• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.23-29
• /
• 2019

A copper tetracumylphenoxy phthalocyanine (CuPccp) thin film was formed on an organic insulator film by Langmuir-Blodgett (LB) deposition for gas sensor fabrication. To increase the reproducibility of film transfer, stearyl alcohol was used as a transfer promoter. The structural properties of the CuPccp layers were optically monitored through attenuated total reflection and polarization-modulated ellipsometry techniques. The average thickness of a single layer of the CuPccp LB film was measured to be 2.5 nm. Despite the role of the transfer promoter, the stability of the layer transfer was not sufficient to ensure homogeneity of the LB film. This was probably due to the presence of aggregates in the molecular structure of the CuPccp LB film. Nevertheless, copper phthalocyanine polymorphism can be greatly suppressed by the LB arrangement, which appears to contribute to the improvement of electrical conductivity. The p-type semiconductor characteristics were confirmed by Hall measurements from the CuPccp LB films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.460-463
• /
• 2003

We report the microwave reflection coefficient $S_{11}$ of copper(II)-phthalocyanine(CuPc) using a near-field microwave microscope(NSMM) in order to understand the intrinsic electromagnetic properties of organic materials. For a NSMM system, a high-quility microstip resonator coupled with a dielectric resonator was used. The reflection coefficient $S_{11}$ was changed by the preparation conditions of CuPc thin films. We compared the reflection coefficient with crystal phase, surface morphology, UV absorption spectra and x-ray diffraction results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2003

We report the electrical properties of copper(II)-phthalocyanine(Cu-Pc) as a hole injaction layer in organic light-emitting diode (OLED). OLEDs were constructed by the following material structure : indium tin oxaide (ITO)/ CuPc/ triphenyl-diamine (TPD)/ tris-(8-hydroxyquinoline)aluminum (Alq3)/4-(Dicyanomethlene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)/ Al. we observed that the change of recombination zone by using a DCM detection thin layer (6 ${\AA}$) in a Alq$_3$ emitting layer. layer. Recombination zone was moved toward the cathode as the hole mobility increased due to the heat-treatment temperature of cupc layer increased.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.632-639
• /
• 1994

For dye sensitization of zinc oxide in the visible region, copper phthalocyanine(CuPc) and sunfast yellow(SY) were adsorbed in two layers on zinc oxide powder. The adsorption structures of $\alpha-and\beta-CuPc$ on zinc oxide were investigated by photoacoustic, IR and Raman spectra. The ${\alpha}-and\;{\beta}$-polymorphs exhibited dimeric structure or molecular aggregates. The surface photovoltaic effect of ZnO/CuPc/SY showed higher than that of ZnO/SY/CuPc and $ZnO/\beta-CuPc/SY$ indicated better photosensitive than $ZnO/\alpha-CuPc/SY.$ Electrophotographic sensitivity of $ZnO/\beta-CuPc/SY$ was $$S_{1/2}=2.99{\times}10^{-2}(erg/cm^2)^{-1}$ at 630 nm.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.3
• /
• pp.89-95
• /
• 1997

It is well known that the metallo-phthalocyanine(MPcs) are sensitive to toxic gaseous molecules such as $NO_2$ and also chemically and thermally stable. Therefore, lots of MPcs have been studied for the potential chemical sensor for $NO_2$ gas using quartz crystal microbalance or electrical conductivity. In this study, 2,3,9,10,16,17,23,24-[octa-(dodecyloxy)] copper phthalocyanine and 2,3,9,10,16,17,23,24-[octa-(octyloxy)] copper phthalocyanine were synthesized and their possibility of LB film preparation were tested. It was confirmed by using FT-IR, DSC, NMR, UV-Vis absorption spectroscopy and Elemental Analysis that CuPc derivatives were successfully synthesized. From the ${\pi}$-A characteristics and limiting areas of two CuPc derivatives it was found that the preparation of LB films with these CuPc derivatives is possible.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.671-675
• /
• 2014

Well-defined star shaped and linear block copolymers were synthesized to study the dispersion stability of copper phthalocyanine (CuPc). We synthesized dispersants using (2-dimethylamino) ethyl methacrylate (DMAEMA) and poly(ethylene glycol) methyl ether methacrylate) (PEGMA) by activators generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). pDMAEMA-b-pPEGMA copolymers were characterized by GPC and NMR. Furthermore, we studied the effect of the dispersion stability of copper phthalocyanine by controlling the degree of polymerization of PEGMA as a stabilizing group. The 4-arm star shaped polymeric dispersant showed better dispersion stability of CuPc at $25^{\circ}C$ for 7 days.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.303-304
• /
• 2009

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine. ($F_{16}CuPc$) as an active layer. And we observed the surface morphology of the $F_{16}CuPc$ thin film. The $F_{16}CuPc$ thin film thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.389-390
• /
• 2008

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine ($F_{16}CuPc$) as an active layer. And we observed the surface morphology of the $F_{16}CuPc$ thin film. The $F_{16}CuPc$ thin film thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.43-44
• /
• 2009

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine ($F_{16}CuPc$) as an active layer. And we observed the surface morphology of the $F_{16}CuPc$ thin film. The $F_{16}CuPc$ thin film thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.504-505
• /
• 2008

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine ($F_{16}CuPc$) as an active layer. And we observed the surface morphology of the $F_{16}CuPc$ thin film. The $F_{16}CuPc$ thin film thickness was 40nm, and the channel length was $50{\mu}m$, channel width was 3mm. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility.