• Advances in concrete construction
• /
• 제10권5호
• /
• pp.393-402
• /
• 2020

The given research focuses on examining the effect of relatively humidity (RH) and curing temperature on the hydrates as well as the porosity of calcium sulfoaluminate (CSA) cement pastes. Numerous tests, which consist of mercury intrusion porosimetry (MIP), thermosgravi metric (TG) and X-ray diffraction (XRD) were conducted. Various characterization techniques which include, scanning electron microscopy, Fourier transform microscopy along with X-ray diffraction evaluations were conducted on the samples to examine phase formation and crystallinity, morphology and microstructure along with bond formations and functional groups, respectively. During long-term study, the performance of concrete which consisted of limestone and flash-calcined was close to those from standard Portland cement concrete. Traditional classifications and methods of corrosion were widely used for the assessment of steel in concrete which may get employed to concrete which contains LC3 to recalibrate the range of polarization resistance for passitivity condition. For example, there is up to 79.5% and 146% respective flexural and compressive strengths. Moreover, they developed more advance electrical and thermo-mechanical performance with a substantial reduction in absorption of water of close to 400%. These advantages allow this research crucial to evaluate how these methods can be applied. Additionally, the research evaluates developed and more advanced cement preservation and repair techniques. The conclusion suggests concerted efforts by various stakeholders such as policy makers to enable low-carbon rates.

• 한방안이비인후피부과학회지
• /
• 제29권3호
• /
• pp.95-105
• /
• 2016

Objectives : Allergic diseases have a various symptoms of hyperresponsiveness and recently hyperresponsive reaction in the chronic phase is reported as the important mechanisms. Cheonggisan(CGS) is used in oriental clinics for curing various skin diseases due to effect of controlling of pruritus. There have been studies on the anti-allergic effect and anti-inflammatory effect of CGS, but there had no study of anti-allergic effects in allergic late inflammation of CGS, so we aimed to find out the effects of CGS in allergic late inflammation in our study.Methods : To investigate the anti-allergy effect and anti-inflammatory effect of CGS, RAW 264.7 macrophage cells and CSG water-extracts were used. Cytotoxic effect of CSG was examined by MTT assay, an oxidative product of NO was measured in the culture medium by the Griess reagent assay. The level of prostaglandin E2(PGE2) was measured by competitive enzyme-linked immunoassay. Cytokine(PGE2, IL-1β, IL-6, TNF-α) was measured by Bio-Plex suspension assay system and quantitative multiplexed cytokine/chemokine assay.Results : We investigated that there was no cytotoxic effect of CGS water-extract at any levels of concentration on RAW 264.7 macrophage cells by MTT assay. CGS water-extracts significantly suppressed the levels of the inflammatory mediators such as NO and PGE2, cytokine of IL-1β, TNF-α at the level of 400 ㎍/㎖ CGS concentration. But there was no significant effect on IL-6 production suppression.Conclusions : These results suggest that CSG water-extract has and anti-inflammatory effects in allergic reaction. These properties may contribute to the allergic diseases and inflammatory related disease care.

• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2012

금속 주조시 사용되는 탄소이형제를 카본블랙과 점증제 겸 알데하이드 화합물의 경화제로 사용될 수 있는 수용성 고분자인 잔탄검(X-gum), 카르복시메틸셀룰로오스(CMC)을 혼합하여 제조하였다. 이 때 카본블랙의 안정한 분산을 위하여 0.25 wt%의 X-gum 또는 1.0 wt%의 CMC가 적당하였다. 1.0 wt% 보다 낮은 농도의 CMC를 사용했을 경우 카본블랙이 매우 쉽게 층분리되었다. 유리판에 대한 부착력은 경화제와, 구르탈알데하이드 및 사슬연장제인 올리고당의 양에 비례하였으며. X-gum으로 제조된 탄소 이형제는 CMC를 이용해 제조된 것보다 유리에 대한 부착력이 우수하였다. 결과적으로 본 실험의 최적 조건에서 제조된 탄소이형제는 친환경적으로 주조시에 적용할 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.734-738
• /
• 2008

