• 제목/요약/키워드: Cupric salts

검색결과 9건 처리시간 0.016초

동 및 철이온이 MMA/TBBO레진의 상아질 접착에 미치는 영향 (EFFECT OF CUPRIC AND FERRIC IONS ON BONDING OF MMA/TBBO RESIN TO DENTIN)

  • 박진훈
    • Restorative Dentistry and Endodontics
    • /
    • 제18권2호
    • /
    • pp.423-430
    • /
    • 1993
  • The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

  • PDF

수계 바인더를 이용한 W-Cu 합금의 새로운 사출성형법 연구 (A new Aqueous Injection Molding Method of Fabricating W-Cu Pseudo-alloy Part)

  • 이정근
    • 한국분말재료학회지
    • /
    • 제13권1호
    • /
    • pp.57-61
    • /
    • 2006
  • The present work illustrates the use of water-soluble cupric salts as ingredients of binder for injection molding of $W-10 wt\%$ Cu. Parts produced are dense, homogeneous and have good surface finish, compared to those produced using conventional binder system. This new binder system provides also process-simplification benefit. $CuCl_2\;and\;Cu(NO_3)_2$ with the purity of $98\%$ was selected for this study. Rapid sintering process involving thermal decomposing was successful in densification for 1h. Final density that is about $93\%$ of theoretical value could be obtained, and are distinguishable from conventionally processed W-Cu composites.

Pyrazole과 Pyrazolotriazole 유도체의 합성 및 특성 연구 (Synthesis, Fastness and Spectral Properties of Some New Azo Pyrazole and Pyrazolotriazole Derivatives)

  • Rizk, Hala F.;El-Badawi, Mahmoud A.;Ibrahim, Seham A.;El-Borai, Mohamed A.
    • 대한화학회지
    • /
    • 제54권6호
    • /
    • pp.737-743
    • /
    • 2010
  • 5-Amino-1,3-diaryl-pyrazoles 1a-c 와 다양한 aryl amine의diazonium salts를 반응시켜서 1,3-diaryl-5-amino-4-arylazopyrazoles 3a-l을 합성하였으며, 몇 가지 화합물은 5-amino-1,3-diaryl-4-nitroso-1H-pyrazoles 2a-c와 aryl amine의 diazonium salts를 반응시켜서 얻었다. 합성한 azo 유도체 화합물 3a-l을 DMF 용매 속에서 cupric acetate와 산화반응시켜서 2,4,6-triaryl-2,4-dihydropyrazolo [4,3-d]-1,2,3-triazoles 4a-l을 합성하였으며, 합성한 cyclic triazoles에 대한 형광 특성을 측정하였다. 한편, Diazotization of sodium nitrite/ortho-phosphoric acid 조건에서 5-amino-1,3-diaryl-1H-pyrazoles 1a-c를 diazotization화 반응시킨 다음에, aryl amines과 반응시켜서 o-aminoazo compounds 5a-f를 합성하였다. 합성한 화합물 5a-f를 pyridine/cupric acetate 반응 조건에서 반응시켜서 triazole 6a-f들을 합성하였으며, 얻어진 화합물 6a-f을 aryl diazonium salts과 반응시켜서 화합물 7a-j을 합성하였다. 합성한 염료 화합물을 polyesters에 분산염료와 정착성을 측정하였다.

Utilization of Bamboo Leaves as a New Resource of Natural Green Colorants

  • Shin, Younsook;Cho, Arang;Yoo, Dong Il
    • 한국염색가공학회지
    • /
    • 제24권4호
    • /
    • pp.247-252
    • /
    • 2012
  • The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

양배추 Peroxidase의 포도당 분석에의 이용 (Application of cabbage Peroxidase for Glucose Assay)

  • 박인식;고선옥;남인
    • 한국식품영양과학회지
    • /
    • 제19권3호
    • /
    • pp.224-228
    • /
    • 1990
  • Cabbage contained high peroxidase activity among tested plant sources. The cabbage peroxi-dase can replace horseradish peroxidase to assay glucose with glucose oxidase. The amount of glucose can be determined quantitatively by glucose oxidase-cabbage peroxidase. The opti-mum pH and temperature for enzymatic glucose determination by glucose oxidase-cabbage peroxidase were 6.0 and 35-45$^{\circ}C$ respectively. The glucose assay was inhibited by addition of various metal salts such as mercuric chloride lead acetate silver nitrate ammonium molyb-date sodium tunstate and cupric sulfate. The relationship between absorbance and amount of glucose was linear up to 8.33 mM glucose in the assay mixture under the assay conditions.

