• 대한한의학회지
• /
• 제18권2호
• /
• pp.340-354
• /
• 1997

Background : The stenosis of the coronary artery results in a decrease in the myocardial oxygen supply, ischemia and infarction. Jakamchotang as a drug of liquid is generally regarded to have the effect of arrythmia, palpitation from Heart disease and promoting the flow of Ki and Blood. Methods : The purpose of this experimental study is to find whether Jakamchotang is effective or not in curing ischemia in isolated perfused rat hearts and to measure the degree of its curing effect. In this study, under the Langendorff apparatus, ischemia was induced in isolated Sprague-Dawley rat hearts by ceasing the perfusion for 20 minites. Subjects were divided into a normal saline orally administered group(control group), an Jakamchotang orally 100mg administered group (sample A), an Jakamchotang orally 300mg administered group (sample B), and an Jakamchotang injection perfused group(sample C). The heart rates, left ventricular pressure, myocardial dilatation/contraction, cardiac perfusion flow and cardiac ezyme(LDH, CPK) of the four group were measured and compared in order to assess the influence of Jakamchotang on isolated perfused rat hearts recovering abillity from ischemia and infarction. results : 1. Heart rates were increased significantly in Jakamchotang orally 100mg administered group, Jakamchotang orally 300mg administered group and Jakamchotang injection perfused group on perfusion and reperfusion(p<0.01). 2. Left ventricular pressure were increased significantly in Jakamchotang orally 100mg administered group and 300mg administered and Jakamchotang injection perfused group(p<0.01) in comparison with control group on perfusion, but every group did not significant on reperfusion. 3. While there were no differances in each group's abillities of myocardial dilatation, the ability of myocardial constriction of Jakamchotang 100mg administered group only on perfusion was significantly greater than that of control group(p<0.05). 4. CBF was no significant on perfusion and reperfusion in comparison with control group(N.S.) 5. LDH was not significantly decreased on perfusion, but significactly decreased in Jakamchotang orally 100mg administered group, Jakamchotang orally 300mg administered group on reperfusion. 6. CPK was significantly decreased in Jakamchotang orally 100mg administered group, 300mg administered and Jakamchotang injection perfused group on perfusion(p<0.01), but was not significantly in Jakamchotang 300mg administered group only on reperfusion(P<0.05) Conclusion : According to the result above, Jakamchotang have an effect to recover in the isolated perfused rat hearts. Especially, the effect of Jakamchotang in orally adminstered group is greater than that of Jakamchotang injection perfused group on preischemia. The followings are the two important results of this study: First, the effect of Jakamchotang used traditionally on heart disease was proved statistcally under the Langendorff apparatus. Second, on the basis of this study, the effect of other type medications on myocardial ischemia can be evaluted in further studies.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.375-380
• /
• 2017

본 연구는 훈제 계란의 제조시간 단축과 진의 생성으로 발생하는 불량 훈제 계란을 감소시키기 위한 공정 조건 설정을 위한 목적으로 실시하였다. 진은 공정과정 중에 염지액의 과열 등으로 발생하는 난각의 얼룩으로 훈제 계란의 난각에 진이 발생할 경우 상품으로 사용할 수 없어 불량 처리하고 있다. 본 실험에 사용된 재료인 계란은 부산 오경농장에서 구입하여 대란만을 사용하였다. 제조 공정은 일반적인 훈제 계란 가공업체의 제조 공정을 참고로 작성하였다. 예비 실험을 통하여 훈제 계란의 최적 염도는 1.67~2.00%이었고, 훈제 계란의 진 발생으로 생성되는 불량 계란은 5%로 최적 염도의 조건과 3% 미만의 불량률을 목표로 하였다. 숙성 공정의 $50^{\circ}C$에서 96시간 숙성한 후, 훈제 계란을 가공하였을 때 진 발생은 0%였다. 순환식 침지방식은 8시간 처리하였을 때 제조한 훈제 계란의 염도는 1.67%였으며, 가압 방식은 $2.07kg/cm^2$의 압력으로 4시간 처리하였을 때 제조한 훈제 계란의 염도는 2.00%였다. 최적 효율의 압력을 찾기 위하여 0.52, 1.55, 1.86, 2.07, 2.38, 2.58, $3.62kg/cm^2$으로 처리하였을 때 $2.07kg/cm^2$의 압력 처리가 최적의 훈제 계란 염도와 2.2%의 진 발생률을 보였다. 숙성 및 가압 방식은 훈제 계란 가공 시 제조시간의 단축과 불량률을 감소시켜 줄 수 있는 기초가 될 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.61-75
• /
• 1997

