• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.20-26
• /
• 1998

100％ viscose rayon fabric was treated with 1,2,3,4-butanetetracarboxylic acid (BTCA) by pad-dry-cure process in the presence of various catalysts. The dimensional stability, mechanical properties and hand values of fabric treated with BTCA were investigated. The ester-crosslinking reaction was influenced by the concentration of BTCA and type of catalyst. The fabric treated with BTCA was comparable or superior to that treated with conventional crosslinking agents such as dimethyloldihydroxyethyleneurea and 4,5-dihydroxy-1,3-dimethyl-2-imidazolidinone in respect of wrinkle recovery, shrinkproof property, retention of strength, and hand values. But in yellowing of fabric, the fabric treated with BTCA was inferior to that treated with conventional crosslinking agents. The fabric treated with BTCA/sodium formate was inferior to that treated with BTCA/sodium hypophosphite in respect of WRA, but had better strength retention and whiteness.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.45-52
• /
• 2006

Five low molar ratio urea-formaldehyde (LUF) resins were synthesized in this study. The effects of molar ratio, free formaldehyde content, and catalysts on the curing characteristics of LUF resins were studied by measuring its free formaldehyde content, pH value change after catalysts added, curing rate, and pot life, observing its cured appearance, and analyzing its thermal behavior. The results indicate that: 1) The LUF resin with lower molar ratio than 1.0 can still cure; 2) Free formaldehyde content is not the main factor in affecting curing rate of LUF resin; 3) Compared with ammonium chloride as a traditional catalyst, persulfate salts markedly accelerate the curing rate of LUF resin, and result in the different appearance; 4) the addition of sodium chloride to catalysts can accelerate the curing rate of LUF resin, but the effect is moderate.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.23-26
• /
• 2012

The monodispersed polystyrene spheres were prepared by emulsion polymerization in aqueous alcohol system. They coated with silver by reduction of silver ion percolated on the surface of them. The spherical hollow type silver has been prepared by dissolving polystyrene with toluene. Epoxy resin compositions with spherical hollow type silver were manufactured, which were composed of a bisphenol F type epoxy resin (RE-304S), amine type hardener (Kayahard AA), and 1-benzyl 2-methyl imidazole (1B2MI) as catalyst. The electrical conductivity with silver content ratio were investigated after cure, the percolation threshold weight ratio for conductance in this epoxy resin system was obtained above the 70 wt% of silver.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.35-60
• /
• 1997

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc, depend on the degree of conversion of the resin components. The clinical behavior of restorative resins varies brand to brand. Part of this variation is associated with the filler and differences in the polymer matrix. The polymer matrix of resins may differ because the involved monomers are dissimilar and because of variation in the catalyst system. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the depth of cure and light curing time. 7mm diameter cylindrical aluminum molds were filled with each of five different hybrid light curing composite resins(Z-100, Charisma, Herculite XRV, Prisma TPH, Veridonfil) on the thin resin films. The molds were 1mm, 2mm, 3mm, 4mm, and 5mm in depth to produce resin films of various heights. Each sample was given 20sec, 40sec, and 60sec illumination with a light source. The degree of conversion of carbon double bonds to single bonds in the resin films was examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows; 1. There was difference in the degree of conversion among five light curing composite resins according to the depth of cure for 20sec, 40sec, and 60sec illumination with light source with statistical significance(P<0.05). 2. Five light curing composite resins show lower degree of conversion at surface of the resin than depth of 1mm. 3. The degree of conversion of five light curing composite resins was siginificantly reduced from the maximum for the resin film when the light passed through as little as 1mm of each composite. 4. The degree of conversion of five light curing composite resins decrease significantly at the depth of 4mm, and polymerization was not occured at the depth of 5mm except for Prisma TPH. 5. The degree of conversion of five light curing composite resins was increased with increased light curing time, and there was no significant differences in the degree of conversion above 4mm in Z-100, 3mm in Charisma, and at depth of 5mm in Herculite XRV and Veridonfil(P>0.05).

• 폴리머
• /
• 제25권2호
• /
• pp.168-176
• /
• 2001

새로운 열잠재성 개시제로서 N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroan-timonate (CMH) 촉매가 diglycidylether of bisphenol A (DGEBA) 에폭시 양이온 중합계의 열적, 유변학적 특성 및 열정성에 미치는 영향에 대해 연구하였다. DSC에 의한 DGEBA/CMH 경화계의 열분석 결과, 본 경화계는 일정 온도까지 우수한 잠재성을 지닌 반응 기구임을 확인할 수 있었으며, 특히 개시제의 함량이 증가할수록 CMH의 높은 활성에 의해 DGEBA의 전환율 및 경화반응 속도가 증가하였다. 유변학적 특성은 레오미터를 사용하여 등온 조건 하, 저장 탄성율(G'), 손실 탄성율(G") 그리고 damping factor (tan $\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 실험 결과 경화 온도 및 CMH의 증가에 따른 활성의 차이로 인하여 에폭시 양이온 중합의 네트워크 구조 형성에 영향을 미쳐 겔화 시간이 단축됨을 알 수 있었다. 형성된 네트워크 구조의 열안정성은 TGA 분석을 통해 분해 활성화 에너지 및 열안정성 인자 등의 측정으로 고찰하였다.찰하였다.

