• Archives of Plastic Surgery
• /
• 제39권5호
• /
• pp.504-508
• /
• 2012

Background The most common complication of latissimus dorsi myocutaneous flap in breast reconstruction is seroma formation in the back. Many clinical studies have shown that fibrin sealant reduces seroma formation. We investigated any statistically significant differences in postoperative drainage and seroma formation when utilizing the fibrin sealant on the site of the latissimus dorsi myocutaneous flap harvested for immediate breast reconstruction after skin-sparing partial mastectomy. Methods A total of 46 patients underwent immediate breast reconstruction utilizing a latissimus dorsi myocutaneous island flap. Of those, 23 patients underwent the procedure without fibrin sealant and the other 23 were administered the fibrin sealant. All flaps were elevated with manual dissection by the same surgeon and were analyzed to evaluate the potential benefits of the fibrin sealant. The correlation analysis and Mann-Whitney U test were used for analyzing the drainage volume according to age, weight of the breast specimen, and body mass index. Results Although not statistically significant, the cumulative drainage fluid volume was higher in the control group until postoperative day 2 (530.1 mL compared to 502.3 mL), but the fibrin sealant group showed more drainage beginning on postoperative day 3. The donor site comparisons showed the fibrin sealant group had more drainage beginning on postoperative day 3 and the drain was removed 1 day earlier in the control group. Conclusions The use of fibrin sealant resulted in no reduction of seroma formation. Because the benefits of the fibrin sealant are not clear, the use of fibrin sealant must be fully discussed with patients before its use as a part of informed consent.

• 한국수산과학회지
• /
• 제40권6호
• /
• pp.380-386
• /
• 2007

Egg development and juvenile growth of the Pacific cod Gadus macrocephalus (Korean East Sea Population) were studied to increase fry production using mass cultivation. The eggs were rectangular and adhesive sinking type. The egg size and fertilization rate were 1.01-1.09 mm and 72.4%, respectively. The cumulative times for egg hatching at 3, 6, 9, and $12\;^{\circ}C$ were 600, 360, 240, and 192 hrs, respectively. The hatching rates at 3, 6, 9, and $12\;^{\circ}C$ were 60.2, 68.9, 62.5, and 40.6%, respectively. After 11, 45, and 90 days, the larvae grew to a total length of 5.46-5.99, 9.42-10.06, and 23.0-32.0 mm, respectively. At 100 days from hatching, they grew to an average of 30 mm with a 7.1 % survival rate. By 312 days, juveniles with a total length of 3.6 cm grew to a total length of 14.7-20.1 cm and a body weight of 38.4-73.9 g. The specific growth rates of total length and body weight of the juveniles were 0.50% and 1.12%, respectively.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.648-655
• /
• 2013

Nonpoint source pollution characteristics of recreation park was investigated. Runoff ratio of recreation park ranged 23-57%, which was lower than other urban area since impervious area was less than 37%. The average BOD, COD, TOC, SS, T-N, T-P, were 14.09, 32.86, 12.19, 121.51, 7.78 and 0.72 mg/L, respectively. First flush of recreation park was analyzed by normalized cumulative load - volume curve and mass first flush ratio(MFFn), MFF10 for BOD, COD, SS, T-P, T-N, TOC were 2.90, 1.59, 2.15, 2.74, 2.60, and 1.59, respectively. Observed data showed that 62% of pollutant could be removed by storaging 5 mm rainfall-runoff and even 3 mm depth could store up to 50% of pollutant in runoff.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.436-437
• /
• 2012

Double patterning technology (DPT) has been suggested as a promising candidates of the next generation lithography technology in FLASH and DRAM manufacturing in sub-40nm technology node. DPT enables to overcome the physical limitation of optical lithography, and it is expected to be continued as long as e-beam lithography takes place in manufacturing. Several different processes for DPT are currently available in practice, and they are litho-litho-etch (LLE), litho-etch-litho-etch (LELE), litho-freeze-litho-etch (LFLE), and self-aligned double patterning (SADP) [1]. The self-aligned approach is regarded as more suitable for mass production, but it requires precise control of sidewall space etch profile for the exact definition of hard mask layer. In this paper, we propose etch end point detection (EPD) in spacer etching to precisely control sidewall profile in SADP. Conventional etch EPD notify the end point after or on-set of a layer being etched is removed, but the EPD in spacer etch should land-off exactly after surface removal while the spacer is still remained. Precise control of real-time in-situ EPD may help to control the size of spacer to realize desired pattern geometry. To demonstrate the capability of spacer-etch EPD, we fabricated metal line structure on silicon dioxide layer and spacer deposition layer with silicon nitride. While blanket etch of the spacer layer takes place in inductively coupled plasma-reactive ion etching (ICP-RIE), in-situ monitoring of plasma chemistry is performed using optical emission spectroscopy (OES), and the acquired data is stored in a local computer. Through offline analysis of the acquired OES data with respect to etch gas and by-product chemistry, a representative EPD time traces signal is derived. We found that the SE-EPD is useful for precise control of spacer etching in DPT, and we are continuously developing real-time SE-EPD methodology employing cumulative sum (CUSUM) control chart [2].

