• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.55-63
• /
• 2022

The Bigyeokjincheolloe (bomb shell), a scientific cultural heritage, has outstanding historical value for sustaining a gunpowder weapon of Joseon. In this study, the bomb shell was modeled through three-dimensional (3D) scanning centered on the external shape and 𝛾-ray radiography-based on the internal shape. In particular, to improve the contrast in the radiographic image, optimization and image processing were performed. After these processes, the thickness of the inner wall (2.5 cm on average) and the positions of the three mold chaplets were clearly revealed. For exhibition purposes, the 3D model of the bomb shell was output to a 3D printer and the output was rendered realistic by coloring. In addition, the internal functional elements, such as Mokgok, fuse, mud, gunpowder, and caltrops, were reproduced through handwork. The results will contribute to the study of digital heritages in two ways. First, the internal and external shapes of the bomb shell were modeled by fusing two different technologies, namely, 3D scanning and 𝛾-ray radiography. Second, the internal shape of the bomb shell was constructed from the original form data and the reproduction was utilized for museum exhibitions. The developed modeling approach will greatly expand the scope of museum exhibitions, from those centered on historical content to those centered on scientific content.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.220-231
• /
• 2021

The use of digital copies of film-based analog images and the introduction of digital radiographic imaging systems using image plates gradually replace the non-destructive radiationirradiation method of Cultural Heritage. The quality of images obtained from this technique is affected by conditions such as tube voltage, tube current, and exposure time, type of image acquisition medium, distance of the artifacts from the image acquisition medium, and thickness of artifacts. In this study, we evaluated the grayscale image obtained using GE's Computed Radiograhpy (CR) imaging system, the transmission characteristics of the X-ray source for each tree type (pine, chestnut, sawtooth oak, ginkgo) used in wooden Cultural Heritage, and the signal-to-noise ratio (SNR) and contrast. The GE's CR imaging were analyzed using the Duplex wire image quality indicator, line-pair gauges.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.539-548
• /
• 2018

This study was conducted to evaluate the effects of scattering radiation, which was not considered in the cultural Heritage radiography, by evaluating the relationship between the tube voltage (unit: kVp), film-floor-distance(FFD), and lead screen layout. The density (unit: D) of the test specimens and the scattered radiation increased with the tube voltage. The density of the test specimens showed an average deviation of 1.4 D; it was 0.17 D at 60 kVp, 1.54 D at 160 kVp, and 2.97 D at 220 kVp. The mean density of the scattered radiation was 0.10 D at 60 kVp, 0.40 D at 160 kVp, and 0.46 D at 220 kVp. The density tended to increase when the tube voltage ranged between 60 kVp and 160 kVp, as the FFD distance increased. However, a change in the permeation density was not observed for high voltages(160 kVp-220 kVp). Scattered radiation was observed when FFD was 50 mm, 100 mm, and 200 mm and no lead screen was used and the bottom surface was replaced with the lead screen. No scattered radiation was observed when FFD was 0 mm. The identification rate ranged from 2.08% to 2.67%, according to the FFD, for a 160 kVp tube voltage, and from 2.67% to 3.33% for a 220 kVp tube voltage.

• 보존과학연구
• /
• s.31
• /
• pp.17-30
• /
• 2010

There were excavated many relics about 200 pieces including gilt-bronze cap, gilt-bronze shoes, bronze mirror and armor, etc. in Ahndong tumulus, Gildu-ri, Goheung. The National Research Institute of Cultural Heritage was undertaking excavation of major damaged relics that were corroded by several environment and were destroyed by a lump of earth. Shoes are consolidated with soils in order to stop destroy during excavation. And these are relocated in order to treat for conservation. Before treatment, X-ray radiography and CT(Computed Tomography) are used in order to examine the original surface and the shape of shoes. As a result, we confirm the condition of shoes. If soils are removed, gilt-bronze shoes are crumbling into little pieces because gilt-bronze shoes are damaged by corrosion and deformation. So, shoes are consolidating with inner soils and are removing outer soils. Throughout conservation treatment, shoes recovered original form and inner soils are consolidated in order to keep the shape of shoes.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.81-93
• /
• 2014

As the Seated Iron Buddha Statues, Vairocana Buddha of Dopiansa Temple in Cheolwon, Nosana Buddha of Samhwasa Temple in Donghae and Sakyamuni of Mangisa Temple in Pyeongtaek were made during Unified Silla to Koryo Dynasty. These are damaged degradation which are crack, break-out, peel off and various pollutant. As a result of deterioration evaluation using radiography, crack, gap, break-out, pore space and restoration material are confirmed inside in the Buddha Statues. Based on iron strength, the Buddha Statues will be maintain current state as long as a high external impact is not applied. Also, iron core and nails used for fixing of internal and external framework were observed in the Buddha Statues. According to prominent line of surface, embossed inscription, hands cast separately and combined, the Buddha Statues were made by using division casting.

