• Journal of Chest Surgery
• /
• 제51권6호
• /
• pp.423-426
• /
• 2018

This study determined the feasibility of the cuff technique for small-caliber vascular grafts in a rat model. A graft was implanted with the cuff technique or suture technique in a 1-cm segment of the abdominal aorta in 12 rats. The mean aortic clamp time was 29 minutes with the cuff technique and 44 minutes with the suture technique; the cuff technique was significantly shorter. Abdominal angiography at 1 week after implantation showed no significant stenosis in 9 rats, focal stenosis of the mid-portion of the graft in 1 rat with each technique, and total occlusion of the graft in 1 rat with the suture technique. We have successfully used the cuff technique for anastomosis for small-caliber vascular grafts in an animal model.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.210-210
• /
• 2009

For a bursal-side retracted laminated rotator cuff tear, simple repair of the retracted bursal-side rotator cuff might be insufficient because the repaired tendon could remain as an intratendinous tear of the rotator cuff. We present a repair method for intratendinous rotator cuff tears using the suture-bridge technique. We believe that this method helps to preserve the remnant rotator cuff tendon without tissue damage and restores the normal rotator cuff footprint in bursal-side delaminated rotator cuff tears.

• Clinics in Shoulder and Elbow
• /
• 제19권1호
• /
• pp.51-58
• /
• 2016

The arthroscopic rotator cuff repair is now considered a mainstream technique with highly satisfactory clinical results. However, concerns remain regarding healing failures for large and massive tears and high revision rate. In recent decades, various repair strategies and construct configurations have been developed for rotator cuff repair with the understanding that many factors contribute to the structural integrity of the repaired construct. The focus of biomechanical test in arthroscopic repair has been on increasing fixation strength and restoration of the footprint contact characteristics to provide early rehabilitation and improve healing. These include repaired rotator cuff tendon-footprint motion, increased tendon-footprint contact area and pressure, and tissue quality of tendon and bone. Recent studies have shown that a transosseous tunnel technique provides improved contact area and pressure between rotator cuff tendon and insertion footprint, and the technique of using double rows of suture anchors to recreate the native footprint attachment has been recently described. The transosseous equivalent suture bridge technique has the highest contact pressure and fixation force. In this review, the biomechanical tests about repair techniques of rotator cuff tear will be reviewed and discussed.

• 대한관절경학회지
• /
• 제16권1호
• /
• pp.98-103
• /
• 2012

회전근 개 파열의 봉합술은 최근 들어 괄목할만한 발전을 보여주고 있다. 회전근 개 파열의 자연사를 관찰하면 대부분의 경우에서 시간이 지남에 따라 크기가 증가하는 양상이 관찰되었다. 회전근 개 파열의 후기에 오는 지방 침윤 및 광범위 회전근 개 파열 후 발생하는 회전근 개 파열 관절증은 회전근 개 파열의 봉합술에서 예후를 예측하거나 수술 시기를 결정하는데 중요한 요소라 할 수 있다. 회전근 개 파열시 증상 발생 후 3년 뒤에 중등도의 지방 침윤이 발생하는 것으로 관찰되어 그 이전에 회전근 개 파열의 봉합술을 시행하는 것이 추천되고 있으며, 또한 회전근 개 파열 관절증에서도 견봉상완골 간격이 감소하기 전에 봉합술을 하는 것이 권장되고 있다. 회전근 개 파열의 관절경하 봉합술은 크게 일열 봉합술 및 이열 봉합술로 나눌 수 있으며, 시간과 비용 면에서는 전자가 장점이 있으나, 생역학적이 관점에서는 후자가 더 우수하다. 이열 봉합술의 생역학적인 장점을 유지하면서 보다 적은 시간에 회전근 개의 봉합을 가능하게 한 교량형 봉합술이 개발되어 최근 널리 사용되고 있으며, 교량형 봉합술 내에서도 파열의 특성에 따라 몇 가지 다른 술식이 개발되어 사용되고 있다.

• Clinics in Shoulder and Elbow
• /
• 제10권2호
• /
• pp.155-159
• /
• 2007

관절경적 일열 봉합법은 잘 정립된 회전근 개 봉합술로 우수한 임상성적을 보여왔다. 하지만, 수술 후 재파열의 빈도가 높은 것으로 알려져 있어 다양한 방법들이 술 후 재파열을 줄이기 위하여 시도되어왔다. 일부 연구들에서는 해부학적 회전근 개 부착부를 재건하면 봉합한 회전근 개의 치유 및 초기 역학적 강도를 증가시킬 수 있을 것이라고 보고하였고, 이열 봉합법이 해부학적 회전근 개 부착부 재건과 봉합부의 강도를 증가 시키고, 간격형성을 감소 시킬 목적으로 소개되었다. 하지만, 재부착된 회전근 개 건의 장력, 봉합된 건의 혈관 형성 등의 생물학적 치유환경이 일렬 봉합법에 비하여 우수함이 아직 입증되지 않았고 수술 후 기능적 개선도 측면에서도 두 봉합술간 차이가 없으므로, 수술 수기가 상대적으로 쉽고, 요구되는 기구 및 내고정물의 추가적 비용이 적어 경제적인 측면에 장점이 있는 일렬 봉합법은 여전히 추천되는 수술수기이다.