  • PDF

Radiation Induced-Grafting of Acrylic Acid onto Polyvinyl Chloride Fibers

  • Park, Jae-Ho;Lee, Chong-Kwang
    • Nuclear Engineering and Technology
    • /
    • 제8권2호
    • /
    • pp.89-99
    • /
    • 1976
  • Polyvinyl Chloride 섬유에 Acrylic acid (AA)를 방사선을 이용하여 Graft 중합 반응시킬 때 Homopolymer의 방지제인 Ferrous, Ferric, Cupric salt을 첨가시켰다. 방사선 선원으로서는 Co-60의 ${\gamma}$-선 또는 Van de Graaff 가속기를 사용하였으며 조사방법으로는 상호조사법을 이용하였다. Graft 중합반응과 Homopolymerization은 반응계에 첨가시킨 Cation에 의해서 영향을 받았으며 그 효율은 $Cu^{2+}$>$Fe^{2+}$>$Fe^{3+}$의 순서였다. Graft 중합반응속도는 방사선 선량율이 $8.5\times10^3$부터 $1.4\times10^{5}$rad/hr 사이에서 선량율의 0.76중에 비례하였고, Craft 중합반응에 대한 활성화 에너지는 $25^{\circ}$부터 $75^{\circ}C$ 사이에서 6.1 Kcal/mole이었다. 이 때 중합반응 용액은 AA-$H_2O$-$(CH_2Cl)_2$로서 Homopolymer inhibitor의 농도는 $4\times10^{-3}$ mole/1이었다. Graft율은 총선량과 선량율이 클 때 증가하였거나 또는 Polymer 팽윤제인 Ethylene dichloride가 monomer 혼합용액과 포화되었을 때 증가되었다. Acrylic acid가 Craft된 Polyvinyl Chloride 섬유는 흡습율, 열수축성, 용융성이 크게 증진되었고 Tensile properties는 original과 별차이를 나타내지 않았다.

  • PDF

나무딸기(복분자(覆盆子)) 과즙색소(果汁色素) Anthocyanin의 안정성(安定性)에 관한 연구(硏究) (Stability of Anthocyanin Pigment from Juice of Raspberries)

  • 박정미;주광지
    • 한국식품영양과학회지
    • /
    • 제11권3호
    • /
    • pp.67-74
    • /
    • 1982
  • 나무딸기 과즙으로부터 추출한 anthocyanin 색소의 안정성에 관하여 pH, 온도, 유기산, 무기염, 금속이온 등에 대한 영향을 검토한 결과 특히 유기산과 무기염에 의하여 농색화 효과를 나타내었고 또한 지속적인 안정성을 가지므로 이를 관찰하여 보고한다. (1) 상온에서 pH 1$\sim$7의 완충용액에 나무딸기 과즙 색소 anthocyanin을 가하였을 때 초기흡광도는 pH가 낮을수록 높았으며 7일간 저장 중 색소의 분해속도는 pH 1과 2가 과즙색소의 pH인 3.7보다 더 빨랐다. 총색소의 잔존량은 pH 7.0 에서 가장 낮았고 pH 3.7에서 가장 많았다. (2) 온도에 대한 영향은 $40^{\circ}C$에서 6시간 후 색소 잔존율은 약 28%, $5^{\circ}C$에서 약 70%로써 온도가 낮을수록 색소잔존율이 높았다. (3) 유기산 첨가시 흡광도 변화는 첨가농도 증가와 함께 색소액의 흡광도가 증대되었으며 그 순위는 formic acid>acetic acid>n-butyric acid>propionic acid로 나타났다. Formic acid의 농색화 효과는 40일 저장후 무첨가구보다 약 10.3배이며 tartaric acid 약 4배, malic acid 약 3.9배, citric acid 약 3.8배 등의 순으로 농색화가 관찰되어졌다. (4) 무기염 첨가농도에 따른 anthocyanin의 농색화 효과의 순위는 sodium perchlorate>sodium sulfate>sodium chloride>sodium phosphate, monobasic로 나타났다. (5) 금속이온에 의하여 색소용액은 저장 5일에 크게 감소되었으며 저장중 $Cu^{2+}$, $Al^{3+}$의 감소율이 가장 컸으며 $Fe^{2+}$은 비교적 감소율이 작았다.

