinforcement steel settled.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.565-577
• /
• 2012

Various factors affecting teachers' self-confidence exist in math class using technology such as graphic calculators. For example, internal factors such as teachers' attitude and external factors such as school administrators or colleague's support can be considered. Pedagogical Technology Knowledge(PTK) is the very important factor which determines teacher's self-confidence in educational technology, and the development of PTK is composed of teacher's perception on the technology and its application and instrumentation. This study investigated 19 pre-service and current middle and high school teachers in the respect of their change of self-confidence, attitude, expertise on pedagogical technology, and quality of math class. These are anlayzed with the concept of instrumentation and instrumentalization through various experiences like graphic calculator, GPS and AutoGraph. The result indicated that constraints or obstacles did not affect much if teachers' attitude and self-confidence were strong. Particularly teachers' firm will to learn about technology and their confidence on its value are the critical factors in using technology for mathematics class.

• Asia pacific journal of information systems
• /
• v.10 no.2
• /
• pp.71-95
• /
• 2000

Despite repeated exhortation about the importance of social and human dimensions of systems development, socio-organizational issues continue to be neglected and ignored in the current information systems practice. A review of the human information processing literature suggests that the reasons for this continuing lack of attention to social issues may be found in the limitations of human cognition and information processing capacities. Bostrom and Heinen(1978) and Kumar and Bjorn-Anderson(1990) also suggest that the inadequate attention to social problems and issues by the analyst could originate from the analysts limited problem perception. This research explores how the representation forms of information systems(IS) methodology used in understanding and modeling the problem situation affect such systems development problem perception. Typically, a system development methodology prescribes the use of system models(i.e., system representations) to understand, analyze, evaluate, and design the information system. Given the size and complexity of information systems, and the abstraction and simplification underlying the modeling process, system representations usually depict only a limited set of aspects of the system. Thus, a methodology whose representations are limited to technical aspects will tend to limit the analyst's perspective to a technical one only(Kumar & Welke, 1990). Following the same line of argument, in contrast, it is the conjecture of this study that a methodology which specifies both social and technical aspects of IS development will help the analyst develop a more comprehensive view of the IS problem domain. Based on the above concept, a theoretical model was first developed which explained the systems analysts cognitive process. Drawing on this model, a research model was developed hypothesizing the impacts of representation forms on problem identification. The model was tested using a laboratory experiment with 70 individual subjects. A special computer software was developed with a hypermedia authoring tool to conduct the experiments in order to avoid experimenter biases and to maintain consistency in administrating repeated experiments. The program, designed to replace the experimenter, consisted of functions such as presenting the subjects with problem material, asking the subjects questions, and saving the typed answers of the subjects. The results indicate that representation forms strongly influence problem identification. It was found that the use of the socio-technical representation form led to the findings of more social problems than the use of technical representation form. The results imply significant effects of representation forms on problem findings and also suggest that the use of adequate representation forms may help overcome dysfunctional effects of our limited information processing capacity.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1173-1185
• /
• 2008

The design methods of the road surface drainage facilities were compared for the improvement of design method. We have developed four computational design models classified by the methods to determine the duration of design rainfall and to analyze the flow of a linear drainage channel. The critical duration was determined by assuming the critical duration to be 10 minutes or by finding the duration of design storm being similar to the travel time of flow by trial and error. The flow of a linear drainage channel was analyzed as the uniform flow or the varied flow. The design models were applied to the artificial road surface drainage facilities with various channel slopes and road shoulder slopes. If the rainfall intensity of the 10 minutes duration was applied, the outlet spacing obtained from the design based on the varied flow analysis was larger than the uniform flow analysis only when the channel slope and the road shoulder slope was small. On the other hands, if the duration of design rainfall was determined by calculating the travel time, the varied flow analysis brought about larger outlet spacing than the uniform analysis for all conditions. However, the model of the critical duration concept and the varied flow analysis resulted in smaller outlet spacing than the current design method employing the rainfall of 10 minutes duration and the uniform flow analysis.

• Korean Educational Research Journal
• /
• v.37 no.1
• /
• pp.1-18
• /
• 2016

'The Training for School Organization Management' is a essential teacher training system in order to develop qualification and ability of teachers who have to be the flexible to the recent changeable society. The concept which the school management issue is only belong to the principle is changed now. The thought that 'the school as a team' is broadly accepted. As a result, every teachers including the parents, community people are thinking the solution about the management issues of the school. The changes in the framework of these thoughts is from the recognition that the school management is no longer the preservation only to the manager such as the principle. 'the school linked to the community', 'the school which information is open to all public', the school which is thinking about the curriculum' are highlighted as an alternative which can solve the current education issue. The new curriculum of 'The Training for School Organization Management' is necessary to be in accordance to the new school curriculum because we have to run a new school system in the complex educational circumstance.

