• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.174-174
• /
• 1999

Pt(001)의 깨끗한 표면은 재배열된 (5x20) 또는 (nxn) 구조를 갖는다. 이러한 재배열된 구조는 소？의 가스를 흡착에 대해서도 (1x1)구조로 다시 재배열되는 재배열인 쉽게 풀리는 준안정적 재배열 구조를 갖는 표면이다. Pt(100) 표면 위에 Ni과 같은 금속을 흡착시키는 경우도 동일하게 표면의 장력을 해소시켜 (1x1) 표면을 만든다. Pt와 Ni과 같은 덩어리 상태에서 Pt와 Ni가 질서있게 교차되어 배열되는 합금이 쉽게 이루어지는 물질들로 잘 알려져 있고, 이 합금은 Pt나 Ni와 동일한 규칙적인 fcc 구조를 갖는다. 따라서 Pt(100) 표면 위에 Ni를 흡착시키는 것은 Nm/Cu(100)과 같은 표면합금이나 Mn/Ag(1000에서 보이는 2층으로 된 표면 합금과 같은 표면 근방에 국한된 질서있는 표면 합금의 가능성이 있다. 또한 Ni/Pt(100)은 Ni과 Pt가 3대 1의 비로 조합될 때 나타나는 Ni3Pt의 층별구조인 표면에 Ni가 채워져 있고, 다음 층에 Ni와 Pt가 50%씩 질서 있게 섞여 있는 형태의 구조 즉 표면 밑 합금이 나타날 수 있는 가능성이 있는 물질계라는 점에서 관심을 갖게 한다. 본 연구는 LEED를 이용하여 Ni/Pt(100) 박막의 층별구조를 확인하고자 한다. PtNi 합금은 ATA(average t-matirx approximation)을 이용한 LEED 분석이 잘 적용되는 물질계로 알려져 있고, 본 연구는 ATA를 적용한 LEED I/V 분석을 통하여 Ni가 성장된 Pt(100) 표면의층별 농도비와 층별 구조를 구하고자 한다. 실험은 기본 압력이 3x10-11torr인 챔버에서 이루어졌으며, 증착시 압력은 5x10 torr이고, 증착은 열증발 방법을 이용하였다. Ni가 증착됨에 따라 (nxn) 재배열 표면에 기인한 extra spot들의 세기는 점차 감소하고 특정 증착량 이상에서부터 이 (nxn)의 spot들이 사라지고 깨끗한 (1x1) 패턴이 나타난다. 계속되는 증착량의 증가에 대해서도 이 (1x1) 형태는 유지되며, 표면의 질서에 따르는 c(2x20 패턴은 보이지 않았다. (1x1) LEED spot를 보임에도 불구하고 덩어리 절단 형태의 구조를 기반으로 한 LEED I/V 분석으로는 잘 맞출수 없었다. 이것은 Ni가 일정 이상 흡착된 경우 그 구조가 덩어리 절단 형태의 fcc(100) 구조와 벗어난 구조를 가지는 것으로 보인다.

• Carbon letters
• /
• v.8 no.4
• /
• pp.274-279
• /
• 2007

In order to understand the breakthrough behaviour of iodine vapours on impregnated carbon systems, an active carbon, 80 CTC grade, $12{\times}30$ BSS particle size and $1104\;m^2/g$ surface area, was impregnated with metal salts such Cu, Cr, Ag, Mo and Zn, and an organic compound Triethylene diamine (TEDA) to prepare different carbon systems such as whetlerite, whetlerite/TEDA, whetlerite/KI/KOH and ASZMT. The prepared adsorbents along with active carbon were characterized for surface area and pore volume by $N_2$ adsorption at liquid nitrogen temperature. These carbon systems were compared for their CT (concentration X time) values at 12.73 to 53.05 cm/sec space velocities and 2 to 5 cm carbon column bed heights. The carbon column of 5.0 cm bed height and 1.0 cm diameter was found to be providing protection against iodine vapours up to 5.5 h at 3.712 mg/L iodine vapour concentration and 12.73 cm/sec space velocity. The study clearly indicated the adsorption capacities of carbon systems to be directly proportional to their surface area values. Dead layer with all the prepared carbon systems was found to be less than 2.0 cm indicating it to be minimum bed height to have protection against $I_2$ vapours. Effect of carbon bed height and flow rate was also studied. The active carbon showed maximum protection at all bed heights and flow rates in comparison to all other impregnated carbon systems, showing that only physical adsorption is responsible for the removal of iodine vapours.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.69-78
• /
• 2000

