• Geomechanics and Engineering
• /
• v.11 no.4
• /
• pp.471-492
• /
• 2016

Underground tunnelling is one of the sustainable construction methods which can facilitate the increasing passenger transportation in the urban areas and benefit the community in the long term. Tunnelling in various ground conditions requires careful consideration of the stability factor. This paper investigates three dimensional stability of a shallow circular tunnel in a layered soil. Upper bound theorem of limit analysis was utilised to solve the tunnel face stability problem. A three dimensional kinematic admissible failure mechanism was improved to model a layered soil and limiting assumptions of the previous studies were resolved. The study includes calculation of the minimum support pressure acting on the face of the excavation in closed-face excavations. The effects of the characteristics of the layers on the minimum support pressure were examined. It was found that the ratio of the thickness of cover layers particularly when a weak layer is overlying a stronger layer, has the most significant influence on the minimum tunnel support pressure. Comparisons have been made with the results of the numerical modelling using FLAC3D software. Results of the current study were in a remarkable agreement with those of numerical modelling.

• CELLMED
• /
• v.6 no.4
• /
• pp.27.1-27.4
• /
• 2016

Anxiety is a common clinical presentation. Primary anxiety poses a significant problem in its management. Many among the current treatment options of anxiety are habit forming causing significant withdrawal symptoms. There are dose dependent responses often associated with drug adversities. Day time sedation is an undesired effect of many drugs used for anxiety management limiting its usage. Ayurveda recommends a bio- physical procedure to manage anxiety. Shirodhara, a dripping procedure is utilized as a front line therapy for anxiety in Ayurveda. Seeing the limitations of conventional biomedical management of anxiety requiring an improvement upon the existing protocols of managements, and also seeing the use of shirodhara for anxiety management in ayurvedic clinics, a pragmatic study to evaluate the effect of shirodhara in generalized anxiety disorder was done. This was a pragmatic study consisting of shirodhara with ksheer bala oil as an intervention upon generalized anxiety disorder patients. The study was conducted upon 13 patients and observations were done for six weeks. The responses observed through the changes in Hamilton Anxiety Scale were evaluated using paired t test to observe the pre-post significance.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.6
• /
• pp.962-971
• /
• 2002

The current study proposes a simple monodimensional model to estimate the linear growth rate of photosynthetic microorganisms in flat-plate photobioreactors (FPPBRs) during batch cultivation. As a model microorganism, Chlorella kessleri was cultivated photoautotrophically in FPPBRs using light-emitting diodes (LEDs) as the light sources to provide unidirectional irradiation in the photobioreactors. Various conditions were simulated by adjusting both the intensity of the light and the height of the culture. The validity of the proposed model was examined by comparing the linear growth rates measured with the predicted ones obtained from the proposed model. Accordingly, the value of $\frac{K\cdot\mu m}{\alpha\cdot L}log(I_0\cdot{I_s}^{\varepsilon 1)\cdot {I_c}^{-\varepsilon})$ was proposed as an approximate index for strategies to obtain the maximal lightn yield under light-limiting conditions for high-density algal cultures and as a control parameter to improve the photosynthetic productivity and efficiency.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.207-218
• /
• 1998

A site survey in two apartment complexes and a nursery experiment were carried out in this study to provide basic data of the long-pending growth characteristics of major landscaping trees, such as Picea abies, Pinus parviflora, Metasequoia glyptostroboides, Magnolia denudata, Acer buergerianum and Acer palmatum. According to the main results, the survival rates were very low, reflected by the average survival rate of the four species was 95% at the nursery site. And, it was presumed that the site conditions of two apartment complexes for tree growth were very inferior to those of the nursery site, taking into consideration that the increment percents of growth factors of the tree species at the nursery site were relatively higher than those of the apartment complexes. The distribution patterns of the current growth factors of trees showed a normal distribution. The regression equation of breast diameter on diameter at root collar showed especially high predictability. And, it was thought that the most critical limiting environmental factors on tree growth at the apartment complexes were found to be alkaline pH caused by excessive Ca, high percent base saturation, insufficiency of available moisture content, bad drainage due to inferior soil texture, high soil hardness, lack of organic matter and shortage of cation exchange capacity in soil.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.21-25
• /
• 2017