• The Journal of Fisheries Business Administration
• /
• v.49 no.1
• /
• pp.51-66
• /
• 2018

During the Joseon period, the East Sea would be called 'Gyeonghae' due to a large number of whales. In the Republic of Korea, whaling was locally permitted in 1946. However, the number drastically dropped because the hunting of the marine mammal had already been carried out in Russia, the U.S. and Japan since 1800s. Before a moratorium on commercial whaling was introduced by the International Whaling Commission(IWC) in 1986, whale populations in the East Sea had plunged. Furthermore, Korean gray whales and fin whales weren't found anymore in that area. With the suspension, whale hunting was banned in Korea as well. Even so, accidentally caught whales have been allowed to be distributed on the market with respect for local food culture. With the establishment of Whale Museum and hosting of the 57th Annual Meeting of the International Whaling Commission(IWC) at Jangsaengpo in 2005, whale tourism was facilitated in earnest. This whale tourism has been operated by Nam-gu Office and Nam-gu City Management Corporation in Ulsan. However, the popularity of whale tourism has increased a demand for whale meat. At the same time, there has been concern over decrease in whale populations because of illegal whaling. In addition, a conflict between the use and protection of whales has caused confusion in tourism identity. Actually, there is a serious doubt on the sustainability of whale tourism due to the decade-long deficit and excessive investments. This study attempts to define a concept of whale tourism and propose a future direction for the sustainable growth and development of Korea's whale tourism industry after developing such comprehensive assessment indicators as a basic research for the introduction of sustainable whale tourism. To achieve the aim of this study, AHP(Analytic Hierarchy Process) was chosen as a main research tool and the factors were ranked by a comprehensive analysis of principal factors and detail factors. The current study showed the following results. First, ecological environment(0.430) was indicated the most important factor of whale tourism assessment indicators. Moreover, Population(0.1302), Action for Cetacean protection(0.1031), Governance(0.0898) were critical factors. On the other hand, Accommodations(0.0085), Whale meat(0.0088) were unimportant factors than others.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.147-160
• /
• 1997

"The "Map Algebra", beeing recognized as a viable theoretical framework for GIS (Geographica Infonnation System), models map layers as "operands" which are the basic unit of geo-processing, and a variety of GIS commands as "operators." In this paper, we attempt at lifting some limitations of map algebras proposed in GIS literature. First, we model map layer as "function" such that we may employ the notion of meta operator (or, higher-order funtion) available in the functional programming paradigm. This approach provides map algebraic language with "programmability" needed in GIS user language. Second, we extend the semantics of, and improve on the sytactic structure of map algebraic language. Mer the data model and language associated with map algebra are formalized, we proceed to design and implement a prototype of map algebraic processor. The parser of the language in our prototype plays the role of transforming the native and heterogeneous user language of current GISs into a canonical map algebraic language. The prototype, named "MapSee" is a proof-of-concept system for the ideas we propsed in this paper. We believe that the uniform interface based on the map algebraic language will make promising infrastructure to support "Internet GIS." This is because the uniform but powerful interface through the Web clients allow access to both geo-data and geo-processing resources distributed over the network.to both geo-data and geo-processing resources distributed over the network.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.123-129
• /
• 2009

Ubiquitous home is emerging as the future digital home environments that provide various ubiquitous home services like u-Life, u-Health, etc. It is composed of some home appliances and sensors which are connected through wired/wireless network. Ubiquitous home services become aware of user's context with the information gathered from sensors and make home appliances adapt to the current home situation for maximizing user convenience. In these context-aware home environments, it is the one of significant research topics to predict user behaviors in order to proactively control the home environment. In this paper, we propose Multi-Level prediction algorithm for context-aware services in ubiquitous home environment. The algorithm has two phases, prediction and execution. In the first prediction phase, the next location of user is predicted using tree algorithm with information on users, time, location, devices. In the second execution phase, our table matching method decides home appliances to run according to the prediction, device's location, and user requirement. Since usually home appliances operate together rather than separately, our approach introduces the concept of mode service, so that it is possible to control multiple devices as well as a single one. We also devised some scenarios for the conceptual verification and validated our algorithm through simulations.