The bond strengths of composite resin to tooth dentin vary with the methods of cavity preparation and surface treatment. Recent developments in techniques of dentinal surface treatment have renewed interest in microabrasive as a means of tooth preparation, The purpose of this study was to determine the effects of a new method of cavity preparation on the bond of composite resin to dentin. Freshly extracted 144 healthy human third molars were used in this study. The dentin surfaces prepared with #600 SiC abrasive paper were divided into control and air abrasion groups according to the method of dentin surface preparation using different combinations of delivery pressure, time, and acid etching. The shear bond strengths were measured after the composite resin (Clearfil Photo Bright) was bonded to prepared dentin surfaces by light-curing using a dentin bonding system (All-bond 2), In addition, the average surface roughness was measured to investigate the effect of differently prepared dentin surfaces on the shear bond strengths. The surface changes of prepared dentin and the debonded dentin surfaces were observed with SEM (S-2300, Hitachi Co., Japan). The following results from this-study were obtained ; 1. There was no significant difference of shear bond strengths according to the changes of delivery pressure and time. 2. The shear bond strengths were lower than the control in the air abraded-only groups, but those of the additional acid-etched groups were higher than the control. 3. The shear bond strengths to all air-abraded surfaces were increased by acid etching. 4. The correlation between shear bond strengths and surface roughness was not certain, although the mean surface roughness of all air-abraded surfaces has increased evidently while it has slightly decreased for additional acid etching. 5. On SEM examination, the dentinal tubules were almost occluded in the air abraded-only groups, but those were opened in the additional acid-etched groups. 6. The debonded surfaces were showed adhesive failure mode in the air abraded- only groups, while those were showed mainly the mixed and cohesive failure mode in the additional acid-etched groups. These results suggest that the layer produced during cavity preparation or surface treatment with air abrasion must be removed for maximum bond strength of composite resin to dentin.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.25-32
• /
• 2017

본 연구는 디스플레이 모듈 접합 공정에 적용하기 위해 자외선 경화형 아크릴계 점착제(PSA)에 실리카 나노 입자를 함량별로 첨가하여 실크 스크린 인쇄성 평가를 실시하였고, 유변학적 성질이 인쇄성 및 점착력에 미치는 영향을 고찰하고자 하였다. 점착제(PSA) 중합을 위한 기본 처방으로 2-ethylhexyl acrylate(2-EHA)와 acrylic acid(AA)를 93:7 비율로 고정하고 butyl acylate(BA), 2-hydroxyethyl acrylate(2-HEA)를 첨가하였다. 추가로 나노 입자는 친수성 및 소수성을 가지는 AEROSIL R974 및 AEROSIL 200을 각각 사용하였다. 나노 입자 함량이 4 또는 7 phr 이상 사용함에 따라 G', ${\eta}^*$ 값이 급격히 증가하였으며, 친수성 나노 입자 AEROSIL 200을 7 phr 이상 첨가했을 때에는 스크린 인쇄 시 투과성이 저하되었다. 점착력은 나노 입자 함량이 증가할수록 감소되는 경향을 보였으며, 친수성인 AEROSIL 200의 경우 점착력이 더욱 저하됨을 알 수 있었다.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• Composites Research
• /
• 제29권4호
• /
• pp.216-222
• /
• 2016

