• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.27-31
• /
• 2015

It was the electrical properties of ZnS treated by the annealing in a vaccum and an atmosphere conditions to reseached the leakage current effect of semiconductor devices. Most samples were shown the non-linear with unipolar properties, but the ZnS annealed at $100^{\circ}C$ in a vaccum was only observed no leakage current in a range of -20 V< voltage < 15 V. The crystallinity of ZnS with no leakage current was improved and optical property was also improved. Because the ambipolar characteristics and low leakage currents originated from the extension effect of a depletion width by electron-hole combination in the depletion layer.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.948-956
• /
• 2010

The purpose of this study was to test the effectiveness of a prototype KAFO (Knee-Ankle-Foot Orthosis) powered by two artificial pneumatic muscles during walking. We had previously built powered AFO (Ankle-Foot Orthosis) and KO (Knee Orthosis) and used it effectively in studies on assistance of plantaflexion and knee extension motion. Extending the previous study to a KAFO presented additional challenges related to the assistance of gait motion for rehabilitation training. Five healthy males were performed gait motion on treadmill wearing KAFO equipped with artificial pneumatic muscles to power ankle plantaflexion and knee extension. Subjects walked on treadmill at 1.5 km/h under four conditions without extensive practice: 1) without wearing KAFO, 2) wearing KAFO with artificial muscles turned off, 3) wearing KAFO powered only in plantaflexion under feedforward control, and 4) wearing KAFO powered both in plantaflexion and knee extension under feedforward control. We collected surface electromyography, foot pressure and kinematics of ankle and knee joint. The experimental result showed that a muscular strength of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be lower due to pneumatic assistance and foot pressure of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be greater due to power assistance. In the result of motion analysis, the ankle angle of powered KAFO in terminal stance phase was found a peak value toward plantaflexion and there were difference of maximum knee flexion range among condition 2, 3 and 4 in mid-swing phase. The current orthosis design provided plantaflexion torque of ankle jonit in terminal stance phase and knee extension torque of knee joint in mid-swing phase.

• 전기학회논문지
• /
• 제68권4호
• /
• pp.593-597
• /
• 2019

We proposed a current Interruption type DC superconducting circuit breaker(I-DC SCB), a protection device that combines the current limiting technology of a superconductor with the cut-off technology of circuit breaker. Unlike existing protective devices, the current I-DC SCB is a device that combines two protection functions, notably improving failure probability and operational reliability. It is also applicable to all DC systems, such as HV, MV, and LVDC, due to the ease in capacity increase. The 100 kV I-DC SCB was designed after taking into account the actual power system conditions, followed by an analysis of the transient characteristics and the breaking range of the limiter. The results of the analysis showed that the I-DC SCB had a fault current limit of about 75% at the rated voltage, and completed the cut-off operation within about 20 ms.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.399-405
• /
• 2001

A dynamic force balance model is proposed in this work as an extension of the previous static force balance model to predict metal transfer in arc welding. Dynamics of a pendant drop is modeled as the second order system, which consists of the mass, spring and damper. The spring constant of a spherical drop at equilibrium is derived in the closed-form equation, and the inertia force caused by drop vibration is included in the drop detaching condition. While the inertia force is small in the low current range, it becomes larger than the gravitational force with current increase. The inertia force reaches half of the electromagnetic force at transition current, and has considerable effects on drop detachment. The proposed dynamic force balance model predicts the detaching drop size more accurately than the static force balance model.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권11호
• /
• pp.568-574
• /
• 2001

This paper describes a current fed high frequency resonant inverter can be used as the power supply for wax-sealing. This circuit configuration is composed of conventional two unit inverter of single ended current find type in parallel. The proposed inverter can realize ZVS operation by using resonant capacitor to ZVS capacitor and has merits not only reduction of switch current distribution but also extension of load range in comparison with the conventional single-ended current fed high frequency resonant inverter. This analysis of proposed circuit uses normalized parameter and characteristic estimation which is needed in each step before design is generally described according to normalized frequency($\mu$), normalized resistance(λ) and parameters. On the basis of characteristic values, a method of the circuit design is presented. Also, the theoretical analysis is proved through experiment and this proposed circuit shows that it can be practically used as the power supply system for wax-sealing and DC-DC converter.

• Fisheries and Aquatic Sciences
• /
• 제27권3호
• /
• pp.137-144
• /
• 2024

Exacanthomysis marsailiae and Nipponomysis neolingvura are described as new species based on specimens collected with a light trap off the East Sea coast of Korea. E. marsailiae is closely related to Exacanthomysis alaskensis (Banner, 1954) and Exacanthomysis borealis (Banner, 1954). However, E. marsailiae can be distinguished from these species by having slightly grouped spines on lateral margins near the telson apex, and the exopod of male's fourth pleopod more than twice as long as the endopod. N. neolingvura can be distinguished from its closest relative, Nipponomysis lingvura (Murano, 1977), in that the lateral sides of the telson are all armed with spines without any empty space, and that the second segment of the fourth male pleopod is longer than the third one. The report of E. marsailiae from the East Sea of Korea extends the distribution range of the genus Exacanthomysis from the high-latitude North Pacific southward to the mid-latitude waters of the western Pacific. The morphological characteristics of the two current new species are also compared with those of their congeners.

• 반도체디스플레이기술학회지
• /
• 제8권1호
• /
• pp.39-42
• /
• 2009

In this paper an attempt for realizing a storage system which works as a part of human brain has been discussed. The system is expected to be able to coordinate with human brain. And current storage may have inherent problem due to an intrinsic attribute of storage, exclusiveness. Directory structure in it must be a source of confusion, if it used out side of the range of limitation. Adapting multidimensional annotation of file name extension and directory-less file system, a new storage system able to associate and coordinate with human brain may be available near future. This paper showed that the limitation of current storage system clearly exists, because of human brain limitation to memorize directory name.

• 보건행정학회지
• /
• 제17권1호
• /
• pp.1-27
• /
• 2007

This study is designed to estimate an appropriate level of patient's cost-sharing for oriental medical services in the Korean National Health Insurance. The findings of this study can be summarized as follows: 1) The current co-payment system for oriental medical services does not reflect its cost structure in clinical practice due to inconsistency of cost-sharing plan in the NHI. 2) Both oriental medical institutions and their patients, as a result, are at a relative disadvantage in financial burden, compared with other services. 3) The substantial proportion of patients' cost-sharing depends on the amount of co-payment and the range of medical cost that a flat rate is applied to. 4) The extension of the range doesn't make any substantial decrease in patient's cost-sharing. 5) The fixed amount of co-payment is more sensitive than a range to total variations of patient's cost-sharing. Based on the above, the budget impacts of a new co-payment system were estimated for each co-insurance rate, according to given scenarios. The results range from -59 billion Won (-8.5%) to 16 billion Won(2.3%).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.225-230
• /
• 2000

This paper describes a double-ended current fed push-pull type high frequency resonant inverter used as the power supply for wax-sealing. The proposed inverter can realize ZVS operation by using resonant capacitor to ZVS capacitor and has some merits not only reduction of switch current distribution but also extension of load range compare to the conventional single-ended current fed push-pull type high frequency resonant inverter. This analysis of proposed circuit uses normalized parameter ad characteristic estimation which is needed in each step before design is generally described according to normalized frequency($\mu$), normalized resistance(λ) and parameters. It is also presented as an example of method of the circuit design based on estimation analysis values from theoretical analysis. The theoretical analysis is proved through experiment and this circuit shows that it can be used practically as the power supply system for wax-sealing and DC-DC converter.