• 제목/요약/키워드: Cu Plate

검색결과 237건 처리시간 0.027초

개벌에 의한 수확벌채가 계류수질에 미치는 영향 (Influences of Clearcutting of Timber Harvesting on Stream Water Quality)

  • 박재현
    • 생태와환경
    • /
    • 제35권1호통권97호
    • /
    • pp.45-51
    • /
    • 2002
  • 이 연구는 성숙활엽수림 개벌수확이 계류수질에 미치는 영향을 구명할 목적으로 1993년부터 2001년까지 전남 광양 백운산 지역에 위치한 서울대학교 농업생명과학대학 부속 남부연습림내 제26임반에서 1993년부터2001년까지 계류수질에 영향하는 토양의 화학성분과 계류수질을 측정 ·분석한 결과, 벌채 후 1년, 2년이 경과되는 동안 전질소, 치환성 이온인 $K^+,\;Na^+,\;Ca^{2+},\;Mg^{2+}$등은 벌채 전보다 양적으로는 감소하였으나, 벌채 8년 후에는 벌채 전으로 점차 회복되는 것으로 분석되었으며, 토양의 화학성분은 변화하지 않았다. 벌채 당해년도와 그 다음 해, 그리고 벌채 5년, 8년 후 벌채지 계류수의 BOD, pH등은 하천수질환경기준 상수원수 1급수이었으며, Cd, Pb, Cu등 중금속과 유기인은 검출되지 않았다. 또한, 계류수의 색도, 탁도, 냄새, 맛, $NH_4\;^+-N,\;NO_3\;^--N$, 일반세균수, 대장균군 등 8개 항목은 먹는 물 수질기준에 적합하여 벌채지 인근지역 주민들이 음용수로 이용하는 데에는 영향이 없는 것으로 해석되었다. 계류수에 용존되어 있는 양이온총량, 음이온총량, 이온총량은 비벌채지와 벌채지가 합류하는 유역이, 비벌채지 유역과 벌채지 유역의 계류수 보다 높은 값을 나타내었으나, 그 값의 차는 크지 않았다.

성숙임목수확벌채가 토양의 화학성분과 계류수질에 미치는 영향 (The Effects of Timber Harvesting on Soil Chemical Ingredients and Stream Water Quality)

  • 박재현;우보명;김우룡;안현철;김재수
    • The Korean Journal of Ecology
    • /
    • 제23권1호
    • /
    • pp.9-15
    • /
    • 2000
  • 이 연구는 성숙활엽수림 개벌수확지에서 벌채로 인한 토양의 화학성분 및 계류수질에 미치는 영향을 구명할 목적으로 1993년부터 1998년까지 전남 광양 백운산 지역 천연활엽수림 벌채지(서울대학교 농업생명과학대학 부속 남부연습림내 제 26 임반)에서 수행하였다. 이 연구를 위하여 1993년에 벌채한 13ha의 벌채지와 이와 연접한 비벌채지를 조사?연구대상지로 선정하였다. 이 조사지 에서 1993년부터 1998 년까지 토양의 화학성분과 계류수질을 측정?분석한 결과, 벌채후 1년, 2년이 경과되는 동안 전질소, 치환성 이온인 K/sup +/, Na/sup +/, Ca/sup 2+/, Mg/sup 2+/은 벌채전 보다 양적으로는 감소하였으며, 벌채후 5년이 경과된 뒤에는 벌채 2년 경과후 보다 유의적으로 증가하였으나, 토양의 화학성분은 변화하지 않았다. 또한, 벌채 당해년도와 그 다음 해,그리고 벌채후 5년이 경과되었을 때 벌채지 계류수의 BOD, pH등은 하천수질환경기준에 의한 상수원수 1급 기준에 도달하였으며, Cd, Pb, Cu 둥 중금속과 유기인은 검출되지 않았다 계류수의 색도, 탁도, 냄새, 맛, NH/sub 4//sup +/-N, NO/sub 3//sup -/-N, 일반세균수, 대장균군 둥 8개 항목은 먹는 물 수질기준에 적합하여 벌채지 인근지역 주민들이 음용수로 이용하는 데에는 영향이 없는 것으로 해석되었다. 그러나 계류수질평가항목 중 BOD는 벌채후 1년, 2년이 경과되는 동안 하천수질환경기준에 의한 상수원수 1급 기준의 최고치인 1 ppm에 도달하는 둥 수질이 악화될 우려가 있기 때문에 대규모 산림 벌채계획은 계류수질보전 을 고려하여 시행하여 야 할 것으로 생각된다.

