• The Korean Journal of Food And Nutrition
• /
• v.16 no.2
• /
• pp.152-157
• /
• 2003

Serratia marcescens ATCC 25419 protease was purified to homogeneity by ammonium sulfate treatment, and DEAE-cellulose anion exchange chromatography. The specific activity of the enzyme was increased 448-fold during purification with an overall yield of 43.0%. Metal reactivation on the purified protease from S. marcescens was studied. S. marcescens protease was a metalloenzyme to be completely inhibited its activity by EDTA and the enzyme outstandingly inhibited by Hg, Fe, Cu, but the activity was increased approximately 20% by Co. The reactivation of the apoenzyme was effective with Mn, Co, Zn in pH range from 6 to 8. Among metalloenzymes prepared to the addition of Mn, Co, Zn to restore the degree of activity of native enzyme, Zn-enzyme was similar to the native enzyme in respects with enzyme activity, alkali-inactivation, thermo-stability.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.714-720
• /
• 2016

We performed this study to understand the effect of a single-crystalline anode on the mechanical properties of as-deposited films during electrochemical deposition. We used a (111) single- crystalline Cu plate as an anode, and Si substrates with Cr/Au conductive seed layers were prepared for the cathode. Electrodeposition was performed with a standard 3-electrode system in copper sulfate electrolyte. Interestingly, the grain boundaries of the as-deposited Cu thin films using single-crystalline Cu anode were not distinct; this is in contrast to the easily recognizable grain boundaries of the Cu thin films that were formed using a poly-crystalline Cu anode. Tensile testing was performed to obtain the mechanical properties of the Cu thin films. Ultimate tensile strength and elongation to failure of the Cu thin films fabricated using the (111) single-crystalline Cu anode were found to have increased by approximately 52 % and 37 %, respectively, compared with those values of the Cu thin films fabricated using apoly-crystalline Cu anode. We applied ultrasonic irradiation during electrodeposition to disturb the uniform stream; we then observed no single-crystalline anode effect. Consequently, it is presumed that the single-crystalline Cu anode can induce a directional/uniform stream of ions in the electrolyte that can create films with smeared grain boundaries, which boundaries strongly affect the mechanical properties of the electrodeposited Cu films.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.447-454
• /
• 2021

This study was conducted to evaluate the effects of different copper sources (inorganic and organic) on the growth performance, fecal copper excretion, intestinal morphology, and health in growing pigs. A total of 40 growing pigs (30.22 ± 1.92 kg) were randomly assigned to 5 dietary treatments: a basal control diet (CON), 4 experimental diets supplemented with either copper sulfate (CuSO₄), Cu-glycine complex (CuGly), Cu-amino acid complex (CuAA), or Cu-hydroxy-4-methylthio butanoate chelate complex (CuHMB) at 100 ppm, respectively. At the end of the study (28 days), fecal and blood samples were collected, and the pigs were slaughtered to determine the intestinal morphology. During the 28 days of the experimental period, pigs fed the inorganic and organic copper showed a higher average daily gain (p < 0.01) and gain feed ratio (p < 0.01). There were no differences in mineral concentrations of the serum; however, the copper concentration of the feces was lower (p < 0.01) in the CuAA and CuHMB groups. The intestinal morphology and blood profiles did not significantly differ between the groups. In conclusion, the organic copper sources (CuAA and CuHMB) can be used as a growth promoter to replace the CuSO₄ without any negative effects on health in growing pigs and to reduce fecal copper excretion.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.25-34
• /
• 1999

The effects of copper on the anaerobic degradation of propionate were studied using anaerobic batch reactors. The apparent inhibitory effects of copper on the anaerobic degradation of propionate could be observed from behaviors of intermediates, ultimate methane yield(UMY) and specific methanogenic activity(SMA) There was little inhibition at the concentration of $2.5mg\;Cu^{2+}/L$. Beyond this concentration, the inhibitory effects increased with increasing dose of coppers. The 50% inhibition of UMY and SMA occurred at copper dosage of 33.8 and $24.1mg\;Cu^{2+}/gVSS$, respectively. The inhibitory effect based on the UMY was gradually reduced with the operation time dueprobably to the acclimation of microorganisms and/or binding of the added copper by ligands(and possibly ion exchange sites)contained on the cell membrane and extracellular polymer matrix whereas it based on the SMA might exclude the this phenomena. Therefore, the methodology for interpretation of inhibition data based on the SMA was more accurated than the UMY. There was no inhibitory effect in batch reactors supplemented with sulfate due to an antagonistic action of the sulfate reducing bacteria. Propionate degradation was initially retarded for copper inhibited samples but it gradually degraded afterward. Based on the mass removal considering take into account the propionate to acetate conversion, propionate degradation may appeal more affected than acetate. This result revealed that the hydrogenotrophic methanogens were the most affected by copper.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.72-80
• /
• 1996

