• 한국연초학회지
• /
• 제29권2호
• /
• pp.74-79
• /
• 2007

This study was conducted to evaluate the prediction of sensory property of smoke from leaf chemical property and characterize leaf chemical components for the best tobacco taste's leaves in flue-cured tobacco. For analytical and sensory evaluations, one hundred and forty grades were used. The major leaf chemical components to predict the sensory property of smoke were nicotine for impact, irritation and off taste & odor, and total sugar/nicotine ratio for tobacco taste. Within ${\pm}20%$ range of difference, the predictable probabilities of sensory property of smoke form leaf chemical property were 80.0% for off taste & odor and $91.4{\sim}96.4%$ for impact, irritation and tobacco taste. As a result of K-means cluster analysis on the basis of tobacco taste, the desirable leaf chemical component contents were $2.77{\sim}3.55%$ in nicotine and $5.1{\sim}6.9$ in total sugar/nicotine ratio. This study suggest that the some regression equations may be useful to predict the sensory property of tobacco smoke from a few selected leaf chemical components in flue-cured tobacco and to select the flue-cured tobacco leaves for enhance the tobacco taste of cigarette.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4388-4397
• /
• 2015

이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.771-773
• /
• 1988

The Mechanical strength and the electrical insulation properties of the Epoxy Resin vary with the formation of chemical reactions between Epoxy and curing agent. Therefore, to study their reactions is important for understanding the properties of the cured Epoxy. In this paper, to get the cured Epoxy having good electrical insulation property, it is studied the effects of the surrounding temperature during the cure process on the property of the cured Epoxy. In the experiment, Epoxy is cured with the surrounding temperature varied between -5[$^{\circ}C$] to 50[$^{\circ}C$]. As the results, it follows that the higher the temperature is, the faster the cross-link process is.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.76-84
• /
• 2003

Stereolithography is the technique using a laser beam to cure a liquid resin, a photopolymer, with three dimensional computer-aided design (CAD) data. The build parameters of stereolithography such as beam size, scan velocity. hatch spacing, layer thickness and etc. are determined by the accuracy of prototype, the build time and the cured properties of the resin. In particular, beam size is important processing parameter fur the other parameters. Therefore, this study observed the cured property to beam size. For this purpose, according to hatch spacing and beam size, the cure width and depth were measured on single cured line. Also, the cure width and depth were measured at single cured layer As a result of experiments. cure depth which varied from 0.23mm to 0.34mm was directly proportioned to beam radius. on the other hand, cure width which varied from 0.42mm to 1.07mm was inversely proportioned to beam radius. Surface roughness varied from 1.12 to 2.23 m for the ratio of hatch spacing to beam radius.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.70-78
• /
• 2022

The trenchless entire repair technology (TERT) have many different names depending on the companies, and they have the same or similar methods as well as materials. In addition, there was quiet difficulty in application of field working and even confuse to classify for new TERT, while application criteria of TERT is not listed systematically. This study proposed standardization and method for TERT affecting by pipe condition, working materials, working method, specification/quantity per unit according to field condition, strange affairs and others. Determination criteria of defective sewer pipe has proposed to effective method which modify a criteria between Ministry of Environment and Seoul Metropolitan City. A Cured-in-place pipe (CIPP) is suitable for TERT, and the design criteria for the entire broken pipe are proposed when the pipe itself deforms more than 10%. A check lists are specimen preparing, hardening site made by clamped mold, numbers, flexural and tensile property, water leak and desquamation test, and have to use material property of minimum CIPP value depend on ISO 11296-4, ISO 11297-4, KS M3550-7 and KS M3550-9.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.165-169
• /
• 2014

Purpose: This study is a mechanical strength supplementation of denture base resin Polymethyl methacrylate (PMMA) is in general use for denture base resin of the partial and full denture, however, The polymerization process of PMMA is not stabilized. Because of compatibility problems, preceding studies were performed, which were enhancing mechanical strength(Camilo Machado 2007),(Ana M. 2008), addition filler to materials property(Ayse Mese, 2008), self curing method(Hiroshi Shimizu, 2008). Methods: The carbon fiber and polyacetal filler, reinforced the mechanical strength for improving the stability of denture base resin were supplemented to the self cured resin. The Modulus of elasticity and the restoring force were calculated by tensile test. Results: The strengths of the heat and self cured resin were respectively decreased and increased, when the filler was supplemented to the denture base resin and the modulus of elasticity of both heat and self cured resin were not increased, when the filler was supplemented to the denture base resin. Conclusion: The restoring forces of self cured resin containing 10% filler were increased, when the filler was supplemented to the denture base resin.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.67-74
• /
• 2018