  • PDF

고온성 방선균에 의한 순소생산에 관한 연구 (제2보) $\alpha$-Amylase의 효소학적 성질 (Studies on the Production of Enzymes by Thermophilic Actinomycetes (PART II) Some Properties of $\alpha$-Amylase from Thermophilic Actinomycetes)

  • Yang, Han-Chul;Park, Yong-Jin;Cho, Hong-Yeon
    • 한국미생물·생명공학회지
    • /
    • 제4권3호
    • /
    • pp.91-97
    • /
    • 1976
  • 고온성 방선균으로부터 내열성 $\alpha$-Amylase의 생산과 그 이용 가능성을 검토하기 위하여 토양시료로부터 $\alpha$-Amylase 생산능력이 극히 우수한 구주를 분리하여 분리균의 몇가지 균학적 성질내지는 효소생산을 위한 배양조건을 조사하여 전보에 발표하였으며 본보에서는 공시방선균이 생산하는 $\alpha$-Amylase의 효소학적 일반성질을 검토하여 다음과 같은 결과를 얻었다. 1) 본효소의 최적활성 pH는 6.5이었으며 최적변성온도는 55$^{\circ}C$~$65^{\circ}C$이었다. 2) 본효소의 안정 pH범위는 7.0~8.0에 위치 하였으며 3) 활성에 대한 금속 ion의 영향은 $Ca^{++}$$Na^{++}$ ion에 의하여 촉진되었으나 중금속 ion인 Fe$^{++}$ Cu$^{++}$ ion등은 현저히 조해함을 보였으며 열안정성에 대한 금속 ion의 효과는 $Ca^{++}$ ion에 의해 증가했다. 4) 본 순소의 Km value는 2.17$\times$$10^{-4}$g per $m\ell$이었으며 5) Activation energy는 12,000$\pm$580 ㎈ per mole 이었다.

  • PDF

사독의 조해물질에 관한 연구 (Inhibitory Substance on the Snake Venoms Produced by Penicillium sp.)

  • Seu, Jung-Hwn;Yi, Dong-Heui
    • 한국미생물·생명공학회지
    • /
    • 제7권2호
    • /
    • pp.75-89
    • /
    • 1979
  • 사독은 단백성물질이며 그 작용은 효소적이다. 동물에 대한 강력한 작용은 독사교상의 치료에 있어서 중요한 문제점을 가지고 있다. 독사에 대한 항혈청의 개발은 오래 전부터 이루어 졌으며 근년에 와서는 거의 완성된 상태라고 생각한다. 그러나 이러한 형편에서도 항혈청에 지니고 있는 몇가지의 결점으로 인하여 유효한 화학치료제의 개발이 요구되고 있다. 그러나 사독의 다양성을 고려할 때 획일적인 치료제를 얻기란 매우 곤란할 것으로 생각된다. 사독을 화학물질로써 불활성화 시키려는 시도는 많아서 chelate 성 물질 thio 화합물, 혹종의 Amino acid, Tannic acid 등 단백질 응고제 등 시험관내에서는 강력히 작용하는 물질이 많이 발견되었으나 이들의 작용은 사독에 대해서 비특이적이며 또한 생체내에서의 작용이 강하여 그의 이용에 많은 제한이 있다. 저자들은 미생물로부터 사독에 대한 조해물질의 검색을 시도했던바 Penicillium 속의 한균주로 부터 유효한 물질을 얻을 수 있었으며 이것을 ISV-33이라 명명하였다. 이 물질은Agkistro-don 및 Trimeresurus 류 사독의 Proteinase와 출혈인자 및 치사인자에 잘 작용하여 이것들을 불활성화시키나 일반효소에는 거의 작용하지 않았다. 이 물질은 사독에 대해서 $\frac{1}{4}$~$\frac{1}{8}$ 량으로서 충분히 작용하나 그 자체의 독성은 위를 대상으로 실험했을 때 거의 나타나지 않는다. 또 이 물질은 사독에 대해서 특이성이 강하며 in vivo에서도 작용한다. 이 물질은 결정성이며 열수에는 용이하게 용해하나 명수나 명종 유기용매에는 거의 용해하지 않으며 단지 Ethylacetate에는 약간 용해한다. mp는 222$^{\circ}C$에서 승화하며 분자량 약 392인 Tetra carboxylic acid로 동정되었다 분자식은(C$_{8}$ $H_{6}$N $O_{5}$)$_2$라고 인정되며 이 물질은 Polycarboxylic acid 이므로 chelate 작용이 있을 가능성이 있으나 금속효소에 대해서는 일률적으로 작용하지 않음으로 사독의 불활성화에 있어서 chelate 작용에 인한 것은 아니라고 생각된다. 그 구조식은 아직 확정하지는 못하였으나 지금까지의 실험결과로서 cyclo hexane을 골격으로 하고 여기에 Epoxy group와 caborxyl 기가 있는 것으로 추정된다. 또 이 물질은 산, Alkali, 가열등에 대해서 매우 안정한 것으로 나타났다. 이 연구의 일부는 문교부 연구조성비(1978년도)에 의해서 수행되었다.

  • PDF