A chitinase-producing bacterium, Serratia marcescens JM, was isolated from a seashore muds. A chitinase was purified by ammonium sulfate precipitation, affinity adsorption, hydroxylapatite and sephadex G-200 column chromatography. The chitinase obtained from Serratia marcescens JM was purified 42.2 folds with the overall yield of 7.1%. The purified chitinase showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular weight of the enzyme was 59,000 and the apparent kinetic parameters $K_m\;and\;V_{max}$ for the purified chitinase were 5.17 mg/mL and 39.8 unit/mL, respectively. The optimum pH and temperature of the purified chitinase were 7.0 and 50$^{\circ}C$, respectively and the purified enzyme was stable on pH 7.0 up to 50$^{\circ}C$. The enzyme were activated by $Cu^{2+},\;Ca^{2+}\;and\;Mg^{2+}$ and inhibited by $Hg^{2+}$ respectively. In addition, Cysteine increased the chitinase activity and EDTA, MIA, PCMB and SDS inhibited enzyme activities. Major cations, $MG^{2+},\;Ca^{2+},\;K^+\;and\; Na^+$ present in seawater slightly stimulated the chitinase activity.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.216-226
• /
• 2018

The combination dyeing have been attempted to get the various color. The objective of this research was to study the color developing effects on cotton fabrics dyed with persimmon, catechu and combination of the both by heat treatment process. These dye were applied on bleached cotton fabrics for the dyeing before post mordanting with aluminium potassium sulfate, copper sulfate, and iron sulfate. The various color changes on cotton fabric were measured by color spectrophotometer. The heat treatment of temperature around $150^{\circ}C$ for an hour can reach the highest color developing. The dyed fabrics with mordanting were heated for specific time period, which was compared without the mordanting. The post mordanted fabrics showed that more various colors can be obtained using combination dyeing. K/S values of dyed fabrics with Al, Fe, and Cu mordants were higher than the cases without mordants. The Cu mordanted fabric showed very effective color developing by the heating process. The fabrics dyed with catechu lowered L* value with little changes in a* and b* values, while the a* and b* values became higher with heat treatment. The fabrics dyed with persimmon has the lowest L* value and more changes in a*, b* value with heating process. Therefore, K/S values can be increased effectively by the combination dyeing of persimmon and catechu. Colorfastness to washing in color change was grade 2-3 in non-mordanted fabric, and grade 3 in mordanted fabric. Lightfastness of the dyed fabrics was above grade 4.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.577-581
• /
• 1989

Activated Cu-Zn by the reaction of aqueous cupric sulfate and excess Zn showed the exceptional catalytic activity for the reduction of aromatic nitro compounds to the corresponding amino compounds in the presence of hydrazine monohydrate in ethanol. But, aliphatic nitro compounds were not reduced to the amino compounds.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.19-31
• /
• 2011

This study had been carried out to investigate spatial and temporal variations of the concentrations of trace metals for contaminated surface water in creek affected by leachate from the tailings impoundment of the Yeonhwa II mine for about 2 years. It was also to ascertain the metal removal efficiency for potentially deleterious metals by the artificial and natural attenuation processes such as retention ponds and hydrologic mixing of uncontaminated tributaries. The concentrations of As, Pb, Cd, and Cu for leachate in the rainy season were not detected. On the other hand, the concentrations of Zn, Fe, Mn, Al, and $SO_4^{2-}$ in the rainy season for leachate were 2-66 times higher than those in the dry season, due to the oxidation of the sulfide minerals and the dissolution of the secondary minerals. The concentrations of Zn and Cd for leachate and surface water of the upper creek in the rainy season exceeded the criteria of River Water Quality and Drinking Water Quality but in the dry season, those of analyzed all the metals (As, Pb, Cd, Cu, Zn, Cd, Fe, Mn, and Al) for surface water sampled at the study area were below the criteria of River Water Quality and Drinking Water Quality. In regard of the attenuation efficiency for the concentrations of metals, Fe, Mn, Al, Zn, Cd, As, and Cu were removed highly at retention ponds, while the removal efficiency for major cations and sulfate ($SO_4^{2-}$) were related to mixing of the uncontaminated tributaries. Therefore, the major attenuation processes of the metal and sulfate contents in creek affected by leachate from a tailing dump were precipitation (accompanied by metal co-precipitation and sorption), water dilution, and neutralization.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.3
• /
• pp.113-118
• /
• 2022

In this study, the effect of polyethylene glycol (PEG) on Cu electrodeposition was analyzed using cyclic voltammetry. The adsorption of PEG was affected by the specific adsorption of sulfate ion (SO₄^2-) or chloride ion (Cl^-). In SO₄^2--based plating solution, the adsorption of PEG was limited by the adsorbed SO₄^2-. Accordingly, the adsorbed PEG could suppress the electron transfer for Cu electrodeposition, but its effect was not significant. Meanwhile, in the plating solution composed of perchlorate ion (ClO₄^-) which does not specifically adsorb on Cu surface, a strong suppression effect of PEG was observed and it was proportional to the molecular weight of PEG. On the other hand, when Cl^- was specifically adsorbed on Cu surface, the suppression effect of PEG was enhanced because PEG and Cl^- formed an interrelated adsorbate. The synergetic effect of PEG and Cl^- depended on the composition of the plating solution, which means that the synergy between PEG and Cl^- is based on the physical interaction. For example, the hydrophobicity of PEG plays an important role in the interaction, as the suppression effect of PEG derivative having a hydrocarbon tail was further enhanced with the addition of Cl^-.