• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.22-33
• /
• 2020

Due to recent increased air traffic,, air traffic controllers in charge of en-route and approach control have faced huge increase in both workload and its intensity. The purpose of this paper is to analyze how much safety culture of air traffic controllers has effect on their complexity mitigation strategies during their duties. It could be expected complexity mitigation improve air traffic flow resulting in enhancing safety eventually. According to empirical analysis against air traffic controllers in civil aviation and air force in South Korea, it was proven safety culture had a statistically positive effect on complex mitigation strategies through safety behavior. In safety culture among air traffic controllers, intrinsic culture had a positive effect on extrinsic value of safety culture. Intrinsic value of safety culture led to air traffic controllers' safety behavior which created work complexity mitigation strategies. Among work complexity mitigation strategies, communication and cooperation was proven to be the most important factor effected by safety culture and behavior. It was implied that enhancing the intrinsic values of safety culture would cause to improve extrinsic safety culture and air traffic controller's work efficiency.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.564-569
• /
• 2021

In this paper, for the typical LED and the tilted LED, when there is no electrode, when 20% absorption (80% reflection) occurs at the electrode, and when 60% absorption (40% reflection) occurs at the electrode, the effect of the absorption at the electrode and the height of the active region on the photon extraction efficiency and the mean photon path length was investigated, and an appropriate height of the active region was proposed. In a typical LED, as the absorption of the electrode increases, the photon extraction efficiency decreases from 18% to 15% and 13%, and the photon extraction efficiency is highest when the height of the active area is located in the center between the two electrodes. In the tilted LED, as the absorption of the electrode increases, the photon extraction efficiency decreases from 38% to 33% and 25%, and the photon extraction efficiency is highest when the height of the active area is located in the center between the two electrodes. The tilted LED can increase the photon extraction efficiency more than twice than that of a typical LED, where photons are trapped inside the chip due to total reflection.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.11-16
• /
• 2021

Recently, three-dimensional (3D) cell culture systems, which are superior to conventional two-dimensional (2D) vascular systems that mimic the in vivo environment, are being actively studied to reproduce drug responses and cell differentiation in organisms. Conventional two-dimensional cell culture methods (scaffold-based and non-scaffold-based) have a limited cell growth rate because the culture cannot supply the culture medium as consistently as microvessels. To solve this problem, we would like to propose a 3D culture system with an environment similar to living cells by continuously supplying the culture medium to the bottom of the 3D cell support. The 3D culture system is a structure in which microvascular structures are combined under a scaffold (agar, collagen, etc.) where cells can settle and grow. First, we have manufactured molds for the formation of four types of microvessel-mimicking chips: width / height ①100 ㎛ / 100 ㎛, ②100 ㎛ / 50 ㎛, ③ 150 ㎛ / 100 ㎛, and ④ 200 ㎛ / 100 ㎛. By injection molding, four types of microfluidic chips were made with GPPS (general purpose polystyrene), and a 100㎛-thick PDMS (polydimethylsiloxane) film was attached to the top of each microfluidic chip. As a result of observing the flow of the culture medium in the microchannel, it was confirmed that when the aspect ratio (height/width) of the microchannel is 1.5 or more, the fluid flows from the inlet to the outlet without a backflow phenomenon. In addition, the culture efficiency experiments of colorectal cancer cells (SW490) were performed in a 3D culture system in which PDMS films with different pore diameters (1/25/45 ㎛) were combined on a microfluidic chip. As a result, it was found that the cell growth rate increased up to 1.3 times and the cell death rate decreased by 71% as a result of the 3D culture system having a hole membrane with a diameter of 10 ㎛ or more compared to the conventional commercial. Based on the results of this study, it is possible to expand and build various 3D cell culture systems that can maximize cell culture efficiency by cell type by adjusting the shape of the microchannel, the size of the film hole, and the flow rate of the inlet.

• Korean System Dynamics Review
• /
• v.15 no.1
• /
• pp.51-74
• /
• 2014

Despite the high efficiency of nuclear power plant, people in Korea do not give approvals and supports the facilities because the risk of the accidents and incidents. In particular, the low level of safety culture is a crucial mechanism that damages the robustness of the NPP. By considering the various definitions of safety culture and analyzing the major reasons of incidents, the conceptual safety culture model is made by using Causal Loop Diagramming. For sustaining development of nuclear power, social supports, incentives and organizational learning are needed. It also requires the coordination of work schedules and the expansion of human resource for protecting the rules and procedures in NPP. Decommissioning aging nuclear power plants will prevent a serious accident. In order to promote the safety culture, Korea Hydro & Nuclear Power Corporation should disclose more information to the public and promote the internal and external communications.

• Journal of Information Technology Applications and Management
• /
• v.18 no.2
• /
• pp.109-134
• /
• 2011

This dissertatioionstudied the relation between orientation of learning, marketing, entrepreneurs and organizational culture and organizational performance. This study tried to look out the factors that the peoples of an organization takes part in the organizational culture to be related to the cultural efficiency and organizational performance. Accordingly result of this study, orientation of learning, marketing, entrepreneurs is related to organizational culture and organizational performance. Customer orieatation of marketing orientation showed a positive effect for organizational non-finantial performance according to mission consciousness of organizational culture.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.503-510
• /
• 2014