  • PDF

익산 미륵사지 석탑 사리공 내 출토 고대 유리 유물의 성분특성 분석 (Characteristic Analysis of Chemical Compositions for Ancient Glasses Excavated from the Sarira Hole of Mireuksaji Stone Pagoda, Iksan)

  • 한민수
    • 보존과학회지
    • /
    • 제33권3호
    • /
    • pp.215-223
    • /
    • 2017
  • 익산 미륵사지 석탑의 사리공 내에서 출토된 유리 유물 30점을 분석하여 이들의 성분특성과 상관성, 발색원소 등을 알아보고자 하였으며, 이를 왕궁리 출토 유리의 연구결과와 비교하여 상관관계를 검토하였다. 성분분석 결과, 유리구슬 24점은 $SiO_2$$Na_2O$ 성분을 다량 함유한 소다유리군에 속하며, 세부적으로 소다-알루미나유리계 ($Na_2O-Al_2O_3-CaO-Si_2O$)였다. 안정제로서 $Al_2O_3$, CaO, MgO가 첨가된 것으로 보이며, 이를 통해 LCHA(Low CaO, High $Al_2O_3$)형으로 분류할 수 있다. 착색물질은 Ti, Mn, Fe, Cu, Pb 등 성분이 발색에 영향을 준 것으로 판단된다. 나머지 6점은 모두 녹색계열의 유리판 또는 미상의 파편으로 PbO의 함량이 약 70wt.%, $SiO_2$의 함량이 약 30wt.%인 전형적인 $PbO-SiO_2$계의 납유리였다. 이들 유물을 동일 유적권인 왕궁리 출토 유리구슬의 성분과 비교한 결과, 일부 소다유리인 점은 유사하나 $Na_2O$의 함량이 상대적으로 미륵사지 유리 구슬이 매우 높고, 대부분 $K_2O$와 CaO의 함량이 낮다는 점이 다르다. 납유리의 경우도 PbO와 $SiO_2$ 함량이 약간 차이가 있다. 이는 두 유적지에서 제작된 유리 유물이 서로 다른 재료 또는 기술을 이용하였을 가능성도 있는 것으로 보인다.

산화된 low density lipoprotein (LDL)에 의해 유도된 내피세포의 손상에 대한 마늘 대사산물인 allylmercaptan의 보호 효과 (Protection Effects of Allylmercaptan, Metabolite of Garlic on Endothelial Cell Injury Induced by Oxidized Low Density Lipoprotein)

  • 양승택
    • 생명과학회지
    • /
    • 제20권11호
    • /
    • pp.1595-1602
    • /
    • 2010
  • Low density lipoprotein (LDL)의 산화는 동맥경화의 유발과 진행에 결정적 역할을 하는 것으로 알려져 있다. 본 연구에서는 마늘의 주요 대사산물인 allylmercaptan의 산화 low density lipoprotein에 의해 손상된 내피세포의 보호효과에 대하여 실험하였다. Allylmercaptan의 항산화 활성은 thiobarbituric acid substance (TBARS)로 측정하였다. Allylmercaptan은 0.1, 1 및 10 mM의 농도에서 $Cu^{2+}$에 의해 유도된 LDL의 산화를 용량의존적으로 억제하였다. 폐동맥 내피세포를 $37^{\circ}C$, 5% $CO_2$ 상태에서 24시간 동안 미리 배양시킨 후 세측한 다음 다시 24시간 동안 0.1 mg/ml oxidized LDL (ox-LDL)을 첨가하여 배양하였다. 이 때 ox-LDL이 Lactate dehydrogenase (LDH)의 방출과 glutathione (GSH)를 감소시키는 원인으로 세포막 손상의 지표로 LDH와 GSH 함량을 조사하였다. 본 실험 결과 allylmercaptan을 일정 농도 별로 endothelial cell에 첨가하여 배양했을 때 LDH의 방출과 GSH의 감소를 현저하게 억제하였다. Peroxide를 형광분석법으로 24 well plate에서 직접 측정한 결과 allylmercaptan이 폐동맥 내피세포 내에서 ox-LDL 유도 peroxide의 방출을 억제하였다. 그리고 allylmercaptan은 과산화수소의 소거능도 있었다. 본 실험결과 allylmercaptan은 ox-LDL 유도 폐동맥 내피세포를 보호할 수 있었으므로 allylmercaptan은 동맥경화의 예방에 유용할 것으로 생각된다.