The microstructure and corrosion behavior of commercially dental casting gold alloys were investigated to clarify the effect of burn-out temperature and cooling rate. In the case of water quenching after casting, only the αphase, which is typical dendritic microstructure of golda alloy, was detected. However, the precipitates along the grain boundary were detected only at the slow cooling rate and they increased inversely proportional to the burn-out temperature. This might be due to the time difference which solute atom could diffuse. EPMA and SEM results also demonstrated that the precipitate should be lamellar structure consisted of Ag rich phase(${\alpha}_1$) and Cu rich phase (${\alpha}_2$). In terms of corrosion, the galvanic coupling was formed due to the difference of composition between precipitates and matrix at the slow cooling rate. In the case of water quenching, the critical current density($i_p$) which indicate the degree of corrosion was lowest at $650^{\circ}C$ and below the burnout temperature, $i_p$ increased with it because of the effect of grain boundary segregation. But above the temperature, $i_p$ increased with it. This may be due to the strain field effect by residual thermal stress.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.31-37
• /
• 2008

A variety of the porcelain fused to gold(PFG) have been developed to which porcelain can be fused. PFG alloys developed for this purposed have a high melting point and do not discolor when combined with porcelain. The design of the compositions of PFG is very important to esthetic restorative materials applying to porcelain. The purpose of this study is on the change of physical and mechanical characteristics in PFG 18K alloy by the small additional elements. Principal results are as follows. The high Au alloy containing 18Karat gold contents is respectively Au(75%), Pd(10%), Pt(4%), Ag(4%), In(2%), Sn(2%), Cu(2%), Ti(1%). These alloys are composed mainly of gold, platinum, silver and palladium with a few percent of the additional elements. By the addition of small amounts of elements such as In, Sn, Ti, the fine grain castings are produced in gold alloy and the small addition of platinum is very effective in increasing of hardness and strength. These gold alloys are representative of the changes to be expected as a result of heat treatment. These changes in strength and hardness values are sufficient to demonstrate a significant difference in performance between a as-casted and a heat-treated. These alloys have mechanical properties characteristics of Type and Type gold alloys. These alloys are useful to porcelain-metal restorations and dental laboratory. Also the porcelain fused to metal(PFM) alloys containing gold are commonly use for dental purposes in dental laboratory.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.237-240
• /
• 2016

The improvement of irradiation intensity and irradiation uniformity is essential for large area and high power UVA light source application. In this study, large number of chips bonded by micro soldering technique were driven by low current, and current limiting diodes were configured to supply constant current to parallel circuits consisting of large number of series strings. The dimension of light source module circuit board was $350{\times}90mm^2$ and 16,650 numbers of 385 nm flip chip LEDs were used with a configuration of 90 parallel and 185 series strings. The space between LEDs in parallel and series strings were maintained at 1.9 mm and 1.0 mm distance, respectively. The size of the flip chip was $750{\times}750{\mu}m^2$ were used with contact pads of $260{\times}669{\mu}m^2$ size, and SAC (96.5 Sn/3.0 Ag/0.5 Cu) solder was used for flip chip bonding. The fabricated light source module with 7.5 m A supply current showed temperature rise of $66^{\circ}C$, whereas irradiation was measured to be $300mW/cm^2$. Inaddition, 0.23% variation of the constant current in each series string was demonstrated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.29-42
• /
• 1986

This study is an experimental research on the adsorption capacity and the adsorption system utilizing Discarded Automotive Tires(DAT) and Powdered or Granular Activated Carbon(PAC or GAC) for the removal of heavy metals, Ag(I), Cd(II), Cu(II), Zn(II). Batch shaking test was conducted to determine the adsorption capacity of DA T and PAC in removing the heavy metals from aqueous wastes; and laboratory-scale column experiment was performed to present design factors affecting the optimum design of adsorption column with DAT and GAC, through the concept of Bed Deph/Service Time(BDST). As results, DAT has been proven to be a good adsorbent will its adsorption capacity not falling behind PAC or GAC. Factors affecting heavy metals removals were amount of adsorbents, initial concentrations, pH and so on. BDST equations were compared with values presented by the breakthrough data from adsorption system.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1546-1554
• /
• 2010

