• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.14-20
• /
• 1990

The cotton fabrics were treated with formaldehyde in the presence of zinc nitrate catalyst and urea. The effects of HCHO concentration, urea concentration, catalyst ratio, cure time and cure temperature on the physical properties of fabrics were studied. Cotton fabric finished with HCHO and urea had the lower tensile strength and tear strength than untreated one. These strength losses resulted from tighter oxymethylene crosslinks. The enhanced wrinkle recovery for fabric treated with formaldehyde in the presence of urea was indicative of the formation of urea-formaldehyde polymer. These experimental conditions were set up according to table of orthogonal arrays.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.478-483
• /
• 2004

Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB)] as self-healing agents for polymeric composites were microencapsuled by in situ polymerization of urea and formaldehyde. We obtained plots of the storage modulus (G') and tan $\delta$ as a function of cure time by using dynamic mechanical analysis to investigate the cure behavior of the unreacted self-healing agent mixture in the presence of a catalyst. Glass transition temperatures (T$\_$g/) and exothermic reactions of samples cured for 5 and 120 min in the presence of different amounts of the catalyst were analyzed by differential scanning calorimetry. Of the two dienes, ENB may have advantages as a self-healing agent because, when cured under same conditions as DCPD, it reacts much faster in the presence of a much lower amount of catalyst, has no melting point, and produces a resin that has a higher value of T$\_$g/. Microcapsules containing the healing agent were successfully formed from both of the diene monomers and were characterized by thermogravimetric analysis. Optical microscopy and a particle size analyzer were employed to observe the morphology and size distribution, respectively, of the microcapsules. The microcapsules exhibited similar thermal properties as well as particle shapes and sizes.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.471-476
• /
• 2008

The thermal and mechanical properties and morphology of epoxy/polyamide/DDS/2E4MZ-CNS reactive blends with various amounts of polyamide were investigated. The amount of polyamide was 10, 20, and 30 phr and 2 phr of catalyst was added to the blend to cure at $180^{\circ}C$ for 30 min. By adding the catalyst, 2E4MZ-CNS, to the blend, the cure reaction occurred at a lower temperature. From the SEM images, it was found that the boundary of separated-phase was unclear and the phase was co-continuous. Without the catalyst, however, the boundary of separated-phase was clear. The control of cure temperature and morphology could be achieved by using a proper catalyst and consequently the mechanical strength increased by 20% compared to the blend without the catalyst due to the strong interaction between epoxy matrix and phase-separated polyamide at the interface.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.233-240
• /
• 2002

In this work, the cure kinetics and rheological and mechanical properties of diglycidylether of bispheonol A (DGEBA, EP)/polyurethane (PU) blends were investigated. The 1 wt% N-benzylpyrazinium hexafluoroantiminate (BPH) was used as a latent thermal catalyst. Latent properties were performed by measurement of the conversion as a function of reaction temperature using DSC. And the rheological properties of the blend systems were investigated under isothermal conditions using a rheometer. Crosslinking activating energies (Ec) were also determined from the Arrhenius equation based on gel time and curing temperature. The impact strengths were measured as mechanical properties of the casting specimens. The BPH in the blend systems could be an excellent latent thermal catalyst without any co-initiator. The rheological results showed that Ec was highest when PU content was 30 wt% which was in good agreement with the impact strengths. This was probably due to the intermolecular hydrogen bonding between the hydroxyl group in PU and EP, resulting in increasing the crosslinking density.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1199-1203
• /
• 1997

The investigation of cure kinetics of biphenyl epoxy (4,4-diglycidyloxy-3,3,5,5-tetramethyl biphenyl)-xylok resin system with four different catalysts was performed by differential scanning calorimeter using an isothermal approach. All kinetic parameters of the curing reaction including the reaction order, activation energy and rate constant were calculated and reported. The results indicate that the curing reaction of the formulations using triphenylphosphine (TPP) and 1-benzyl-2-methylimidazole (1B2MI) as a catalyst proceeds through a first order kinetic mechanism, whereas that of the formulations using diazabicyloundecene (DBU) and tetraphenyl phosphonium tetraphenyl borate (TPP-TPB) proceeds by an autocatalytic kinetic mechanism. To describe the cure reaction in the latter stage, we have used the semiempirical relationship proposed by Chern and Poehlein. By combining an nth order kinetic model or an autocatalytic model with a diffusion factor, it is possible to predict the cure kinetics of each catalytic system over the whole range of conversion.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.727-732
• /
• 2001