Ettringite$(3CaO{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2O)$, one of the hydrated phase of Portland cement is usually formed in the early stage of hydration by the reaction of tricalciumaluminate$(C_3A)$ and gypsum. The rapid and strong crystal growth of separated rod-shaped ettringite have been utilized for the preparation of special cements of rapid setting, high strength and non-shrinking properties. The ettringite also has been noticed as a promising materials for the immobilization of various waste ions because of its unique crystal structure which has abundant channels and exchangeable ionic compounds. In this study, the formation and growth behavior of the ettringite was investigated in the system $C_3A-CaSO_4-H_2O$ using $C_3A$ clinker and gypsum to obtain a microporous body for waste ion immobilization. Ettringite was revealed to form by the dissolution-precipitation mechanism and the bulk body was by the entangled growth of rod-shaped ettringite crystals. The hardened body was composed of nearly pure rod-shaped ettringite interlocked each other with adequate mechanical strength. The homogeneity of structure, pore size, specific surface area and porosity of the hardened body were influenced by reaction temperature, water/powder ratio and the curing time. The hardened body prepared with water/powder ratio of 1 at $24^{\circ}C$ for one day showed excellent morphological properties for the purposed materials.

• Elastomers and Composites
• /
• 제41권4호
• /
• pp.245-251
• /
• 2006

고무상으로 니트릴고무(NBR)을 플라스틱상으로 isotactic 폴리프로필렌(iPP)을 고무:플라스틱 비율이 70:30(wt:wt)되도록 내부혼합기에서 용융 혼합하고, 과산화물 가교제(DCP) 및 메타크릴산 아연염(ZDMA)을 첨가하여 동적 가교시킨 블렌드를 제조하였다. DCP만을 사용하여 동적가교시킨 블렌드에 비해 DCP와 ZDMA를 함께 첨가하여 제조한 동적가교시킨 블렌드가 우수한 인장물성, 인열강도 및 고무탄성을 나타내었다. 이는 메타크릴간 아연염의 첨가에 의해 동적가교과정 중 고무상의 가교밀도가 증가되고, 가교된 고무상이 플라스틱 연속상에 더 미세하게 분산되기 때문인 것으로 생각되었다. 또한, 제조된 블렌드는 반복 가공 시 물성의 큰 저하가 나타나지 않아 재활용성이 가능한 열가소성탄성체임을 알 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제31권10호
• /
• pp.1430-1437
• /
• 2021

Cronobacter sakazakii is an opportunistic pathogenic bacterium found in powdered infant formula and is fatal to neonates. Antibiotic resistance has emerged owing to overuse of antibiotics. Therefore, demand for high-yield bacteriophages as an alternative to antibiotics has increased. Accordingly, we developed a modified mass-production method for bacteriophages by introducing a two-stage self-cycling (TSSC) process, which yielded high-concentration bacteriophage solutions by replenishing the nutritional medium at the beginning of each process, without additional challenge. pH of the culture medium was monitored in real-time during C. sakazakii growth and bacteriophage CS01 propagation, and the changes in various parameters were assessed. The pH of the culture medium dropped to 5.8 when the host bacteria reached the early log phase (OD₅₄₀ = 0.3). After challenge, it decreased to 4.65 and then recovered to 4.94; therefore, we set the optimum pH to challenge the phage at 5.8 and that to harvest the phage at 4.94. We then compared phage production during the TSSC process in jar-type bioreactors and the batch culture process in shaker flasks. In the same volume of LB medium, the concentration of the phage titer solution obtained with the TSSC process was 24 times higher than that obtained with the batch culture process. Moreover, we stably obtained high concentrations of bacteriophage solutions for three cycles with the TSSC process. Overall, this modified TSSC process could simplify large-scale production of bacteriophage CS01 and reduce the unit cost of phage titer solution. These results could contribute to curing infants infected with antibiotic-resistant C. sakazakii.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.333-341
• /
• 2021

Steel slag, an industrial reject from the steel rolling process, has been identified as one of the suitable, environmentally friendly materials for concrete production. Given that the coarse aggregate portion represents about 70% of concrete constituents, other economic approaches have been found in the use of alternative materials such as steel slag in concrete. Unfortunately, a standard framework for its application is still lacking. Therefore, this study proposed functional model equations for the determination of strength properties (compression and splitting tensile) of steel slag aggregate concrete (SSAC), using gene expression programming (GEP). The study, in the experimental phase, utilized steel slag as a partial replacement of crushed rock, in steps 20%, 40%, 60%, 80%, and 100%, respectively. The predictor variables included in the analysis were cement, sand, granite, steel slag, water/cement ratio, and curing regime (age). For the model development, 60-75% of the dataset was used as the training set, while the remaining data was used for testing the model. Empirical results illustrate that steel aggregate could be used up to 100% replacement of conventional aggregate, while also yielding comparable results as the latter. The GEP-based functional relations were tested statistically. The minimum absolute percentage error (MAPE), and root mean square error (RMSE) for compressive strength are 6.9 and 1.4, and 12.52 and 0.91 for the train and test datasets, respectively. With the consistency of both the training and testing datasets, the model has shown a strong capacity to predict the strength properties of SSAC. The results showed that the proposed model equations are reliably suitable for estimating SSAC strength properties. The GEP-based formula is relatively simple and useful for pre-design applications.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.79-91
• /
• 2022