• Journal of Gastric Cancer
• /
• 제16권2호
• /
• pp.98-104
• /
• 2016

Purpose: The incidence of gallstones after gastrectomy for gastric cancer is higher than in the general population. However, the causes and mechanisms of post-gastrectomy gallstones are unclear. The aim of this study was to evaluate the incidence of gallstone formation and the risk factors for their development after gastrectomy for gastric cancer. Materials and Methods: Of 1,744 gastric cancer patients who underwent gastrectomy at Seoul National University Bundang Hospital between January 2010 and December 2012, 1,284 were included in this study and retrospectively reviewed. Patients' age, sex, body mass index (BMI), tumor location, stage, type of gastrectomy, type of reconstruction, and extent of node dissection were evaluated. Results: The incidence of gallstones after gastrectomy for gastric cancer was significantly higher in men than in women (P=0.019). Exclusion of the duodenum during reconstruction was associated with a significantly higher incidence of gallstones (P=0.003). Overweight and obese patients with BMI ${\geq}23kg/m^2$ had significantly higher incidence of gallstones than those with a lower BMI (P=0.006). Multivariate analysis showed that obesity (hazard ratio, HR=1.614; 95% confidence interval, CI: 1.135~2.296; P=0.008), male sex (HR=1.515, 95% CI: 1.029~2.231, P=0.033), and exclusion of the duodenum (HR=1.648, 95% CI: 1.192~2.280, P=0.003) were significant, independent risk factors for gallstones after gastrectomy. Conclusions: The cumulative incidence of gallstones for 5 years after gastrectomy was 15.3%. Male sex, obesity, and exclusion of the duodenum were risk factors for gallstone formation after gastrectomy. Careful surveillance will be required for these patient groups after gastrectomy.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.1-10
• /
• 2012

Throughout much of the world, many ecological problems have arisen in watersheds where a significant portion of stream flows are diverted to support agriculture production. Within endorheic watersheds (watersheds whose terminus is a terminal lake) these problems are magnified due to the cumulative effect that reduced stream flows have on the condition of the lake at the stream's terminus. Within an endorheic watershed, any diversion of stream flows will cause an imbalance in the terminal lake's water balance, causing the lake to transition to a new equilibrium level that has a smaller volume and surface area. However, the total mass of Total Dissolved Solids within the lake will continue to grow; resulting in a significant increase in the lake's TDS concentration over time. The ecological consequences of increased TDS concentrations can be as limited as the intermittent disruption of productive fisheries, or as drastic as a complete collapse of a lake's ecosystem. A watershed where increasing TDS concentrations have reached critical levels is the Walker Lake watershed, located on the eastern slope of the central Sierra Nevada range in Nevada, USA. The watershed has an area of 10,400 sq. km, with average annual headwater flows and stream flow diversions of 376 million $m^3/yr$ and 370 million $m^3/yr$, respectively. These diversions have resulted in the volume of Walker Lake decreasing from 11.1 billion m3 in 1882 to less than 2.0 billion $m^3$ at the present time. The resulting rise in TDS concentration has been from 2,560 mg/l in 1882 to nearly 15,000 mg/l at the current time. Changes in water management practices over the last century, as well as climate change, have contributed to this problem in varying degrees. These changes include the construction of reservoirs in the 1920s, the pumpage of shallow groundwater for irrigation in the 1960s and the implementation of high efficiency agricultural practices in the 1980s. This paper will examine the impacts that each of these actions, along with changes in the region's climate, has had on stream flow in the Walker River, and ultimately the TDS concentration in Walker Lake.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.127-132
• /
• 2019

인플루엔자는 인플루엔자 바이러스에 의해 발생하는 급성 호흡기 질환으로 고열, 두통 등을 유발하는 질병이다. 인플루엔자는 특히 변이를 통하여 다 종의 아형을 만들어, 스페인 독감과 같이 수천만 명의 사망자를 내는 등 인류에 심각한 위협을 미치고 있다. 이러한 인플루엔자는 감염 이후에 신속한 진단 검사를 통하여 항바이러스 사용이 필수적인데, 이를 위하여 일반적으로 응급 상황에서 신속하게 진단을 할 수 있는 면역크로마토그래피 기반의 인플루엔자 간이 진단 키트를 사용한다. 본 논문에서는 응급상황에서 준 의료인 등이 인플루엔자 감염이 의심되는 다수의 환자 검진을 가능하게 할 수 있도록 영상 기반의 인플루엔자 판독 기법을 개발한다. 특히 영상 기반의 인플루엔자 판독 시, 판독하는 광원 환경에 따라 발생하는 오류를 최소화하기 위하여 결합 누적 분포 함수 기반의 색상 변환을 통하여 광원의 영향을 최소화하는 알고리즘을 제안한다. 다양한 밝기 변환, 색 온도 등의 환경 조건을 가지는 90개의 실험군에 대하여 본 연구에서 제안하는 알고리즘이 다양한 광원 환경에서 강인함을 확인한다.

