• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.66-68
• /
• 2001

An experiment was conducted investigate the of supplemental Cu and Zn methionine chelates on the performance, nutrient digestibility, serum IgG level, gizzard erosion, and Cu and Zn contents in the liver and excretion of broiler chickens. One thousand hatched broiler chickens (Ross) of one day old were assigned to 4 treatments:control(T1), 100ppm of copper in the from of Cu-methionine chelate(Cu-Met, T2), 100ppm of zinc in the from of Zn-methionine chelate(Zn-Met, T3) and 100ppm of copper plus 100ppm of zinc in the from of methionine chelate(Cu-Zn-Met, T4). Each treatment had four replications of 50 bird each. Weight gain of chicks fed chelated products were significantly higher than that of chicks fed control(P＜0.05).Combination of Cu and Zn chelates(Cu-Zn-Met) tended to show the best growth rate and feed conversion ratio. Nutrient digestibilities were not affected by dietary treatments. Serum IgG level of chicks fed Cu-Zn-Met was significantly higher than that of chicks fed control(P＜0.05). Gizzard erosion index was not significantly different among treatments. Contents of Cu and Zn in liver were not significantly affected by dietary treatments, whereas excretions of these minerals were significantly affected by dietary treatments.

• 한국주조공학회지
• /
• 제34권3호
• /
• pp.100-106
• /
• 2014

In recent years, Mg and its alloys have attracted a great deal of attention due to their low density, relatively excellent castability, and straightforward recyclability. Mg alloys have been widely applied to various industrial fields, and are representatively used in automotive and electronic parts. According to previous researches, the electrical conductivity of Mg alloys greatly decreases with increasing Al content. However, with the addition of Zn and/or Cu, the electrical conductivity of Mg alloys is maintained or slightly increased, and improved mechanical properties are obtained as well. On this basis, Mg-Zn-Cu alloys have been investigated in the present study with a focus on the effect of adding Zn and Cu on the electrical conductivity. The Zn and Cu contents ranged from 4 to 6wt.% and 0 to 1.5wt.%, respectively. Ternary Mg-Zn-Cu alloys have been prepared by gravity casting in a steel mold. In the as-casting condition, the electrical conductivity of Mg-Zn-Cu alloys showed a linear increasing trend with decreasing Zn and increasing Cu contents. Furthermore, impact values of Zn = -1.5 and Cu = 2.5 were determined for these alloys by electrical conductivity tests.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권12호
• /
• pp.1804-1808
• /
• 2003

A layer experiment was conducted to determine the effects of supplementary methionine chelates (Cu, Zn and Mn), individual or in combination, on laying performance, eggshell quality, gizzard erosion, and IgG level of serum for 8 weeks. Five hundred 96-wk-old force molted ISA Brown layers were assigned to five dietary treatments. Basal diet was formulated to meet or exceed the nutrients requirements listed in NRC (1994). Five experimental diets were control, Zn-methionine chelate (Zn-Met) supplemented, Cumethionine chelate (Cu-Met) supplemented, Zn-Mn-methionine chelate (Zn-Mn-Met) supplemented and Zn-Mn-Cu-Met supplemented diet. Each treated diet was supplemented with respective mineral(s) at the level of 100 ppm in the form of methionine chelate. Egg production was increased by Cu-Met supplementation but decreased by Zn-Met supplementation. Egg weight was significantly (p<0.05) lower in Cu-Met treatment than those of the control and Zn-Met treatment. Specific gravity of eggs and eggshell strength were highest and soft egg production was lowest in Cu-Met treatment. Gizzard erosion index was significantly increased by supplementation of Cu-Met, Zn-Mn-Met or Zn-Mn-Cu-Met. Zinc content in liver significantly increased by Zn-Met, but not by Zn-Mn-Cu-Met treatment. In conclusion, 100 ppm Cu in Cu-Met chelate improved laying performance and eggshell quality but also increased gizzard erosion index. Supplementation of Zn-Met or its combination with other mineral chelates had no beneficial effects on laying performance and eggshell quality.

