• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.4
• /
• pp.987-992
• /
• 2008

This study was carried out to understand the macroscopic aspects of the digestive system symptoms occurring after taking oriental herb complex decoction as observing morphological changes in esophagus, stomach and duodenal bulb by endoscopy of upper gastrointestinal tract when these symptoms developed. The subjects of this study were 46 patients (male 22, female 24, mean age : $54.72{\pm}14.26$ years) who were chosen among ones who took oriental herb complex decoction for medical care and developed symptoms related to the gastrointestinal tract while taking an oriental herb decoction, which were assumed that the digestive symptoms were newly developed because of administration. The subjects were given morphological examination by endoscopy of the upper gastrointestinal tract. As a result of the endoscopy operated due to the digestive symptoms developed during the administration of oriental herb decoction, there were 2 cases of esophagitis, 5 cases of acute gastritis, 1 case of chronic gastritis A type, 15 cases of chronic gastritis B type, 1 case of duodenitis, 1 case of gastric ulcer, 1 case of gastric polyp, 2 cases of intestinal metaplasia, 1 case of gastric ptosis and 17 cases of normal findings which didn't have any abnormality macroscopically with endoscopy. With regards to the patients who complained of the digestive symptoms after taking oriental herb decoction, it has been found that the symptoms occurred as the oriental herbal medicine taken by the patients who had the digestive symptoms at ordinary times influenced on the gastrointestinal tract. Especially, many of them were had chronic gastritis and functional dyspepsia in the past. The disease accompanying macroscopic lesions at endoscopy which occurred due to the oriental herb decoction as direct cause, was acute gastritis, and it was the prescription to cure the pains and inflammations of skeletomuscular disease.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1214-1218
• /
• 2005

As demands for precision parts are increased, existing methods to fabricate them such as MEMS, LIGA technology have the technical limitations like high precision, high functionality and ultra miniaturization. A micro-stereolithography technology based on $DMD^{TM}$(Digital Micromirror Device) can meet these demands. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D part is fabricated by stacking layers that are sliced as 2D section from STL file. Whereas in conventional method, the resin surface is cured as scanning laser beam spot according to the section shape, but in this research, we use integral process which enables to cure the resin surface at one time. In this paper, we deal with the dynamic pattern generation and $DMD^{TM}$ operation to fabricate micro structures. Firstly, we address effective slicing method of STL file, conversion to bitmap, and dynamic pattern generation. Secondly, we suggest $DMD^{TM}$ operation and optimal support manufacturing for $DMD^{TM}$ mounting. Thirdly, we examine the problems on continuous stacking layers, and their improvements in software aspects.

• The Journal of Internal Korean Medicine
• /
• v.18 no.1
• /
• pp.156-174
• /
• 1997

This study is investigation of clinical statistics toward to old patients of 164 persons over full 65 years old to go to hospital in 5 internal medicine department of the Dongguk University Oriental Medicine Hospital for full one year from 1995. 8 to 1996. 7. The results are followings ; 1. The ratio of male and female was 1:1.6, and in offspring figures five persons or more(60.3%) was most. A couple(32.3%) was extremely much in residing forms, but in accordance to sexual distinction in male a couple(51.7%), in female solitude(31.0%) and an eldest son couple(30.0%) was far much. 2. An attack time, first cure was most in western hospital(59.2%), 81.1% of them desired western-oriental medicine cooperation, in a medical fee charging, themselves(50.7%) were far much, and most were affirmative(76.8%) against aging prevention of restorative. 3. Main diseases were cerebral nerve(41.5%) and circulatory system(25.6%), hypertention (23.8%, 9.8%) was most in complication and the past. In defecation constipation(31.7%), in urination frequence(46.7%) was far much. 4. In preventive measures of diseases invigorant(25.6%) and nothing(24.3%) was far much and in a person tending the sick a mate in male(16.7%), a son in female(13.0%) was extremely much. 5. In sexual life most of(91.5%) didn't act, a mate death was 53.1% and female was far much. And paralysis attack was extremely much in 65-74 years old(76.5%).

• The Journal of Korean Medicine
• /
• v.21 no.4
• /
• pp.16-25
• /
• 2000

Objective : Acupuncture and Radix Astragali aqua-acupuncture stimuli have long been used to cure human diseases. However, the exact physiological and biochemical mechanisms involved remain undiscovered. Thus, many attempts have been made to show the scientific mechanisms involved. The effects of acupuncture and Radix Astragali aqua-acupuncture, which was known to date, as follow; effective circulation of body blood system and proliferation of leucocytes. Methods : In this study, we have applied acupuncture and Radix Astragali aqua-acupuncture stimuli to mouse on Sinsuhyul, a stimulative point of oriental medicine, to see effects on the expression of cytokine $IL-1{\beta}$. Mice were treated with lipopolysaccharide(LPS) for inflammation induction and then reverse transcriptase-polymerase chain reaction (RT-PCR) using each primer set were performed to trace the amounts of mRNA. Results : 1. $IL-1{\beta}$ was not expressed in LPS-nontreated mice at 15 to 60 min after acupuncture-stimuli. However, expression occurred after 3hrs. 2. $IL-1{\beta}$ was specifically expressed in LPS-treated mice at 30 min after acupuncture-stimuli. 3. $IL-1{\beta}$ was expressed in LPS-nontreated mice at 30 min after Radix Astragali aqua-acupuncture stimuli, however, not expressed at 60, 180 min. 4. $IL-1{\beta}$ was gradually expressed in LPS-treated mice at 15 to 180 min after Radix Astragali aqua-acupuncture stimuli. Conclusions : $IL-1{\beta}$ in LPS-treated mice was more effective than that of LPS-nontreated mice. We are now in the process of elucidating the immunological action mechanism of acupuncture and Radix Astragali aqua-acupuncture stimuli. And cytokine $IL-1{\beta}$ can be used not only as a basis of the effects of acupuncture and Radix Astragali aqua-acupuncture but also as a diagnosis guide through the immunological actions of those.

