• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.41-44
• /
• 1998

Dual mode resonators were fabricated using high temperature superconductor. The deposited material was $Y_1Ba_2Cu_3O_{7-x}$(YBCO) on MgO(100) substrate using pulsed laser deposition. Dual mode resonators were patterned by standard photolithography process and wet etching. At the back-side of the substrate, the ground plane with the metal layer of Ti and Ag was fabricated. The transition temperatures of YBCO films were 85-88 K, and network analyzer was used for testing the performance of the resonators. The input/output feedline angles of each resonator were $60^{\circ}$and $100^{\circ}$. The resonant frequency of resonators was 10 GHz. In this paper, dual mode resonator was fabricated for the application of satellite communication.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.549-554
• /
• 2002

Recently, interest in hygiene has been arouse in the health care field. Consequently, Filters with antibacterial agent applied to improve air quality by sterilizing bacteria, fungi, etc. We actually installed antibacterial air filter containing 2.5wt%Ag zeolite on the air intake route to air-conditioner in passenger cu, and evaluated filter's performance on antibacterial effect. By the microbe liquid spattering method, we found that the antibacterial air filter has notably sufficient antibacterial efficiency against standard strains and wild type strains. Antibacterial effect was observed at whole area of filter media by zone of inhibition test. The evaluation of microbe quantity was conducted through mixing dilution plate culture method. In comparison with ordinary filter, the amount of germs attached on antibacterial air filters was larger. The amount of germs attached on ordinary filters was very small since ordinary filters contained less dust. In comparison in antibacterial air filter with thickness, the amount of germs attached on 9mm filter was smaller than that of on 6mm filter. i.e. thicker filter, superior efficiency.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.7-13
• /
• 2019

Power module is getting attention from electronic industries such as solar cell, battery and electric vehicles. Transient liquid phase (TLP) boding, sintering with Ag and Cu powders and wire bonding are applied to power module packaging. Sintering is a popular process but it has some disadvantages such as high cost, complex procedures and long bonding time. Meanwhile, TLP bonding has lower bonding temperature, cost effectiveness and less porosity. However, it also needs to improve ductility of the intermetallic compounds (IMCs) at the joint. Wire boding is also an important interconnection process between semiconductor chip and metal lead for direct bonded copper (DBC). In this study, TLP bonding using Sn-based solders and wire bonding process for power electronics packaging are described.

• Journal of Magnetics
• /
• v.4 no.3
• /
• pp.102-106
• /
• 1999

Ce exhibits the intermediate valence (IV) state both as an element and in its compounds. In the present review characteristic behavior of the materials showing the IV state are described. Then the methods of producing this state : the application of the external pressure, temperature and magnetic field as well as the alloying are being discussed. An identification of the IV state is frequently not a simple goal and the best results can be obtained using a combination of various independent methods. Particular attention is paid to the X-ray spectroscopy, lattice parameters and the magnetic properties. As the examples of the IV state in the Ce compounds the properties of following materials are reported : CeRhSb, $CeCu_5In_7, CeAg_6In_6, Sc_{1-x}Ce_xFe_4Al_8 $and for comparison Sc1-xYbxFe4Al8.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.49-54
• /
• 1989

The purpose of this study was to investigate the interfacial elemental change when solding the Ni-Co-Cr dental removable partial denture alloy and Fe-Cr-Ni wrought wire alloy with Ag-Cu-Zu Silver solder, by EDXA, EPMA, to investigate the appropriateness of clinical usefullness for repair the fractured clasps of removable partial dentive. The result of this study was as follows: 1. The Ni element of major component of Ticonium penetrate into the silver solder 2. The movement Age element of silver solder into Fe-Cr-Ni wire was not significant, by EDXA and EPMA.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.448-454
• /
• 2001

The contents of heavy metals in boiled Sibjeonaebotang with those in its herbal ingredients are compared. The herbal medicines of Sibjeonaebotang were bought at 10 defferent markets. The contents of 14 heavy metals (Ag, As, Ba, Cd, Cr Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, Zn) were analysed using ICP It was found out that 5 heavy metals (Pb, As, Ba, Fe, Sb) were detected in only one boiled Sibjeonaebotang But they were detectable in all Sibjeonaebotang and its herbal before boiling. For example the content of Hg in one pack of Sibjeonaebotang before boiling was 0.064$\pm$0.016 me and Hg in boiled one was 0.002$\pm$0.005mg. These results suggest that boiled Sibjeonaebotang which we take is less harmful than herbal medicine itself by heavy metals.