폴리디싸이클로팬타디엔 (p-DCPD) 수지를 경화하기 위해 개환반응이 사용된다. 이 반응은 텅스텐계 촉매를 이용한 반응이기 때문에 질소 조건에서 반응이 진행되어야 한다. 왜냐하면, 텅스텐계 수지는 촉매독 현상이 발생될 수 있기 때문에 대기조건에서는 사용이 어려운 것으로 알려져 있다. 이러한 문제를 개선하기 위해 본 연구에서는 대기 조건에서 텅스턴 (W)을 촉매로한 p-DCPD 대해 프레스 성형법을 이용하여 수지를 경화시켰다. 프레스 성형을 통해 p-DCPD (W) 수지를 경화시킬 경우 기계적 강도가 향상되는 결과를 얻었으며, 이는 DCPD 성형 단계에서 발생되는 기체를 압으로 눌러 미세 기공의 발생을 줄였기 때문이다. 촉매 독 현상이 발생되는 것은 반응시간이 길 때에 발생되지만, 짧은 성형을 시도하는 프레스 성형에서는 촉매 자체로 인한 물성 저하가 발생되지 않았다. 궁극적으로 p-DCPD 성형을 위해 대기 조건에서 성형이 가능하였으며, 경화 시간, 압력 변수를 조절할 경우 기계적 물성이 향상을 확인하였다.

• Journal of Nutrition and Health
• /
• 제12권1호
• /
• pp.51-58
• /
• 1979

It is a general trend everywhere that the uses of vegetable oils are increasing due to the fact that they are effective in curing and preventing symptoms of high blood pressure and various heart failure conditions. At the same time the concept that oxidative rancidity is caused by the oxidation of unsaturated fatty acid moieties whose subsequent decomposition gives rise to various undesirable, sometimes toxic compounds is now well accepted. Linolenic acid (C, 18:3) is one of highly unsaturated and readily oxidizable fatty acid. The content of this essential polyunsaturated fatty acid in perilla seed oil (PSO) was found to be as high as 48% while only 1.5% in sesame seed oil (SSO). In this experiment the oxidative stability of PSO was compared with that of SSO. The experimental test group were as follows: A) Stored at different temperatures, namely $4^{\circ}C,\;30^{\circ}C,$ and $60^{\circ}C,$ B) Stored at room temperature $(20{\pm}5^{\circ}C)$ ; a. protected from sunlight and air, b. exposed to air without sunlight c. exposed to sunlight but protected front air, d. completely exposed to both air and sunlight. The following results were obtained; 1) It was found to be most stable against oxidation to store both PSO and SSO under the low temperature $(4^{\circ}C)$ condition. According to P.V. measurements it was found to be safe to keep both oils up to $30^{\circ}C$ for at least 8 weeks. When exposed to air, sunlight and high temperature $(60^{\circ}C)$, P.V. of PSO reached there peak values, which were much higher than those of SSO. This explains much of its instability as compared to SSO against oxidation. 2) The effect of high temperature $(60^{\circ}C)$ on A.V. was found to be more striking than those of all the other storage conditions. The condition of refrigeration was most effective in keeping A.V. low for both oils as was the case in P.V. 3) For both oils, I.V. decreased throughout the experimental period (8 weeks). The range of decrement was larger for PSO than SSO. 4) There was no significant change in the compositions of fatty acids of SSO caused by various experimental storage conditions. But for PSO the compositions of stearic, oleic and linoleic acid were decreased, whereas linolenic acid was increased proportionally.