• 한국정보통신학회논문지
• /
• 제15권12호
• /
• pp.2575-2581
• /
• 2011

최근에 이르러 뇌에 대한 연구가 체계적으로 이루어지고 있으며 뇌파를 활용하기 위한 Brain-Computer Interface(BCI) 기술에 대한 연구가 활발히 진행되고 있다. 특히, BCI 기기를 활용한 기능성 게임 기술이 관심의 대상이 되고 있다. 본 논문에서는 미국 뉴로 스카이사의 마인드셋 SDK(System Development Kit)를 이용하여 집중도과평정도에 따라 협동심과 사회성을 길러주는 기능성 게임으로 기존의 1인용 게임과 차별을 둔 "2인용 협동 댄스게임" 구현을 제안한다. 이 게임은 일반인의 뇌 활성화 및 ADHD 아동과 경도인지장애를 보이는 노인 치료에 도움을 주고 청소년들의 게임문화에 대한 사회적 순기능 역할을 할 것으로 기대한다.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.242-251
• /
• 1989

The purpose of this study was to investigate the changes in easy-care and strength properties of the wet fixation processed viscose rayon fabrics. Rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100, 100/150 and 150/100(g/1). Magnasium chloride was used as a catalyst. Treated fabrics were evaluated by nitrogen content, DP rating, wrinkle recovery angle, breaking strength, tearing strength and abrasion resistance. The properties were compared to the fabrics treated by conventional Pad-Dry-Cure (PDC) method. Wet fixation processed fabrics showed DP ratings of higher than 3 and higher than 275 degrees of wrinkle recovery angles in all the mixed resin concentrations. Wet fixation processed fabrics showed increase in breaking strength and tearing strength but decrease in abrasion resistance. However, the decrease in abrasion resistance was much less than the conventional PDC treated fabrics. The one bath wet fixation processed fabrics showed better physical properties than the two bath processed fabrics in general. The optimum treatment condition was the mixed resin concentration of MF/DMDHEU, 100/100 g/l in one bath wet fixation process.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.39-44
• /
• 2006

A new kind of silicone-epoxy composite is reported in this research. The silicone-epoxy resin was synthesized by the hydrosilylation of tetramethycyclotetrasiloxane and 4-vinyl-1-cyclohexene 1,2-epoxy with a high reaction yield. It was found that the obtained silicone-epoxy resin shows a high reactive activity to the aluminum complex-silanol catalyst. The resin could be cured under the catalysis of $(Al(acac)_3/Ph_2Si(OH)_2$ at a concentration below 0.1 wt% to give a hard cured resin showing excellent optical clarity, UV resistance and thermal stability. It was also found that the Si-H groups facilitated the curing reaction and the silicone-epoxy resin bearing Si-H group could be cured effectively even if $Ph_2Si(OH)_2h$ was absent. Moreover, the UV resistance and thermal stability were improved significantly by the introduction of Si-H groups. This is possibly due to the reductive property of Si-H groups which can annihilate radical and peroxide effectively. This kind of silicone-containing epoxy composite might have very promising applications as optical resin, optical adhesive and encapsulation materials for electronic devices.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.30-41
• /
• 1997

A purpose of this research is to prove unknown relation -ship between finish bath pH and crosslinking. In pursuit of these goals, we have treated 100% cotton broad cloth with PTCA and BTCA at different pH values. They were used with H$_{3}$PO$_{4}$, NaH$_{2}$PO$_{2}$, NaH$_{2}$PO$_{4}$, Na$_{2}$HPO$_{4}$, Na$_{3}$PO$_{4}$, catalysts to produce nonformaldehyde fabrics finishes. Treatments were applied to all cotton fabrics using a parletry-cure process. For the fully understood on the relationship of finish bath pH effect and cotton cellulose esterification, the relative concentrations of chemical species were calculated from ionization constants. The effect of pH on the cotton cellulose ester was investigated using Fourier transform infrared spectra, the surface area measurement by BET method and wrinkle recovery analysis. Results of differential FT-IR spectra and their relative concentration analysis were compared with those of catalyst treated controls. FT-IR and wrinkle recovery data indicated that the esterfication by polycarboxylic acids is pridependent. A similar phenomenon also occurred when a phosphate or hypophosphite was used. Therefore, it is necessary to choose the optimum pH range of a finishing bath in order to achieve the most effective esterification.

• 접착 및 계면
• /
• 제5권1호
• /
• pp.3-11
• /
• 2004

본 연구에서는 DSC와 DMA를 이용하여 잠재성 양이온 개시제인 BPH에 의해 개시된 DGEBA/PMR-15 블렌드계의 경화거동에 대해 연구하였다. 본 블렌드계의 열안정성과 기계적 계면 특성은 TGA 분석과 임계 응력 세기 인자($K_{IC}$) 측정을 통하여 고찰하였다. 본 실험 결과, DSC 측정을 통하여 Ozawa 방정식으로부터 구한 경화 활성화 에너지($E_a$)와 DMA 측정을 통하여 구한 relaxation 활성화 에너지($E_r$)는 PMR-15의 함량이 증가함에 따라 증가하는 것을 알 수 있었다. 적분 열분해 온도(IPDT)와 유리전이온도($T_g$)로 알아본 열안정성은 PMR-15의 우수한 내열성으로 인해 PMR-15의 함량이 증가함에 따라 크게 증가하였다. 기계적 계면 특성인 $K_{IC}$ 또한 경화 활성화 에너지와 같은 경향을 나타내는 것을 알 수 있었는데, 이는 블렌드계의 분자들간의 수소 결합 또는 계면 결합력이 증가되었기 때문인 것으로 사료된다.