• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.132-158
• /
• 2023

The five-story and seven-story stone pagodas at Cheongnyangsaji temple site in Gongju are located under the Sambulbong peak of Gyeryongsan mountain, and are known to have been built of the middle in Goryeo dynasty. As the two pagodas in which two types of Baekje stone pagoda coexist in one era, their historical and academic value are recognized. The seven-story pagoda was overturned by robbery in 1944, and as a result, the five-story pagoda was tilted. Although the two pagodas were restored in 1961, structural instability was continuously raised. In this study, measurement data accumulated from May 2021 to March 2022, and seasonal characteristics were reviewed, and the micro behavior of pagodas were analyzed according to temperature and precipitation during the same period. As a result, the micro thermoelastic behavior was repeated according to the daily temperature change in all sensors, and both the slope and the displacement showed microscale behavior. In the inclinometer, moisture containing the surface and inside of the stones repeated expansion and contraction due to temperature change, showing the micro movements. In particular, the upper part of the five-story pagoda moved up to 3.89° to the northwest, and the seven-story pagoda tilted up to 0.078° to the northeast. The maximum displacements were recorded as 0.127 and 0.149 mm in the five-story and the seven-story pagoda, respectively. These values tended to return to the original position at the end of the measurement, but did not recover completely, indicating a state requiring precise monitoring. The result obtained through the study can be used as basic data for the stable conservation of the two stone pagodas. Based on the behavioral characteristics considering various environmental factors should be analyzed, and the preventive conservation through the maintenance of measurement system built this time should be continued.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.47-55
• /
• 2024

The aim of this study is to evaluate the possibility of damage to cultural assets resulting from vibrations generated by construction vehicle traffic. The cultural heritage's natural vibration frequency was determined to be 150Hz by measurement. The damping ratios were calculated as 4.7% using the logarithmic decrement approach and 4.3% using the half-power method. The vibration measurements obtained during vehicle operation indicated that, despite an increase in vehicle velocity of up to 15 km/h, the vibrations remained below the detectable level of 0.13 mm/sec. When the road is curved and the terrain is sloped, a suitable speed for vehicle operation was found to be around 17 km/h, at which point vibrations were seen. The highest recorded vibration amplitude at this velocity was 0.217 mm/sec, which remains below the stringent regulation limit of 2 mm/sec. Thus, it can be concluded that there is no actual harm caused by vibrations.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.15-20
• /
• 2004

Two pieces of choson-Tongue(朝鮮通寶) minted at 1423 A.D. were analyzed by atomic absorption spectroscopy and neutron activation analysis. The measurement of lead isotope ratios was also carried out in order to predict the provenance of raw materials used for minting. The Chosen-Tongue was minted as bronze having the chemical compositions of $Cu\;90\%,\;Pb\;3\~4\%,\;Sn\;2\~3\%$, which were different from the typical composition of Chinese and Japanese coins. The results of lead isotope ratios showed that the provenance of raw materials used for minting had a possibility to be originated from South China. And application of statistical linear discriminant analysis (SLDA) to the provenance of lead used for minting of Chosen-Tongue was confirmed.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.301-306
• /
• 2006

Damages of cultural properties is caused by subsidence of foundation relating stone structures. To prevent of these structures, ground monitoring should be achieved certainly. Representative ground subsidence cause is saturated and unsaturated condition that is produced repeatedly by groundwater level fluctuations. It controls role that decrease porosity or effective porosity of soil media. Estimation of physical properties can predict from reaction of dielectric constant. Variations of dielectric constants are measured from physical characteristics change of pore, soil particle, air and water which are consisted to ground. Therefore, ground subsidence monitoring is thought that quantitative measurement is available using dielectric response of media.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2017

The rock-carved seated Buddha of Unju temple of Hwasun, Jeonnam, the only Triad Buddha among the stone Buddhas of Unju temple, is currently designated as a tangible cultural property No. 275 of Jeollanam-do. The rock of the seated Triad Buddha bedrock is light-green andesitic tuff breccia that is composed of quartz and feldspar. The results of measurement of the whole rock magnetic susceptibility characteristics, the rock consists of a single sedimentary layer from top to bottom. The results of ultrasonic velocity measurement, show that the number of frequency of 1500~2000 m/s increased and the number of frequency of 2000~2500 m/s decreased in 2009 compared to 2015, and the measurement value for 2000 m/s or below was 87.5% in 2015, a 68.8% increase in comparison to that in 2009. Moreover, on the top, bottom, left side, and head areas of the Triad Buddha, a partial expanding tendency was observed in the range of low ultrasonic velocity. As weathering of the Triad Buddha occurs in the long term, on-going monitoring is required to ascertain the degree of change with time.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.305-319
• /
• 2012

