• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1108-1113
• /
• 2017

In this paper, a bidirectional topology for quasi-Cuk dc/dc converter with capability of zero-voltage and zero-current-switching (ZVZCS) is proposed. The bidirectional quasi-Cuk (BQ-Cuk) converter has different voltage and current transfer ratio, reduced voltage stress on capacitor and capability of changing the output polarity in comparison with conventional bidirectional Cuk converter. In this paper, steady-state analysis of the quasi-Cuk converter with capability of ZVZCS in turn-on is presented. Then, critical inductances for transient from this operation to two new operations are calculated. Next, besides values designing of used elements, maximum and minimum value of their current and voltage are calculated. Finally, experimental results to verify the accuracy of the proposed converter in different operating modes are presented.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.513-516
• /
• 2004

본 논문에서는 Custom Power의 전력품질 향상을 위한 PWM Cuk AC-AC 컨버터를 제안한다. AC line Conditioner, 위상천이기와 같은 고정주파수 가변전압(WCF:Variable Voltage Constant Frequency)응용에 사용되는 PWM Cuk AC-AC 컨버터를 모델링함에 있어서 복소 회로 DQ 변환을 사용하여 전압이득, 역률과 같은 정적인 특성에 대한 해석적인 식을 구한다. 끝으로, PSIM 시뮬레이션을 통하여 해석과 모델링의 타당성을 보일 것이다.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1278-1288
• /
• 2019

A DC-DC Non-Isolated Three-Port Cuk-Cuk (NI-TPCC) converter for interfacing renewable energy sources (RESs) such as Fuel Cell (FC) and Photovoltaic (PV) energy with a DC load is presented in this paper. It features single-stage power conversion from both of the input ports to the load port. The proposed NI-TPCC converter is designed based on the classical Cuk converter. The operational modes and power flow are analyzed in the continuous conduction mode (CCM), and the relationships among the port voltages are derived. Continuous currents in all three ports with less ripple enhance the performance of a fuel cell and its operating life. Furthermore, the output inductor is shared with both of the input ports, which reduces the number of active and passive components. The effectiveness of the designed NI-TPCC converter has been validated through simulation and experimental results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.517-520
• /
• 2004

본 논문에서는 복소 회로 DQ 변환 기법을 활용하여 3상 PW Cuk AC-AC 컨버터에 대한 완전한 정보를 포함하는 등가모델을 제시하고, 이 모델로부터 상태방정식과 같은 컨버터의 동적 특성의 해석적친 표현을 유도하였다. 또, 이러한 동적 동작특성 해석에 대한 결과는 PSIM 시뮬레이션을 통하여 그 타당성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.579-582
• /
• 2004

This paper presents controller design of a static var compensator using PWM Cuk AC-AC converter. The PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation and perturbed around the operating point whereby the small signal system characteristics is analytically obtained. Finally, the PSIM simulations show the validity of the modelling and analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.597-600
• /
• 2004

In this paper, a static var compensator using PWM Cuk AC-AC converter is presented. The PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation whereby the basic condition to be used as a var compensator is derived and the static characteristic equations such as input current and reactive power is analytically obtained. Finally, the PSIM simulations show the validity of the modelling and analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 2003

In this paper, a PWM Cuk AC-AC converter for WCF applications such as AC line conditioner, phase shifter is presented. The PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation whereby the characteristics equations such as voltage gain and the interested voltage and current is analytically obtained. Finally, the PSIM simulation show the validity of the modelling and analysis.

• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.431-439
• /
• 2006

본 논문에서는 PMW Cuk AC-AC 컨버터를 위한 새로운 commutation 회로를 제안한다. 제안된 commutation 회로는 컨버터 전류의 commutation을 위하여 개선된 Undeland 스너버를 이용한다. 개선된 스너버 회로는 주 스위치의 전압/전류 스트레스 저감, 효율 개선과 같은 장점을 갖는다. 본 논문에서는 실험을 통하여 제안된 commutation 회로의 효과와 적용 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.275-277
• /
• 2006

This paper proposes a snubber circuit for a PWM Cuk AC-AC converter. The proposed snubber makes use of an Undeland snubber as a commutation aids. So the snubber keeps such good features as small count of snubber elements, reduction of voltage/current stress of main switching devices and improved efficiency. This paper shows simulation results to verify the adaptability and feasibility of the proposed snubber.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.143-145
• /
• 2006

This paper proposes a snubber circuit for a PWM AC-AC Cuk converter. The proposed snubber applies a modified Undeland snubber as a commutation aid. The snubber circuit has some good features such as reduction of voltage/current stress of the main switches, improved efficiency. The experiment results show the adaptability and feasibility of the proposed snubber circuit.