최근 폭우, 폭설 등과 같은 이상기후로 인해 도로, 철도 및 단지에 적용된 비탈면의 국부적 파괴 또는 손상 빈도가 점차 증가하고 있다. 초속경 복합매트(Rapid Hardening Composite Mat, RHCM)은 대규모 토공이 불필요하고 수해복구시간을 최소화할 수 있는 장점이 있어 대안으로 고려될 수 있다. RHCM은 대표적인 비탈면 보호공법인 숏크리트 공법 및 식생공 공법에 비해 중장비 설비가 불필요하고 유지관리가 용이하며, 기존 Geosynthetic Concrete Composite Mat(GCCM)에 비해 경화시간이 짧아 긴급복구가 가능하다는 장점이 있다. 따라서, 본 연구에서는 실내시험을 통해 RHCM의 강도 및 내구성을 측정하고 GCCM과 비교·분석하였다. 실내시험 결과 RHCM의 강도는 기존 GCCM에 비해 약 51% 높은 것으로 나타났으며, 내구성 또한 69% 높은 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.289-297
• /
• 2022

Deterioration in durability of structures due to the steel corrosion is difficult to determine whether or not corrosion is initiated and how much propagated, and moreover, repair and maintenance are not easy to deal with. Therefore, preventive treatments can be the best option to avoid the deterioration. Various methods for preventing corrosion of steel, such as electrochemical treatments, anti-corrosion agents and steel surface coatings, are being developed, but economic and environmental aspects make it difficult to apply them to in-situ field. Thus, the purpose of this study was to improve corrosion resistance by using CA-based clinker that are relatively simple and expected to be economically profitable Existing CA-based clinkers had problems such as flash setting and low strength development during the initial hydration process, but in order to solve this problem, CA clinker with low initial reactivity were used as binder in this study. The cement paste used in the experiments was replaced with CA₂ clinker for 0%, 10%, 20%, and 30% in OPC. And the mixture used in the chloride binding test for the extraction of water-soluble chloride was intermixed with Cl- 0.5%, 1%, 2%, and 3% by weight of binder content. To evaluate characteristic of hydration heat evolution, calorimetry analysis was performed and simultaneously chloride binding capacity and acid neutralization capacity were carried out. The identification of hydration products with curing ages was verified by X-ray diffraction analysis. The free chloride extraction test showed that the chlorine ion holding ability improved in order OC 10 > OC 30 > OC 20 > OC 0 and the pH drop resistance test showed that the resistance capability in pH 12 was OC 0 > OA 10 > OA 20 > OA 30. The XRD analyses showed that AFm phase, which can affect the ability to hold chlorine ions, tended to increase when CA₂ was mixed, and that in pH12 the content of calcium hydroxide (Ca(OH)₂), which indicates pH-low resistance, decreased as CA₂ was mixed

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.570-573
• /
• 2022

본 논문에서는 신경망 모델을 적용한 몰드변압기의 보이드 결함 크기 판별에 관한 연구를 수행하였다. PCB 기반의 로고우스키 코일형 부분방전 센서를 제작하여 부분방전 신호를 측정하였고, 보이드에 의한 부분방전 결함을 모의하기 위한 PD 전극계를 제작하였다. 또한 보이드는 원통형 모양의 알루미늄 틀을 제작하여 에폭시가 경화되는 과정에서 실린지를 삽입하고 공기를 주입하여 서로다른 직경을 가지는 4개의 시편을 제작하였다. 보이드 결함 크기 판별을 위해 부분방전 전하량, 방전 펄스 수, 위상 분포의 부분방전 특성 파라미터를 추출하여 Labview 기반의 VI (Virtual Instrument)로 역전파 알고리즘을 설계하였다. 실험 결과로부터 제작된 알고리즘은 90%이상의 판별률로 결함의 직경크기를 구분할 수 있었다. 본 연구의 결과는 현장에서 PD 측정 시 몰드변압기의 유지보수 및 절연물 교체의 근거 자료로 활용될 수 있을 것으로 판단된다.