A bacterial strain capable of producing extracellular ${\alpha}$-galactosidase was isolated from a sample of sugarcane industrial waste. Microbiological, physiological, and biochemical studies revealed that the isolate belonged to Bacillus sp. Furthermore, based on a 16S rDNA sequence analysis, the new isolate was identified as Bacillus megaterium VHM1. The production of ${\alpha}$-galactosidase was optimized based on various physical culture conditions. Guar gum and yeast extract acted as the best carbon and nitrogen sources, respectively. The optimum pH was 7.5 and the enzyme remained stable over a pH range of 5-9. The enzyme was optimally active at $55^{\circ}C$ and thermostable with a half-life of 120 min, yet lost 90% of its residual activity within 120 min at $60^{\circ}C$. One mM concentrations of $Ag^2$, $Cu^2$, and $Hg^{2+}$ strongly inhibited the ${\alpha}$-galactosidase, whereas the metal ions $Fe^2$, $Mn^{2+}$, and $Mg^{2+}$ had no effect on the ${\alpha}$-galactosidase activity, and $Zn^{2+}$, $Ni^{2+}$, and $Ca^{2+}$ reduced the enzyme activity slightly. When treated with the B. megaterium VHM1 enzyme, the flatulence-causing sugars in soymilk were completely hydrolyzed within 1.5 h.

• Economic and Environmental Geology
• /
• v.12 no.2
• /
• pp.79-93
• /
• 1979

Twenty five samples of the scheelite-powellite series from twelve Korean tungsten deposits of various geologic settings were studied mineralogically and geochemically. Variations in the trace-element contents of the scheelite minerals are considered in relation to geologic settings and mineralogic properties. Scheelites from ore deposits developed in similar geologic settings and under similar physicochemical conditions are characterized by specific combinations of trace elements.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.507-514
• /
• 1994

Acetyl xylan esterase was produced by E. coli HB101 harboring a recombinant plasmid pKMG6 which contained the estI gene of Bacillus stearothermophilus. The maximum production was observed when the E. coli strain was grown at 37$\circC for 12 hours in the medium containing 0.5% acetyl xylan, 1.0% tryptons, 1.0% sodium chloride, and 0.5% yeast extract. The esterase produced was purified to homogeneity using a combination of ammonium sulfate fractionation, DEAE Sepharose CL-6B ion exchange chromatography and Sephacryl S-200 gel filtration. The native enzyme had an apparent molecular mass of 60 kd and was composed of two identical subunits of 29 kd. The N-terminal amino acid sequence of the polypeptide was Ala-X-Leu-Gln- Ile-Gln-Phe-X-X-Gln. The acetyl esterase displayed a pH optimum of 6.5 and a temperature opti- mum of 45$\circC. The heavy metal ions such as Ag$^{++}$, Hg$^{++}$ and Cu$^{++}$ inhibited nearly completely the activity of the esterase, and no specific metal ion was found to be required for the enzyme activity. The enzyme readily cleaved MAS, $\beta$-D-glucose pentaacetate, $\alpha$-naphthyl acetate, $\rho$-nitrophenyl acetate as well as acetyl xylan, but had no activity on $\rho$-nitrophenyl propionate, $\beta$-nitrophenyl butyrate or $\beta$-nitrophenyl valerate. The Km and Vmax values for MAS were 2.87 mM and 11.55 $\mu$mole/min, respectively. Synergistic behavior was demonstrated with a combination of xylanase and esterase from B. stearothermophilus in hydrolyzing acetyl xylan.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.150-155
• /
• 1992

- Some properties of an extracellular cytosine deaminase excreted from an isolate from soil samples were examined after 20~80%' ammonium sulfate fractionation. The enzyme catalyzed the conversion of cytosine and 5-fluorocytosine into uracil and 5-fluorouracil by substrate specificity, respectively. The optimum temperature and storage time on the stability of the enzvme preparation were below $50^{\circ}C$ keeping above 90% of the residual activity and near 4 days keeping above 80% of the residual one in Tris-HCI buffer. The maximum activity was also obtained at 8.0 in pH and 37'C in temperature. The pHs and temperatures for enzyme activity ranged from 8.0~8.5 and from 37~$45^{\circ}C$. respectively. The presence of $Ag^-,Hg^{2-}, Zn^{2-}, Cu^{2-}, Sn^{2-}, \; or\; Pb^{2-}$ in the reaction mixture resulted in the marked inhibition in enzyme activity, but 1 mM of $K^+, Fe^[3+}, Mg^{2+}, \; or \; Na^+$. slightly increased the activity. The enzyme preparation was heavily affected by most of inhibitors tested such as 1 mM of EIITA, NaCN and pentachlorophenol, and completely inactivated by p-CMB and TCA of 1 mM, or 10 mM.