• 한국자기학회지
• /
• 제5권6호
• /
• pp.937-946
• /
• 1995

본 연구에서는 NiCuZn Ferrite 제조공정의 제어를 위하여 제조공정 변수에 따른 NiCuZn Ferrite의 물성 및 자기적특성의 변화를 검토하여, 겉보기밀도(bulk density)와 초기투자율의 관계를 명확하게 하는 것을 목적으로 하였다. $700^{\circ}C$에서 3시간 하소 한 NiCuZn Ferrite를 약 60시간 볼밀링하여 약 $0.5\mu\textrm{m}$ 입자크기로 분쇄한 후 분무 건조하여 과립화하였다. 본 연구에서는 (1)NiCuZn Ferrite 과립의 크기와 성형압력 변화와 (2)일정한 성형조건에서 소성온도의 변화에 따른 성형체 및 소성체의 물성측정, 그리고 자기적 특성을 검토하였다. NiCuZn Ferrite의 green density는 과립의 크기보다는 성형압력에 더 의존하였으며, 과립의 크기가 $150\mu\textrm{m}$ 이하 일 때 성형압력이 증가 함에 따라 green density는 $2.484\;g/cm^{3}$에서 $3.002\;g/cm^{3}$로 크게 증가하 였다. NiCuZn Ferrite의 bulk density는 소성온도에 의하여 거의 직선적으로 $3.470\;g/cm^{3}$에서 $4.754\;g/cm^{3}$로 증가하였다. 성형압력 변화 및 소성온도 변화에 따른 NiCuZn Ferrite 초기투자율과 겉보기밀도 관계를 비교 검토한 결과, NiCuZn Ferrite의 초기투자율($\mu_{i}$)과 겉보기밀도($\rho$)의 관계를 $\mu_{i}=a+b_{\rho}+c_{\rho}^2$와 같이 실험식으로 표현할 수 있었다.

• 비파괴검사학회지
• /
• 제31권1호
• /
• pp.32-39
• /
• 2011

본 연구에서는 Cu와 Cu-Zn 합금의 저주기 피로 동안 발달한 전위 하부조직의 변화를 비파괴적으로 구분하고 평가하고자 하였다. 비파괴시험으로 초음파속도, 전기비저항 그리고 양성자소멸시간을 측정하였다. 서로 다른 적층결함 에너지를 갖는 Cu와 Cu-Zn에 대해 반복피로시험을 수행하고 이들 재료에서의 전위거동과 비파괴평가 파라미터와의 상관성을 연구하였다. Cu는 전위셀 하부구조를 형성하였지만, Cu-Zn 합금은 피로 사이클에 따라서 전위밀도는 증가하고 단지 평면배열의 전위구조를 형성하였다. 상온에서의 반복적인 피로에 의해 발달한 격자결함인 전위와 공공으로 인해 초음파속도의 감소, 전기비저항의 증가 그리고 양성자 소멸시간이 증가하였다. 비파괴평가파라미터의 지속적인 변화를 보이는 평면배열의 전위구조를 갖는 Cu-Zn에서와 달리, Cu에서는 전위셀구조가 발달하면서 더 이상의 큰 변화를 보이지 않았다.

• 대한화학회지
• /
• 제38권9호
• /
• pp.632-639
• /
• 1994

가시부 영역에서 산화아연을 광증감시키기 위해 copper phthalocyanine(CuPc)과 sunfast yellow(SY)를 산화아연 분말에 이층 흡착시켰다. 산화아연에 대한 CuPc의 흡착상태를 알기 위하여 ZnO/CuPc의 광음향, IR 및 라만 스펙트럼을 측정한 결과, CuPc는 $\alpha$형 및 $\beta$형의 결정 특성을 유지한 이합체 또는 분자들의 집합체 상태로 산화아연에 흡착된다는 것을 알았다. 산화아연에 CuPc 및 SY를 순차적으로 이층 흡착시킨계(ZnO/CuPc/SY)는 SY를 먼저 흡착시킨 ZnO/SY/CuPc계보다 광기전력이 높게 나타났고, $ZnO/\beta-CuPc/SY$는 $ZnO/\alpha-CuPc/SY$보다 광기전력이 높게 나타났다. $ZnO/\beta-CuPc/SY$의 전자사진 감도를 측정하였더니 630 nm에서 $$S_{1/2}=2.99{\times}10^{-2}(erg/cm^2)^{-1}$ 이었다.