• Ceramist
• /
• v.21 no.1
• /
• pp.12-23
• /
• 2018

As the flexible displays have been considered as a breakthrough to make a new electronics category, transparent electrodes have also confronted with an emerging issue, i.e., they also need to be mechanically flexible. For this to be made possible, a transparent electrode capable of withstanding large amounts of strain must be developed. Indium tin oxide (ITO) has been one of the most widely adopted transparent electrodes for displays and other transparent electronics, mainly supported by its high electrical conductivity and optical transparency. However, its brittle nature has forced the display industry to search for other alternatives. Recently, advances in nano-material researches have opened the door for various transparent conductive materials, which include carbon nanotube, graphene, Ag and Cu nanowire, and printable metal grids. Here we reviewed recently-published research works introducing flexible displays, all of which are employing the novel candidates for a conducting material.

• Microbiology and Biotechnology Letters
• /
• v.28 no.4
• /
• pp.219-222
• /
• 2000

To produce and utilize microbial cyclomaltodextrinase being industrially useful, we isolated an alkalophilic Bacillus strain from soil which was capable of degrading cyclodextrins. The newly isolated strain was aerobic, gram-positive, spore-forming, motile, rod shape(0.2~0.4$\times$1.4~4.4 $\mu\textrm{m}$), and 35.8 mol% of DNA base composition. Based on its morphological, phisiological, and biochemical properties, it was identified as alkalophilic Bacillus sp. KJ-133 and cultivated well in the ranges of $30~40^{\circ}C$ and pH 8.0~9.0 . The cyclomaltodextrinase of the strain showed maximal production after 48h of cultivation at $37^{\circ}C$, and the activity was inhibited by Ag2+, Hg2+, Cu2+, and p-chloromercuribenzoate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.187-187
• /
• 2011

지르코니아 ($ZrO_2$) 표면에 금속 (Au)으로 표면 코팅한 후 Ti-6Al-4V와 진공 브레이징 접합을 행하였다. 표면에 코팅한 Au 층의 영향을 비교 분석하기 위하여 Au를 코팅하지 않은 지르코니아도 모재로 사용하였다. 접합소재로는 Ag-Cu-Ti계 active filler를 사용하였다. $ZrO_2$/Ti-6Al-4V 브레이징 결과, active filler는 양측 모재 표면에 wetting 되었으며, Ti-6Al-4V 내부로 filler 확산으로 인하여 두 모재의 direct joint가 관찰되었다. 접합 계면 사이에 접합부 결함은 관찰되지 않았다.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.3
• /
• pp.251-257
• /
• 1998

Cycloinulooligosaccharide fructanotransferase (CFTase) which produces cyclofructan from inulin was purified 332-fold from a culture broth of Bacillus macerans CFCl. The molecular mass of the CFTase was estimated to be 110 kDa by SDS-polyacrylamide gel electrophoresis and gel filtration, indicating that the enzyme has a monomer structure. The maximal level of enzyme activity was observed at pH 7.5 and $45^{\circ}C$. The enzyme was stable in the pH range 6.0 to 9.5, and at temperatures up to $45^{\circ}C$ for 1 h. The enzyme activity was completely inhibited in the presence of 0.5 mM $Ag^+\;or\;Cu^2+$ ion. None of sucrose (GF), l-kestose (GF2), or nystose (GF3) were found to be substrates for the CFTase, but inulooligosaccharides larger than nystose were attacked by the enzyme. The CFTase catalyzes not only the cyclization as the major reaction, but also disproportionation and coupling reactions involving intermolecular transfructosylation in the same manner as cyclodextrin glucanotransferase (CGTase) (EC 2.4.1.19).