Nowdays, costumer's washing behavior were often times for remove to light-duty dirt. The purpose of this study is to provide the most effective washing conditions of detergent concentration and temperature conditions for help save energy and water resources required to the washing process. Washing conditions were as follows: 2 kinds of detergents and 4 types of artificially soiled fabrics were used. Detergent concentration was 0%, -10%, and -20% below the recommended conc. of manufacturer's standard. Temperature of bath was $20^{\circ}C$ and $40^{\circ}C$. The results of this study were as follows: First, washing performances of all kind of artificially soiled fabric improved as the temperature of bath at $40^{\circ}C$. Second, the test was conducted under the condition of decreasing respectively -10% and -20% below of the recommended concentration of manufacturer's standard detergent. The average of washing efficiency was not considerably affected by the reduction of 10% below of manufacturer's standard. Third, in case of the water temperature were $20^{\circ}C$, polyester/cotton blended fiber were higher degree of washing efficiency than cotton fiber.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.614-627
• /
• 2004

The objectives of this study were to investigate the relationships between self-concept and cosmetic benefits sought, to disclose the differences in the benefits according to demographic variables and cosmetic purchase behavior, and to examine how cosmetic benefits were influenced by self-concept and demographic variables of women. Subjects were 453 women in age from 18 to 55 years in Seoul. Four dimensions of cosmetic benefits of women were derived by factor analysis :＇brand orientation＇, ＇fashion＇, ＇economies＇, and ＇functional efficiency＇, Cosmetic benefit was influenced most by family self-concept, and self-concept was influenced most by benefit of economics, next by functional efficiency, and fashion. Brand orientation, fashion, and economics showed significant differences according to marital status. The higher the income, the higher the score on brand orientation, fashion, and functional efficiency. There were significant differences in brand orientation, fashion, and economics according to cosmetic purchase expense, the number of purchase times, and stores, while functional efficiency showed no significant difference depending upon the number of cosmetic purchase times. Brand orientation was influenced by marital status, income, and physical self, fashion influenced by age(-), physical self, income, and family self(-). Economics was influenced by family self(-) and marital status(-). The present findings provided that self-concept such as physical self and family self is significant variables to understand the cosmetic benefits sought.

• Reproductive and Developmental Biology
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2004

This study was performed to establish the effective culture condition for the establishment of clonal lines from porcine fetal fibroblast cells. Fibroblasts derived from a pig fetus (Day 50) were cultured and passaged two times before use. A single cell was seeded in 96-well plates, cultured in medium supplemented with different concentrations of FBS, catalase or $\beta$-mercaptoethanol ($\beta$ME), and classified by cell size and morphology. Cells were passaged two times into 4-well dish before freezing. The establishment efficiencies were not different among different concentrations of FBS (0.3 to 5.1%). However, population doubling time (PDT) was significantly decreased by increasing the FBS concentration (P＜0.05). The establishment efficiency of $\beta$ME-added group (10.4%) was significantly higher than those of catalase-added and control groups (3.5%, and 3.5%, respectively, p＜0.05), and PDT was significantly decreased (23.6 vs 28.1, and 25.5 h, respectively, p＜0.05). However, catalase did not show a positive effect on the establishment efficiency. Cell size and morphology did not affect the establishment efficiency and PDT of clonal lines. The result of present study shows that the establishment efficiency of clonal cell lines can be enhanced by the culture in media supplemented with 30% FBS and $\beta$ME.

• Fisheries and Aquatic Sciences
• /
• v.25 no.10
• /
• pp.525-536
• /
• 2022

Photosynthetic bacteria (PSB) attract considerable interest as useful microorganisms; nevertheless, a generalized culture technique has not been previously reported owing to difficulty in their cultivation. Therefore, a simple culture technique suitable for public use was investigated. Among the PSB tested, the strain Rhodobacter azotoformans EBN-7 was the most suitable for scale-up production because it showed the highest specific growth rate (0.20 h^-1) on basal medium. In scale-up cultivation (500 L), R. azotoformans EBN-7 showed 4.50 × 10¹⁰ colony-forming units mL^-1 (number of viable cells), dry cell weight of 26.8 g/L, and a specific growth rate of 0.15 h^-1. Cultivation using this final culture broth (as seed culture) in a 15 L simple reactor was successful, with maintenance of cell activity evident. For use as seed culture, the maximum allowable preservation period of R. azotoformans EBN-7 at 4℃ was 3 months. When R. azotoformans EBN-7 cultivated in a simple technique was applied to shrimp aquaculture water, NH₄⁺-N was reduced from 0.61 mg/L to 0.24 mg/L (by 60.7%) in 4 days in comparison with the control. Thus, this simple culture technique using R. azotoformans EBN-7 has the potential for a good removal efficiency of NH₄⁺-N, making seed culture easier and suitable for public use.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.203-222
• /
• 2006

This study proposes the methodology of analyzing the expected performance of the Integrated Computing Environment(ICE) on the assumption that the ICE of the agencies and the affiliated organizations under Ministry of Culture and Tourism is constructed and operated. The main objectives of the study are as follows : 1) deriving the performance criteria divided into the operational expected value and the strategic expected value of constructing and operating the ICE for Culture and Tourism informatization, 2) proposing the ways of extracting the detailed criteria for four performance areas(the degree of jnformatization efficiency, the degree of public service, the innovation and development of IS organization, the culture and tourism value creation) to evaluate the operational expected value based on the BSC(Balanced Scorecard) Perspective by using the CSF(Critical Success Factors) methodology, and 3) developing the detailed performance criteria and measures for the economic evaluation of the informatization efficiency from the TCO(Total Cost of Ownership) perspective and suggesting the practical evaluation method by applying them to the case of Culture and Tourism informatization.