• Journal of Korean Medical classics
• /
• v.19 no.3
• /
• pp.228-254
• /
• 2006

1. King Hyeonjong(1641-1674) mainly suffered from eye disease and abscess. He specially took a hot spring bath for cure of eye and skin problems. He probably died of septicemia and the following gastro-intestinal infection at the age of 34, quite early for his age. 2. King Sukjong(1661-1720) was not very well all through his life, but lived quite longer than other Kings in the Joseon Dynasty. He suffered from various diseases like heart-based heat, abscess, edema, upper respiratory infections, etc. He frequently took the treatments of acupuncture and moxibustion. He presumably died of dysfunction of liver and kidney at the age of 60. 3. King Gyeongjong(1688-1724) suffered from political problems from birth to death, so he may have had excessive mental stress for his poor health. He mainly suffered from heart-based heat and abscess. It is quite not sure why he died in only one month from the onset of his symptoms, so many people thought that he was poisoned to death. He probably died of septicemia and the following gastro-intestinal infection at the age of 37. 4. King Yeongjo(1694-1776) lived for 83 years, which is the longest of all the Kings in the Joseon Dynasty. He mainly suffered from hypofunction of gastro-intestinal system with cold symptoms, coughs, uneasiness. He took various kinds of herbal medicine, of which he took ginseng the most. He is supposed to be dead due to his old age at 83.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6464-6471
• /
• 2014

The UV curing method is a popular process for lens molding on a unit wafer. This process, however, has several drawbacks including wafer adhesion during the ejection process after curing, errors in lens shape and wafer warpage due to material shrinkage during the curing process, and lens centering errors on both sides of a wafer. Among these, the lens shape error and warpage are influenced directly by the UV curing process due to factors including the UV radiation uniformity, the degree of cure according to UV intensity, and the shrinkage characteristics of the material. Therefore, a theory is needed not only to understand the change in the material characteristics, such as the shrinkage rate due to the curing reaction, but also to establish a model. In addition, an analysis system is needed to realize the model. This study proposes a new analysis method for the wafer lens molding process by Comsol modeling. This method was verified by comparing the results with those of the actual process.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.268-274
• /
• 2012

The silane coupling agent, 3-(trimethoxysilyl)propyl methacrylate (${\gamma}$-MPTS), was grafted on the surface of alumina nanoparticles. We used the surface modified nanoparticles in the hard coating layer for in-mold decoration (IMD) foils and evaluated the coating properties such as hardness and anti-abrasion property. The effects of electron beam (EB) irradiation on color layer and anchor layer of IMD foils were observed through the difference in color and the cross-cut tape test, respectively. Also, cure kinetics as studied quantitatively under various reaction temperatures by analysis of surface properties and Fourier transform infrared (FTIR) spectroscopy. From these results, we constructed database for the commercial exploitation of EB curing system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4577-4581
• /
• 2015

Background: To explore the hospitalizations of breast cancer patients undergoing mastectomy, and to provide a basis for management, clinical prevention and treatment. Materials and Methods: We conducted an investigation by means of the retrospective survey and the medical records retrieval system, and made out the data of patients suffered from breast cancer in a hospital in Guangzhou from 2004 to 2013, including age, medical payment methods, pathological type, treatment, treatment results, complications, hospitalization days, cost and so on. Results: The average age of the inpatients was 50.14 years old. The main histologic types were infiltrating duct carcinoma (88.06%). The main surgery was modified radical mastectomy (80.41%). The cure rate was 90.80% during the 10 years. The main medical payment method was self-paying (57.28%). The average hospital stay was 13.51 days, and average hospitalization cost was RMB 23,083.66 yuan, proportion of drug fees up to 39.70%. Postoperative complication rate was 0.79%. The self-paying group was with the highest proportion of drug fees (P<0.05), while the free medical service group was with the longest hospitalization days (P<0.05). Conclusions: The payment methods significantly affected the proportion of drug fees and hospitalization days. The therapeutic effect was satisfactory with less complications and reasonable proportion of drug fees in our hospital.

• Corrosion Science and Technology
• /
• v.2 no.4
• /
• pp.202-206
• /
• 2003

Fusion Bonded Epoxy(FBE) systems have been widely used to protect pipelines for over 30 years. Numerous attempts have so far been made to improve the properties of FBE coatings such as chemical resistance, adhesion, water resistance, cathodic disbondment resistance, impact resistance, and flexibility to protect pipelines at a wet and a high temperature condition. But these attempts have not been successful in reducing some weakness, for instance, in pipeline operating at high temperature due to poor hot water resistance and cathodic protection. The purpose here is to build a basis for getting better corrosion resistance of FBE systems. Cresol-novolac epoxy coating systems were studied compared to bisphenol A type epoxy systems. After the immersion of the film in water at a high temperature for a long period, good adhesion to metal substrate and excellent cathodic disbond resistance were observed in the cresol-novolac epoxy resin systems. It is well known that the adhesion of organic coatings to metal substrate might be decreased due to the disruption of a chemical bond across the film and metal interface induced by water molecules. A high crosslinking density might decrease water permeability and improve cathodic disbonding protection in the coatings. Other factors are studied to understand anti-corrosion mechanism of Cresol-novolac epoxy coatings. In addition, the water absorption rate and the effect of cure temperature on the adhesion and cathodic disbonding resistance ofthe films were studied in different epoxy coatings and the effect of substrate was evaluated. The results of field application are proved that the Cresol-novolac epoxy coating system developed recently is one of the most suitable coatings for protection of pipelines.