• 보존과학연구
• /
• s.19
• /
• pp.23-34
• /
• 1998

Bokam-ri site was excavated from July 1996 to September 1998 and archaeologically assumed to be grouped with tombs of Mahan period. Among these groups, Tomb No. 3 had built up with stone chamber and found one pair of gilted footware near the jar coffin. This footware was severely corroded and cracked so transfered it gently with soil. Radiography film of this footware showed spike decorations on the bottom and fish-shapped ornament. Gilted footware was consolidated with soil using Paraloid B72 10%~15%solution and cleaned using small tools and microscope. SV427 and HV427 as epoxy resin and Araldite(rapid type) used for joining and restoring. The fore part of gilted footware was connected with nails and folded “L” shape to introduce the bottom material. Tortoise-shell design and flower ornaments appeared on the surface and fish-shaped ornaments, spikes and spangles on the bottom. It was found that 7 spikes and 5 fish-shaped ornaments remained well. Especially, Fish-shaped ornaments were firstly found in the gilted footware and appraised archaeologically important materials.

• 보존과학연구
• /
• s.8
• /
• pp.13-34
• /
• 1987

A large number of metallic relics were excavated by a team of Kyungsang University museum (Nov. 25, 1985 - Jan. 29, 1986) from the groups of tombs located at No. 9 Mountain,Okchun Village, Sungsan-Ri, Ssangchak-Myon, Hyopchun-Kun, Kyungsangnam-Do which are believed to date back to Kaya period. The Research Institute of Cultural Properties was in charge performing scientific conservation and restoration for the iron cuirass and horse halmet (for one year and seven months, Feb. '86 - Sep. '87)The scientific processing for them are as follows :1. Taken Photo and record the actual conditions prior to conservation.2. Taken radiography3. Elimate Goethite ($\alpha$-FeOOH) layer on the surface using Air-brasive, remaining Magnetite ($Fe_3O_4$) layer.4. Treat to dechlorinize with 3% Sodium-Sesquicarbonate5. Protected the relics with Ruscoat acryl resin using vacuum infiltration method.6. Joint the sherd using Araldite and Microballoon mixture.7. Restored missing parts by Araldite SV 427 and HV 4278. Made record and taken photo after restoration Several hundred of sherds of relics, small or large, were restored by assortment which this method for the purpose of contributing to the further study of ancient Kaya history.* Conservator, National Research Institute of Cultural Properties.

• 보존과학연구
• /
• s.15
• /
• pp.1-20
• /
• 1994

A typology was established for 15 pottery artefacts at Chejuisland. Conjectured methods of manufacture were confirmed by radiography X-ray diffraction. Scanning electron microscopy etc. The compositions and mineralogy of $500^{\circ}C$ to $1200^{\circ}C$ was measured and compared with those of microstructure. The mechanism of sintering was impurity-initiated, liquid-phase sintering. The making, firing, and sometimes exploding of the figurines may have been the prime function of the pottery at this site rather than being manufactured as permanent, portable object.

• 보존과학연구
• /
• s.15
• /
• pp.33-51
• /
• 1994

Scientific study for Chong-Tong was carried out firstly by ICP and C /S analysis. Hyeon-Ja-Chong-Tong is made by Ryang-Ne-Ryo_Dong and identified the oldest Chong-Tong among them same items never since excavated from in Korea. It was found that Byol-Seung-Ja-Chong-Tong includes gunpowder and by $\gamma$-Radiography and casted at the 1592 just before Hideyoshi's invasion of Korea. these Chong-Tong is fired by the fuse is the muzzl-loading.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.353-366
• /
• 2012

This study was interpreted the making techniques of the Four Guardian Statues in Wanju Songkwangsa Temple, and retained basic data necessary for conservation treatment and restoration of the same material by estimating the soil source. The molding clay used in the Statues showed a variety of material characteristics according to different layers. The first and mid layers estimated as the original molding clay are composed of the same kind of soil. The soil of the finish layer was also confirmed to be genetically similar to that of the first and mid layers, despite little discrepancy. The former restoration layer was inconsistent in material characteristics with the original molding clay in every result of analysis. As a result of gamma radiography, making techniques of the Statues were able to identify the figure of the frame connecting the woods of main pillar frame to sub-frame and steel wire with ㄷ-clamp, nails and straw ropes, and the molding clay constructed upon the frame. Meanwhile, provenance interpretation confirmed that the soil of the estimated provenance area is of the same origin as the soil of the finish layer, and therefore is an appropriate material for conservation treatment. This result will contribute to the research on making techniques of the molding clay Statues.