• Economic and Environmental Geology
• /
• v.32 no.1
• /
• pp.63-72
• /
• 1999

In order to examine the contamination levels of trace elements in stream sediments in the Chungnam coal mine area, stream sediment and water samples were collected and analyzed for trace elements. The pH of stream water was neutral or weak-alkaline and the mobility of metal in stream sediments was supposed to be low. From the result of cluster analysis, non-polluted sampling stations can be distinguished from polluted sampling stations influenced by mining activities. The trace element concentrations in sediments from non-polluted zone were considered to be the natural backround concentrations of this area. The trace element concentrations in sediment samples from the mining area were higher than those from non-polluted area, and contaminated area of enriched trace element levels need to be properly managed. From the results of discriminant and regression analyses, concentrations of Cd, Cu, Pb AND zN and predicted values of Be, Mo, and Ni in Chungnam coal mine area were found to be lower than those in metal mining areas in Korea.

• Advances in nano research
• /
• v.4 no.3
• /
• pp.157-165
• /
• 2016

The photocatalytic (PC) activity of anatase titania nanoparticles can be improved through codoping with transition metals and nitrogen. In addition, the PC activity can also be improved by creating monodisperse, mesoporous nanoparticles of titania. The question naturally arose as to whether combining these two characteristics would result in further improvement in the PC activity or not. Herein, we describe the synthesis and photocatalytic characteristics of codoped, monodisperse anatase titania. The transition metals tested in the polydisperse and the monodisperse forms were Mn, Co, Ni, and Cu. In each case, it was found that the monodisperse version had a higher PC activity compared to the corresponding polydisperse version.

• Korean Journal of Plant Resources
• /
• v.3 no.2
• /
• pp.115-121
• /
• 1990

In view of the results to have measured metallic elements which is included in 40 sorts of herb medicines and surveyed their distribution, ninekinds of metals including Co, Ce, Ga, 71, Cd, As, Sbr Bu. Pb, are never orlittle included in almost herb medicines. Other twenty four sorts of ele-ments (Mo, Sc, Be, V, Ni, Su, Se, Ba, Cr, Su, Ti, B, Li, Mg, Ca, Sr, Mnl Fe,Cu, Zn. p, Al, Na, K) are metals that are included in large quentities incomparison with others. Selagirellae Radix contains is kinds of metallicelements more then other herb medicines does. The content of elements ofinorganic metal differs greatly according to the part of herb medicines .

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.309-310
• /
• 2005

Some minor elements(Al, B, Ba, Ca, Cd, Co, Cr, Cu, Gd, Mg, Mn, Mo, Nd, Ni, P, Pb, Si, Sn, Sr, Ti, V, Yb, Zn and Zr) in iron compounds such as the S/G sludge of a power plant were separated from iron by anionic and cationic exchange methods. If a ICP-AES or AAS determination follows this method, minor elements of more than 2 or 20 ppm of Fe can be determined with an error less than 20% except Sn and Mo. Alkaline elements were excluded from this study since they can be easily recovered from an anionic exchange. Application to real sludge samples is ongoing.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.246-251
• /
• 1999

The purposed of this study was to investigate the efficient recycling of food waste according to the restaurants type. To the investigated of characteristic of food wastes in different types of restaurants we were collected the sample of 60 as Korean 35 Chinese 10 Japanese 5 Western 5 Flour 5 in Swoon. The average water content of food waste was 79.9% and Korean restaurant was 80.3% which was hig-her than that of any other serving type. On the examination of a organic matter content of food waste according to the season crude fiber was higher in may and July crude protein content was higher in January and march than that other seasons. The average pH of food waste was 4,74 C/N ratio was 15.8 and the average cation content was K 0.57% Ca 0.39% Mg 0.22% NaCl 3.36% respectively The aver-age concentration of Fe, Zn, Pb, Cu, Cr, Cd Ni were 154.37 mg/kg 24.79 mg/kg 0.27 mg/kg 5.63 mg/kg 5.49 mg/kg, 0.31mg/kg 1.07mg/kg respectively.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.555-558
• /
• 2003

An enrichment/separation system for atomic absorption spectrometric determinations of Cu(Ⅱ), Fe(Ⅲ), Ni(Ⅱ) and Co(Ⅱ) has been established. The procedure is based on the adsorption of the analytes as calmagite chelates on Chromosorb-102. The effects of some parameters including pH, amount of ligand, salt matrix, flow rates of sample and eluent solutions were investigated. Under optimized conditions, the relative standard deviation of the combined method of sample treatment, preconcentration and determination with FAAS (N=5) is generally lower than 5%. The limit of detection (3σ) was between 6.0-112.9 ㎍/L. The results were used for preconcentration of analytes from some sodium and ammonium salt.

• YAKHAK HOEJI
• /
• v.47 no.6
• /
• pp.356-360
• /
• 2003

Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt (NRS) was used as an organic ligand to prepare basic drug-selective polymeric membrane electrode. The sensing membrane of the electrode consited of basic drug-meta1(II)-NRS as an ion-exchanger site in a poly(vinyl chloride) matrix plasticized with 2-nitrophenyl octyl ether (NPOE). The metal ions used were Fe$^{2+}$, Co$^{2+}$, Ni$^{2+}$ and Cu$^{2+}$. The electrodes exhibited fast and wide linear response in the basic drug concentration of 10$^{-5}$ ∼10$^{-3}$ mol/l with a response slope of 50∼60 mV/decade in a buffer solution of pH 4∼8. The electrodes exhibited good selectivity for many basic compounds.mpounds.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.381-382
• /
• 2006

A comparative study is made on root bending fatigue performance of spur gears and plane bending fatigue performance of notched test bars. R = 0 root bending fatigue tests are made on small spur gears with critical root radius 1.0 mm. The results are compared to plane bending fatigue tests of 0.9 mm radius notched specimens. Results are presented for tests on 4%Ni/2%Cu/1.5%Mo prealloyed PM steel with addition of about 0.6% graphite. Predicted values from the test bars coincide well with the results obtained from the gear root fatigue tests.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1337-1338
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, 0.07Pb$(Mn_{1/3}Nb_{2/3})O_{3}-xPb(Ni_{1/3}Nb_{2/3})O_{3}-(0.93-x)Pb(Zr,Ti)O_{3}$ ceramics system were fabricated using $Li_{2}CO_{3}-Bi_{2}O_{3}$-CuO sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter their piezoelectric and dielectric characteristics were investigated with the amount of PNN substitution. At 9[mol%] PNN substitution, electromechanical coupling factor (kp), mechanical quality factor (Qm) and piezoelectric constant ($d_{33}$) showed the optimum value of 0.60, 1323 and 387pC/N, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.61-66
• /
• 2008

Impact behavior of large SF590A (Fe-0.65C-1.5Mn-0.035P-0.035S-0.3Cr-0.15Mo-0.4Ni-0.3Cu) forged propeller shaft was studied in this study. Charpy impact specimens were prepared from the forged product with different heat number. The impact value of each specimen with different heat number tends to vary greatly depending on the prior austenite grain size and, less significantly, on the amount of sulfur. The dominant metallurgical factors affecting impact behavior of SF590A forged product are discussed based on fractographic and metallographic observations.