Magneto-rheological elastomers (MREs) are smart materials in which the inherent stiffness and damping properties can be changed by the influence of an external magnetic field. The magneto-rheological (MR) effect depends on the orientation characteristics of the dispersed magneto-responsible particles (MRPs) in the matrix. In this study, natural rubber (NR) and ethylene propylene diene rubber (EPDM) were blended and used as a matrix of an MRE. EPDM was pre-cured before blending with NR. The Mooney viscosity, curing characteristics, and mechanical properties were analyzed with various pre-curing conditions of EPDM and the NR/EPDM blend. The results show that excellent mechanical properties of the NR/EPDM blend-based MRE were obtained when the pre-curing time of EPDM was 60 min. The aging property of the NR-based MRE was improved by the introduction of pre-cured EPDM. Also, the anisotropic MRE showed a higher MR effect than that of the isotropic MRE.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.147-150
• /
• 2004

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder (conductive filler) was mixed with an epoxy resin to impart electrical property in composites. The ratio of graphite powder was varied to investigate electrical property of cured conductive composites. In this study, graphite filled conductive polymer composites with high filler loadings$(>60wt.\%)$ were manufactured to accomplish high electrical conductivity(> 100S/cm). Graphite powder increase electrical conductivity of composites by direct physical contact between particles. While high filler loadings are needed to attain good electrical property, the composites becomes brittle. So the ratio of filler to epoxy was varied to optimize of cured composites. The optimum molding pressure according to filler was proposed experimentally.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.126-138
• /
• 1995

To investigate the changes of physicochemical properties of leaf tobacco during storage, cured leaves (both flue-cured(KF109) and burley(Burley 21) : 4 grades of leaves) were stored under the natural warehouse condition(room temperature) and processed leaves(both Rue-cured(NC82) and burly(Burley 21) : 6 grades of leaves) were stored at storerooms in tobacco processing plants(flue-cured Cheongju plant ; 2nd, 4th and 5th floor, burley : Kwangju plant ; 2nd floor, Chonju plant : 3rd and 5th floor). Tobacco leaves were sampled and analyzed every 3 months. Total sugar content of flue-cured leaf decreased slightly and the redness degree of leaf increased after 15 months' storage under the natural warehouse conditions. The pH of cured leaves were lowered both flue-cured and burley, and the decreasing rate of pH was large in flue-cured(0.24) as compared with burley(0.14). There was no significant differences of physicochemical properties of processed leaf among storerooms during 15 months' storage. The decreasing rate of processed leaf pH was somewhat large in flue-cured(0.26) as compared with burly (0.20), and in thick leaves as compared with thin leaves. The redness degree of flue-cured leaf increased slightly, while the degree of lightness and yellowness lowered slightly during storage. The lightness degree of burley leaf lowered slightly, too. The ageing process of cured leaf was similar to that of processed leaf, it is considered that the passing days after curing will be more reasonable than the passing days after processing for the establishment of proper ageing period.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.43-46
• /
• 1989

Epoxy, noticed as a new insulation material for electrical equipments, may become an excellent cured material from the crosslink reaction with some curing agents and accelerators. The characteristics of cured epoxy is determined by the method of lattice formation according to curing method. The purpose of this paper, varing the process of lattice formation by various surrounding temperatures and heating time during the curing process, is to obtain the optimum cured condition for electrical insulation from the results of investigation on the physical and dielectric properties of cured epoxy. In this investigation, it is found that the excessive temperature and heating time brings on the growth of metamorphic methyl and the insulating properties of cured epoxy is decreased by this phenomenon. As a result, it is concluded that the optimum dielectric characteristics can be obtained when cured at a curing temperature at 14$0^{\circ}C$ for one hour.