The Myeongdongseongdang Cathedral, which was designated as Historic Site No. 258 in Korea, is a representative cathedral of Korean Catholic church designed by a French priest Eugene-Jean Georges Coste and completed in 1898. It is a Gothic-styled architecture constructed with bricks and stones. Lithological and mineralogical analyses determined that holy stone relics were made of marble and granite, and foundation stones are of pink feldspar granite. Deterioration mapping and ultrasonic measurement revealed main weathering and damage were exfoliation (40%) and black discoloration (37%) in the holy water basin, and exfoliation (6%) and discoloration (46%) in the exterior foundation stones. Ultrasonic velocity of the stones were calculated as 3,525m/s in the holy water basin and 2,795m/s in the exterior stones that indicated these stones were sorted into moderately to highly weathered rock. This was resulted from moisture and atmospheric pollutants around the cathedral.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.399-416
• /
• 2017

The 'Wat Phou and Associated Ancient Settlements within the Champasak Cultural Landscape' of Laos was designated as a UNESCO World Cultural Heritage in 2001. The uppermost structure of the Sanctuary in Wat Phou has been destroyed and being variably damaged, maintenance is required through scientific and systematic diagnosis. The Sanctuary of Wat Phou was constructed mainly using sandstones and bricks. There are physical damages including fracture, break out, exfoliation and interval as well as biological damages by lichen, mosses and weeds. According to the ultrasonic velocity measurement and property evaluation of the sandstones of the Sanctuary in Wat Phou, weathering index of the eastern side sandstones is 0.10 to 0.74 (mean 0.36), showing MW grade. Southern and northern side sandstones have relatively higher properties with average weathering indices of 0.30 and 0.32. The results of slope analysis of the Sanctuary, indicated that the 4th spot in the southern side has the largest slope of $5^{\circ}W$, seemingly due to the unstable ground around the Sanctuary. Based on the relative level measurement and past drawings, the Sanctuary is verified to have been located on ground with a certain slope rather than flatland. The ground of the southern side is inclined $1.51^{\circ}$ more than that of the northern side, which will affect the structural stability of the temple. The interval width of the selected southern spot is the largest with an average width of 159.5 mm, and the largest width is 328.3 mm at the top, since the width increases above rather than below, seemingly due to the unequal subsidence of the ground. Constant maintenance for conservation is required for the structural stability of the Sanctuary in Wat Phou, which was partly collapsed and has also suffered physical damage.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.217-228
• /
• 2012

Damage of cultural properties happens variously. Particularly, the surface damage of metal cultural properties exposed outdoors lowers historical and art historical value of artifact by artificial damage such as paint, scribbling containing oily material and so on. Therefore, this study compared dry-ice pellet cleaning with poultice when clearing paint and oily material environment-friendly, harmlessly to humans and without damage of artifact. As the result of experiment, when clearing those (paint and oily material) by poultice, oily paint was cleared, but there were spots of metal surface. Also, Lacquer spray wasn't well cleared, and resin came off the surface of artifact. When clearing those by dry-ice pellet cleaning, oil paint was cleanly cleared without surface damage of artifact according to Stereoscopic microscope observation, color-measurement, FT-IR, SEM analysis. Also, lacquer spray seemed to be cleared with the naked eye, but there were minute particles on surface according to the result of SEM observation. Consequently, we could confirm possibility of dry-ice pellet cleaning substitution.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.9-22
• /
• 2012

The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed $Al_2O_3/SiO_2$ with high $SiO_2$ contents and relatively low $Al_2O_3$ contents for iron ore, indicating t hat for $Al_2O_3$ below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for $Al_2O_3$ below 1% was found to be $1,020{\sim}1,050^{\circ}C$. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near $1,150{\sim}1,280^{\circ}C$ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near $1,400^{\circ}C$, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.403-415
• /
• 2019

According to oral tradition, the King Sejo's palanquin is indeed the palanquin of King Sejo, the 7^th monarch of the Joseon dynasty who reigned from 1455 to 1468, which was left behind after visiting the Magoksa temple. The palanquin is painted in five colors, mainly black, white, yellow, red and green. The chromaticity measurement of the yellow pigment showed that orpiment and gold are a noticeable distinction between the lightness and b^⁎ values. In the case of the red pigment, a^⁎ values of areas painted with cinnabar tend to measure at high values. As a result of the optical microscopy, scanning electron microscopy and energy dispersive spectroscopy analyses, it was determined that Chinese ink was used for the black pigment, lead white and white clay were used for the white, and orpiment and gold for the yellow. The red pigment was found to be the result of minium, cinnabar and red ocher, atacamite was used as green pigment. Though the analysis results of the cross sections on very small exfoliation fragments of pigments, it was confirmed that white clay and lead white were used for the preparation layer. In addition, several coloration techniques were considered based on these analyses.