In this paper, we review relevant technologies of Mixed Reality(MR) and show important components of perspective that can overcome technical limitations of the current MR. An MR technology combines real and virtual objects in a real environment, and runs interactive in real time, and is regarded as an emerging technology in a large part of the future of Information Technology(IT). We've grouped the major obstacles limiting the wider use of MR technologies into three themes: technological limitations (i,e., tracking, rendering, authoring, and registration), user interface(UI) limitations(i.e., UI metaphor for MR interaction), and social acceptance issues.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.269-280
• /
• 2017

To lower the operational cost of microbubble generation by electrolysis, optimization of parameters limiting the process must be carried out for the process to be fully adopted in environmental and industrial settings. In this study, four test electrodes were used namely aluminum, iron, stainless steel, and Dimensionally Sable Anode (DSA). We identified the effects and optimized each operational parameter including NaCl concentration, current density, pH, and electrode distance to reduce the operational cost of microbubble generation. The experimental results showed that was directly related to the rate and cost of microbubble generation. Adding NaCl and narrowing the distance between electrodes caused no substantial changes to the generation rate but greatly decreased the power requirement of the process, thus reducing operational cost. Moreover, comparison among the four electrodes operating under optimum conditions revealed that aluminum was the most efficient electrode in terms of generation rate and operational cost. This study therefore presents significant data on performing costefficient microbubble generation, which can be used in various environmental and industrial applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.601-610
• /
• 2016

The light-emitting diode (LED) has been used in a variety of industrial fields and for general 0lighting purposes on account of its high efficiency, low power consumption and long lifespan. The LED is driven by direct current; therefore, an AC/DC converter is typically required for its use. An electrolytic capacitor is generally used for stabilizing DC voltage during use of the AC/DC converter. However, this capacitor has a short lifespan, which makes it a limiting factor in LED lighting. Furthermore, LED lighting requires a dimmable control to enable energy savings and fulfil a growing consumer demand. In this paper, the dimmable single-stage power factor correction (PFC) continuous conduction mode (CCM) flyback converter that employs no electrolytic capacitor is presented. The LC resonant filter is alternatively applied to reduce the 120[Hz] ripple on the output. And the optimum value of the LC resonant filter parameters considering both efficient and performance is analysed. Simulation and experimental results verify the satisfactory operation of the converter.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.2
• /
• pp.1-15
• /
• 2007

In this paper, we review relevant technologies of MR (Mixed Reality) and show important components of perspective that can overcome technical limitations of the current MR. An MR technology combines real and virtual objects in a real environment, and runs interactive in real time, and is regarded as an emerging technology in a large part of the future of IT (Information Technology). We've grouped the major obstacles limiting the wider use of MR technologies into three themes: technological limitations (i,e., tracking, rendering, authoring, and registration), user interface limitations(i.e. UI metaphor for MR interaction), and social acceptance Issues.

• Molecules and Cells
• /
• v.28 no.6
• /
• pp.515-520
• /
• 2009

Applications of bone marrow-derived mesenchymal stem cells in gene therapy have been hampered by the low efficiency of gene transfer to these cells. In current transduction protocols, retrovirus particles with foreign genes make only limited contact with their target cells by passive diffusion and have short life spans, thereby limiting the chances of viral infection. We theorized that mechanically agitating the virus-containing cell suspensions would increase the movement of viruses and target cells, resulting in increase of contact between them. Application of our mechanical agitation for transduction process has increased the absorption of retrovirus particles more than five times compared to the previous static method without changing cell growth rate and viability. The addition of a mechanical agitation step increased transduction efficiency to 42%, higher than that of any other previously-known static transduction protocol.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.479-500
• /
• 2016

Seismic design criteria allow enhancing the structural ductility and controlling the damage distribution. Therefore, detailing rules and design requirements given by current seismic codes might be also beneficial to improve the structural robustness. In this paper a comprehensive parametric study devoted to quantifying the effectiveness of seismic detailing for steel Moment Resisting Frames (MRF) in limiting the progressive collapse under column loss scenarios is presented and discussed. The overall structural performance was analysed through nonlinear static and dynamic analyses. With this regard the following cases were examined: (i) MRF structures designed for wind actions according to Eurocode 1; (ii) MRF structures designed for seismic actions according to Eurocode 8. The investigated parameters were (i) the number of storeys; (ii) the interstorey height; (iii) the span length; (iv) the building plan layout; and (v) the column loss scenario. Results show that structures designed according to capacity design principles are less robust than wind designed ones, provided that the connections have the same capacity threshold in both cases. In addition, the numerical outcomes show that both the number of elements above the removed column and stiffness of beams are the key parameters in arresting progressive collapse.