회주철의 미세구조와 인장거동 분석 및 확률론적 피로수명평가 (Microstructure, Tensile Strength and Probabilistic Fatigue Life Evaluation of Gray Cast Iron)

  • 성용현;한승욱;최낙삼
    • 대한기계학회논문집A
    • /
    • 제41권8호
    • /
    • pp.721-728
    • /
    • 2017
  • 보통회주철(GC300)에 Cr, Mo, Cu 첨가제를 넣어 고급 회주철(HCI350)을 제작하고, 미세 조직과 기계적 물성치, 피로강도의 변화를 연구하였다. 주철을 환봉형과 평판형 주물로 제작하였으며, 이들을 절단 및 연마하여 나이탈 수용액으로 에칭한 후 미세조직의 면적비율을 측정하였다. 첨가물에 의해 편상 흑연결정(flake graphite)의 크기가 감소하고 고밀 펄라이트 함량이 증가하여 인장강도, 피로강도의 향상이 확인되었다. 피로시험 결과 획득한 피로수명 데이터를 바탕으로 최우추정법이 적용된 2모수 와이블 분포를 이용하여 확률-응력-수명 곡선을 산출하였다. 확률-응력-수명곡선 산출 결과 HCI350은 GC300에 비해 피로강도는 크게 개선되었고 수명데이터의 분산성은 낮아졌으나, 피로응력완화에 따른 피로수명의 증가가 크게 나타났다. 산출된 확률-응력-수명 곡선을 이용하여 요구수명 사이클 수에 대한 허용응력 값을 정량적으로 제시함으로써 신뢰성 수명설계에 위한 기초자료를 제시하였다.

한강의 오염도 (Han River Pollution Studies)

  • 최상
    • 한국해양학회지
    • /
    • 제7권1호
    • /
    • pp.24-45
    • /
    • 1972
  • The Han River is an important water source in Seoul and neighbouring districts, for public and industrial supply, and for agriculture and fishery. Nowadays, more than six million inhabitants are supplied withe water from this river. The total length of the river is 470km, and has 17 10$\^$9/㎥ an average annual flow. The hydrographic characteristics at Seoul are 653㎥/sec in an average flow, 4,608㎥/sec in the maximum average flow, and 201㎥/sec in the minimum average flow. These are influenced in some degree by snowmelt in early spring, and greatly by the flood during summer. For the pollution problems, the periods of low flow are critical ones. As a rule they occur around the months November through June. Nowadays, most of the sewage from towns and industries is discharged untreated. Apart from domestic and industrial sewages, there are some discharges of mineral matter by mines in the upriver region. In general, water quality of the Han River is kept very clean and healthy until Kwangnaru of the upper region of Seoul. A large pollution, however, is received in the downstream by the domestic and industrial sewages of Seoul. It can be seen that dissolved oxygen, COD and BOD$\sub$5/ diminish markedly, and the intensity of almost every water parameter of the river continues to increase. Comparison of the figures for 1971 derived from a sampling point 40km downstream of Kwangnaru leads to the conclusion that hardness, Ca and Mg were no changed; alkalinity, Si and soluble- Fe were slightly increased; CO$\sub$2/, acidity, Cl, NO$\sub$2/-N, Cu, Zn and Al were increased in 2 and 3 times; total residue, total ignitious residue, COD, BOD$\sub$5/, NH$\sub$4/-N, PO$\sub$4/-P, Mn, Pb and total-Fe were increased in 4 to 7 times; and SO$\sub$4/, particulate-Fe and Cd were increased in 10 to 11 times. On the other hand, coliforms were increased in 650 times; fecal coliforms in 365 times; enterococci and total plate counts in 30 times, respectively. In view points of water quality standards, the down Han River water is now leveling out in Cd, coliforms and fecal coliforms for the agricultural use; in dissolved oxygen and some trace elements (Cu, Zn, Pb and Cd) for the fishery use; in ammonia, COD, BOD$\sub$5/, and Cd for the drinking use.