• 자원리싸이클링
• /
• 제21권3호
• /
• pp.39-47
• /
• 2012

고로슬래그(BFS) 경량기포콘크리트 제조의 최적 배합비를 도출하기 위해 반응표면분석법 중 하나인 Box-Behnken법을 이용하여 연구를 수행하였다. 경량기포콘크리트는 상압증기양생법으로 제조하였으며 주요 실험변수로는 물/분체($W/P_d$)비, BFS 치환률 그리고 분체량($P_d$) 기준 Al분말 첨가량을 설정하였다. 반응표면분석에 의해 경량기포콘크리트의 절건비중 및 압축강도에 대한 회귀 모델식이 유도되었다. 경량기포콘크리트의 절건비중과 압축강도에 대한 목표값을 각각 0.72와 4.42 MPa로 설정하고 회귀 모델식에 의해 도출된 경량기포콘크리트의 최적 배합비는 $W/P_d$비 0.62, BFS 치환률 35.5% 그리고 분체대비 Al분말 첨가량 0.05%이었다. 이처럼 도출된 배합비로 제조한 경량기포콘크리트 시험체에 대한 절건비중과 압축강도의 측정값을 통해 회귀 모델식의 신뢰성이 확인되었다.

• 유기물자원화
• /
• 제11권2호
• /
• pp.66-73
• /
• 2003

석유화학공장폐수 슬러지를 폐석고와 시멘트, fly ash 및 고화제 등을 배합하여 성형하면 시멘트벽돌 및 보통시멘트의 압축강도 기준을 초과함으로 제조된 고화체는 벽돌, 블록, 경량골재, 노반재 등으로 활용이 가능할 것으로 판단되었다. 실험 결과 다음의 결과를 얻었다. 시멘트량을 전체 중량비의 20%인 1.29kg에서 fly ash/슬러지의 배합비의 모든 조건과 시멘트량을 전체 중량비의 15%인 0.9kg에서 fly ash/슬러지의 배합비가 0.31~0.45일 때, 시멘트벽돌 및 보통시멘트의 압축강도 기준을 초과하였다. 제조된 고화체(제품)의 유해성 평가를 위해서 침출수 중의 $Cr^{+6}$, Cu, Zn, Cd, Pb의 용출농도를 실시한 결과 모든 대상시료의 중금속 농도는 배출허용기준치 이내를 유지하여 유해물질로 인한 문제는 없을 것으로 판단되었다. 고화체를 시멘트벽돌 및 보통시멘트에 준해서 활용이 가능한 제조조건에서 제조원가를 조사하였다. 조사결과 자원화시설의 고화체 제조능력을 연간 약 18,000톤을 기준으로 할 때, 총괄원가 및 톤당제조원가는 각각 678,664천원 및 37,704원으로 조사되었다.

• 비파괴검사학회지
• /
• 제15권1호
• /
• pp.277-290
• /
• 1995

본 연구는 $[0^{\circ}/90^{\circ}]_{2S}$와 $[0^{\circ}\;_2/90^{\circ}\;_2]_S$의 2종류 탄소섬유복합재료에 대한 인장 및 파괴인성 시험시의 파괴거동과 음향방출 특성을 해석하고 성형시의 성형압력과 인장강도 및 파괴인성 간의 상관성을 알아내기 위하여 수행되었다. AE신호는 음향방출장비를 이용하여 성형과정, 인장 및 파괴인성 시험중에 각각 검출하였다. 인장강도는 성형가압 단계수가 적을수록, 그리고 $[0^{\circ}/90^{\circ}]_{2S}$ 시험편 쪽이 $[0^{\circ}\;_2/90^{\circ}\;_2]_S$ 시험편보다 높은 강도를 나타내었다. 파괴인성은 동일한 온도영역에서 거의 같은 값을 나타내나 시험온도가 높아질수록 점차 낮아짐을 알 수 있었다. 한편 인장 및 파괴인성 시험시의 파괴거동과 AE신호간의 상관성을 조사하기 위하여 AE데이터의 AE변수들에 대한 후 신호처리(post processing)와 광학현미경 및 주사형 전자현미경 관찰이 각각 수행되었다.