The cure kinetics of diglycidyl ether of bisphenol A (DGEBA)/4,4'- methylene dianiline (MDA) system with synthesized phenyl glycidyl ether-dimethylurea (PGE-DMU) was studied by Kissinger and Ozawa equations with DSC analysis in the temperature range of $20~300^{\circ}C$ To investigate the reaction mechanism between epoxy group of PGE and urea group of DMU, FT-lR spectroscopy analysis was used. The epoxide group of PGE reacted with the urea group of DMU and formed a hydroxyl group which acted as a catalyst on the cure reaction of other epoxide and amine groups. The activation energy of DGEBA/MDA system without PGE-DMU was 46.5 kJ/mol and those of the system with 5 and 10 phr of PGE- DMU were 43.4 and 37.0 kJ/mol, respectively. Ozawa method also showed the same tendency.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.667-672
• /
• 1995

Cure kinetics of DGEBA(diglycidyl ether of bisphenol A)/MDA(4, 4'-methylene dianiline)/SN(succinonitrile) system and DGEBA/MDA/SN/HQ(hydroquinone) system was studied by Kissinger equation and Fractional life method through DSC in the temperature range of 85∼150$^{\circ}C$. As cure temperature was increased, reaction rate increased and reaction order was almost constant. The reaction rate of the system with HQ as a catalyst was more higher and activation energy of that was lower about 20% than those of the system without HQ. Starting temperature of cure reaction for DGEBA/MDA/SN/HQ system decreased about 30$^{\circ}C$ than that of DGEBA/MDA/SN system.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1046-1051
• /
• 1999

Cure behavior and thermal stability of the different ratio of diglycidylether of bisphenol A(DGEBA)/trimethylolpropane triglycidylether(TMP) epoxy blends initiated by 1 wt % N-benzylpyrazinium hexafluoroantimonate (BPH) as a cationic latent catalyst were studied using DSC and TGA, respectively. Latent properties were performed by measurement of the conversion as a function of temperature using dynamic DSC. Dynamic DSC thermograms of DGEBA/TMP blends revealed that the weak peak was formed by complex formation between the hydroxyl groups in DGEBA and BPH, and between epoxides and BPH in low temperature ranges. The strong peak was considered as an exothermic reaction by the formation of three-dimensional network in high temperature ranges. Isothermal DSC revealed that the reaction rate of the blends was found to be higher than that of the neat TMP. The thermal stabilities in the cured resins were increased with increasing the DGEBA content. These results could be interpreted in terms of the stable aromatic structure, existence of hydroxyl group and high molecular weight of DGEBA.

• Composites Research
• /
• v.17 no.5
• /
• pp.47-53
• /
• 2004

In this work, two thermal latent catalysts, i.e., N-benzylpyrazinium hexafluoroantimonate (BPH) and benzyl-2,5-dimethylpyrazinium hexafluoroantimonate (BDPH), were synthesized. The cure behaviors and thermal stabilities of diglycidylether of bisphenol A (DCEBA) epoxy resins initiated by 1 wt.% of the catalysts were investigated by DSC, NIR, TCA, and DMA Latent properties of the catalysts were examined by conversion of epoxy resins using NIR from $100^{\circ}C$ to $180^{\circ}C$ From the resultes of near-IR, DGEBA/BPH system showed higher conversion than that of DGEBA/BDPH system. The thermal stabilities of DGEBA/BDPH system based on the initial decomposition temperature (IDT) and integral procedural decomposition (IPDT) were relatively lower than those of DCEBA/BPH system. These could be attributed to the hindered structure of BDPH, resulting in decreasing the thermal stability in the DGEBA/BDPH system.