• 한국재료학회지
• /
• 제23권6호
• /
• pp.304-308
• /
• 2013

The effect of a sputter deposition sequence of Cu, Zn, and Sn metal layers on the properties of $Cu_2ZnSnS_4$ (CZTS) was systematically studied for solar cell applications. The set of Cu/Sn/Zn/Cu multi metal films was deposited on a Mo/$SiO_2$/Si wafer using dc sputtering. CZTS films were prepared through a sulfurization process of the Cu/Sn/Zn/Cu metal layers at $500^{\circ}C$ in a $H_2S$ gas environment. $H_2S$ (0.1%) gas of 200 standard cubic centimeters per minute was supplied in the cold-wall sulfurization reactor. The metal film prepared by one-cycle deposition of Cu(360 nm)/Sn(400 nm)/Zn(400 nm)/Cu(440 nm) had a relatively rough surface due to a well-developed columnar structure growth. A dense and smooth metal surface was achieved for two- or three-cycle deposition of Cu/Sn/Zn/Cu, in which each metal layer thickness was decreased to 200 nm. Moreover, the three-cycle deposition sample showed the best CZTS kesterite structures after 5 hr sulfurization treatment. The two- and three-cycle Cu/Sn/Zn/Cu samples showed high-efficient photoluminescence (PL) spectra after a 3 hr sulfurization treatment, wheres the one-cycle sample yielded poor PL efficiency. The PL spectra of the three-cycle sample showed a broad peak in the range of 700-1000 nm, peaked at 870 nm (1.425 eV). This result is in good agreement with the reported bandgap energy of CZTS.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.19-24
• /
• 1997

적층형 chip inductor 소재인 NiCuZn ferrite의 제조 공정 조건 및 조성을 선정하였다. NiCuZn ferrite의 NiO 함량이 증가할 수록 저온 소결에 필요한 Fe$_{2}$O$_{3}$ 결핍량은 점차 증가하였고, NiO 함량과 Co$_{3}$O$_{4}$ 첨가량을 변화하여 투자율을 12 ~ 562 범위에서 제어할 수 있었다. NiCuZn ferrite의 투자율이 562에서 60으로 변화함에 따라서 Q$_{max}$ 주파수는 3 MHz에서 50 MHz 범위로 제어할 수 있었다. 이때 Q$_{max}$ 주파수(Y)와 투자율(X)은 log Y = 4.2-1.4 log X의 상관관계를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.134-137
• /
• 2009

Commercially available elemental powders of Cu, Zn, Sn and Se were employed for crystallizing a stannite-type $Cu_2ZnSnSe_4$ compound by means of solid state reaction. $Cu_2ZnSnSe_4$ reaction chemistry was also modeled based on differential-thermal analysis and X-ray powder diffraction results. It was observed that Se tends to react preferably with Cu to form CuSe and $CuSe_2$ phases at low reaction temperature. The formation of $Cu_5Zn_8$ intermetallic phase was found to be the intermediate reaction path for the binary ZnSe formation. A solid state reaction at $320^{\circ}C$ reacted elemental powderst obinary selenides of CuSe, ZnSe and SnSe completely. The crystallization of $Cu_2ZnSnSe_4$ was was detected to begin at $300^{\circ}C$ and its weight fraction increased with an increase of reaction temperature, which most probably formed from the reaction between $Cu_2SnSe_3$ and ZnSe.

• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.67-71
• /
• 1987

This study was intended to investigate the content of Cu, Mn, Zn in the dried milk powders except infant formula milkpowder from January to March, 1986. The content of the trace metals was determined by Atomic Absorption Spectrophotometry. The results were as follows: 1. Averages of Cu, Mn, Zn in the total samples were Cu, 0.3043 ppm Mn, 0.5101 ppm Zn, 26.006 ppm. 2. Averages and ranges of Cu, Mn, Zu in the whole milk powder were Cu, 0.2483, 0.216 - 0.48 Mn, 0.552 ppm, 0.336 - 0.732 ppm Zn, 28.961 ppm, 7.5 - 51.9 ppm. 3. Averages and ranges of Cu, Mn, Zn in the skim milk powder were Cu, 0.4095 ppm, 0.3 - 0.54 ppm Mn, 0.6907 ppm, 0.348 - 0.84 ppm Zn, 38.381 ppm, 30.6 - 55.2 ppm. 4. Averages and ranges of Cu, Mn, Zn in the modified milk powder were Cu, 0.3459 ppm, 0.12 0.948 ppm Mn, 0.2414 ppm, 0.096 - 0.348 ppm Zn, 7.752 ppm, 1.2 - 17.002 ppm. 5. It showed the highest amount of Cu, Mn, Zu in the skim milk powder group than in the other group and the lowest amount of Cu in the whole milk powder group and Mn, Zn in the modified milk group.