• 한국임상약학회지
• /
• 제31권2호
• /
• pp.115-124
• /
• 2021

Background: With an increase in the number of breast cancer survivors, greater importance is attached to health-related quality of life, particularly pain and symptom control. This study aimed to identify the factors that are associated with pain in cancer patients based on the patterns of prescribing opioid, non-opioid, and adjuvant analgesics. Methods: This analysis included new patients who had developed breast cancer between 2003 and 2012. The degree of pain was analyzed based on the socio-demographic (age, income quintile, number of hospitalizations, and duration of disease), indicator (Body Mass Index; BMI, Charlson Comorbidity Index; CCI, Cumulative Analgesic Consumption Score; CACS), operation (mastectomy, lymph node dissection), and therapy (chemotherapy, radiation therapy), as well as complication-related variable (lymphedema). Results: As for the patterns of prescribing analgesics by stages, non-opioid and opioid analgesics constituted 30.7 and 69.3%, respectively. The mean value and variance of CACS were 5.596 and 12.567, respectively. The factors that significantly affected the degree of pain were age (≥50; IRR: 1.848, 95% CI 1.564-2.184, p=0.000), income quintile (IRR: 0.964, 95% CI 0.938-0.991, p=0.008), BMI (≥ 25; IRR: 1.479, 95% CI 1.222-1.795, p=0.000), CCI (≥ 4; IRR: 1.649, 95% CI 1.344-2.036, p=0.000), and lymphedema (yes; IRR: 1.267, 95% CI 1.006-1.610, p=0.047). Conclusions: It is necessary to develop systematic and comprehensive pain control measures to improve the quality of life for breast cancer survivors, especially for those who are 50 years or older, lie in the lower-income quintile, have BMI of ≥25 and CCI score ≥ 4, or have lymphedema.

• 한국동물생명공학회지
• /
• 제36권4호
• /
• pp.212-219
• /
• 2021

The aims of this study were to measure the ultrasonographic biometry of genitalia of the indigenous rams and observe the relationship of biometry on semen parameters. The epididymal volume was significantly reduced (p < 0.01) after semen collection compared with before collection for both left and right part in all rams. The cumulative results showed that although there was no significant difference in length, width and volume of epididymis between before and after semen collection, however the values were lower after collection. The epididymal length was significantly correlated with epididymal volume (p < 0.01), semen motility (p < 0.05) and semen morphology (p < 0.01). Epididymal width was only significantly correlated with epididymal volume (p < 0.01) not with the semen parameters. Epididymal volume had a significant correlation only with semen morphology (p < 0.01).The scrotal circumference had the significant correlation with semen density, mass activity, concentration and motility (p < 0.01). The epididymis had the similar or slightly increased echogenicity as compared to the normal testis. During whole study, some white spots were found on testis which did not affect the semen quantity and quality. Significant variation was observed only for semen concentration and motility among the rams (p < 0.05). The overall normal morphology was 90.5 ± 4.6% with highest percentage of coiled tail abnormalities.

• 대한안전경영과학회지
• /
• 제25권1호
• /
• pp.7-14
• /
• 2023

We attempted to provide an overview of the laws and current state of the 3D printing industry in South Korea and around the world, using the annual industry surveys and the Wohler report. Additionally, we reviewed articles relating to the potential exposure to hazards associated with 3D printing using metal materials. In South Korea, there were 406 3D printing-related businesses, employing 2,365 workers, and the market size was estimated at 455.9 billion won in 2021. Globally, the average growth rate of the 3D printing industry market over the past 10 years was 27.4%, and the market size was estimated at $11.8 billion in 2019. The United States had the highest cumulative installation ratio of industrial 3D printers, followed by China, Japan, Germany, and South Korea. A total of 6,168 patents related to 3D printing were registered in the US between 2010 and 2019. Harmful factors during metal 3D printing was mainly evaluated in the powder bed fusion and direct energy deposition printing types, and there is a case of material extrusion type with metal additive filaments. The number, mass, size distribution, and chemical composition of particles were mainly evaluated. Particle concentration increases during the opening of the chamber or post-processing. However, operating the 3D printer in a ventilated chamber can reduce particle concentration to the background level. In order to have a safe and healthy environment for 3D printing, it is necessary to accumulate and apply knowledge through various studies.