• Clinics in Shoulder and Elbow
• /
• 제19권4호
• /
• pp.237-240
• /
• 2016

Retear patterns after arthroscopic rotator cuff repair are classified into two patterns according to retear location. Type 1 is when the retear pattern occurs directly on the tendon at the bone repair site using the suture anchor repair method. Type 2 is when the retear pattern occurs at the musculocutaneous junction with a healed footprint in patients who undergo the suture bridge method. Here, the authors report another retear pattern, which was identified as a type 2 retear on magnetic resonance imaging in patients who had undergone arthroscopic rotator cuff repair by the suture-bridge technique. This pattern was different from the type 2 retear and occurred at the portion of the cuff away from the healed rotator cuff under the view of the arthroscope.

• Clinics in Shoulder and Elbow
• /
• 제21권2호
• /
• pp.101-104
• /
• 2018

Since shoulder have a higher proportion of muscle which would have low electrical resistance, there could be more electrical damage to the rotator cuff muscles. We present a patient with acute rotator cuff tear by sudden uncontrolled jerking contractions caused by an electrical shock. A case of 42-year-old man with acute rotator cuff tear due to electrical injury to the shoulder was presented. Magnetic resonance imaging showed a full thickness tear and an undulating appearance of the peripheral end of the torn supraspinatus and infraspinatus muscle, suggesting an acute complete rupture. By arthroscopic surgery, the torn rotator cuff tendons were repaired with a suture bridge technique. At the final follow-up, the patient had a full, pain-free range of motion and had fully recovered shoulder muscle power.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.162-162
• /
• 2009

After preparation of the bone bed, two doubly loaded suture anchors with suture eyelets are inserted at the articular margin of the greater tuberosity. A retrograde suture-passing instrument penetrates the rotator cuff to retrieve the sutures through the modiWed Neviaser or subclavian portal. An ipsilateral pair of suture eyelets in the suture anchor is passed through the margins of the rotator cuff tear. The blue suture of the second and third pair is pulled out of the lateral cannula, and the threaded blue suture of the third pair in the needle is passed through the blue suture of the second pair. After retrieving the blue suture of the firrst pair through the anterior portal, it is pulled out to pass the blue suture of the third pair through the eyelet of the anteromedial anchor. The blue suture is linked between two anchors. The medial row of suture bridge is repaired with a sliding knot, and the sutures are not cut. Once the rotator cuff repair using the suture-bridge technique has been performed, the two blue strands in the anterior portal are tied. We describe our technique that possesses the advantages of both the double-pulley and suturebridge techniques, which improves the pressurized contact area and maximizes compression along the medial row.

• Clinics in Shoulder and Elbow
• /
• 제6권1호
• /
• pp.50-54
• /
• 2003

Object: To evaluate the efficiencies of the arthroscopic rotator cuff surgery which is Performed without the traction system in the lateral decubitus position. Methods: Twenty-nine cases of the arthroscopic rotator cuff surgery performed without the traction system in the lateral decubitus position were studied from February, 2002 to January, 2005. We performed a repair using the arthroscopic debridement and the arthroscopic rotator cuff repair, or using the mini-open incision technique after the confirmation of rotator cuff tear, then, the arthroscopic subacromial decompression was performed after the confirmation of subacromial lesions Results: We could easily find the subscapularis tear which was often overlooked in the arthroscopic rotator cuff surgery performed with the traction surgery by the relaxation of the subscapularis, as the arm position was internally rotate about 45 to 70 degrees from abducted position. We found that the operation time was reduced 14 minutes shorter than the operation time of the controlled group which had the surgery with the traction system on the average. We also found that there were no neurovascular complications from all cases. Conclusions: The arthroscopic rotator cuff surgery without traction system in the lateral decubitus position provided the better visual field, easy manipulation of the joint and reducing operation time.

• 대한정형외과학회지
• /
• 제54권2호
• /
• pp.91-99
• /
• 2019

대부분의 환자는 관절경적 회전근 개 봉합술 후 통증이 완화되고 기능적 호전을 보이지만 일부 환자는 수술 후에도 증상이 지속된다. 재파열은 생물학적, 기술적, 외상적 요인이 복합적으로 작용하여 발생한다. 회전근 개 봉합술 후 재파열이 지속되는 통증의 원인일 수도 원인이 아닐 수도 있다. 따라서 이런 환자들의 평가 및 치료는 난해하여 철저한 문진, 이학적 검사, 적절한 영상 검사를 통해서 통증의 원인에 대한 분석이 이루어져야 한다. 재봉합술의 시행 여부는 환자의 나이, 기능적 요구도 회전근 개의 상태, 수술 전 관절 운동 범위, 삼각근의 상태, 관절과 상완 관절의 관절염의 유무에 따라 결정되어야 한다. 성공적인 재봉합술은 술기뿐만 아니라 수술 전 환자 교육 또한 중요하다.