  • PDF

운룡주(雲龍柱) 보물 앙부일구의 특성과 제작 기술 (Characteristics and Manufacturing Technology of the Angbuilgu Treasure with Plate Pillars Decorated with a Dragon in Clouds)

  • 윤용현;민병희;김상혁
    • 헤리티지:역사와 과학
    • /
    • 제56권4호
    • /
    • pp.24-37
    • /
    • 2023
  • 본 연구는 2022년에 새롭게 보물로 지정된 앙부일구의 재질과 외형적 특징을 분석하였다. 국립고궁박물관, 국립경주박물관과 성신여자대학교박물관의 세 기관에서 소장하고 있는 보물 앙부일구는 그 재질, 규격, 형태(외형), 은상감 등 제작기법이 쌍둥이처럼 비슷하다. 이 세 점의 앙부일구은 구리: 아연: 납이 90.6: 6.0: 1.8의 비율인 황동으로 제작되어 있다. 이 성분비는 82.2: 3.7: 11.8의 조성비를 가지고 있는 보물 제845호 앙부일구와 분명한 차이를 보인다. 새 보물 앙부일구에서 반구의 받침부분은 용의 문양이 수직기둥에 그려지고 구름의 문양이 기둥의 날개를 형성하여, 반구 지평환에 각각 리벳과 은땜으로 결합되어 있다. 이러한 운룡주(雲龍柱)의 문양은 조선 후기 제작된 다양한 앙부일구 받침대 중에서도 가장 뛰어난 조형미를 보여주고 있다. 앙부일구에 새겨진 북극고도는 1713년 이후에 제작되었음을 알 수 있는데, 실제 제작은 19세기 진주 강씨 앙부일구 전문제작자의 활동 시기에 근접할 것으로 추정된다. 본 연구가 2022년 지정 보물 앙부일구의 재질과 외형적 특징을 분석함으로써 근대 과학기기의 과학기술사적 고찰을 견인할 수 있기를 기대한다.

해외광물자원개발을 위한 최적 탐사기법과 동향 (Recently Improved Exploration Method for Mineral Discovery)

  • 최선규;안용환;김창성;서지은
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2009년도 특별 심포지엄
    • /
    • pp.57-65
    • /
    • 2009
  • Selection of good mineralized area is a combination of the integration of all the available geo-scientific (i.e., geological, geochemical, and geophysical) information, extrapolation of likely features from known mineralized terrenes and the ability to be predictive. The time-space relationships of the hydrothermal deposits in the East Asia are closely related to the changing plate motions. Also, two distinctive hydrothermal systems during Mesozoic occurred in Korea: the Jurassic/Early Cretaceous deep-level ones during the Daebo orogeny and the Late Cretaceous/Tertiary shallow geothermal ones during the Bulguksa event. Both the Mesozoic geothermal system and the mineralization document a close spatial and temporal relationship with syn- to post-tectonic magmatism. The Jurassic mineral deposits were formed at the relatively high temperature and deep-crustal level from the mineralizing fluids characterized by the relatively homogeneous and similar ranges of ${\delta}^{18}O$ values, suggesting that ore-forming fluids were principally derived from spatially associated Jurassic granitoid and related pegmatite. Most of the Jurassic auriferous deposits (ca. 165-145 Ma) show fluid characteristics typical of an orogenic-type gold deposits, and were probably generated in a compressional to transpressional regime caused by an orthogonal to oblique convergence of the Izanagi Plate into the East Asian continental margin. On the other hand, Late Cretaceous ferroalloy, base-metal and precious-metal deposits in the Taebaeksan, Okcheon and Gyeongsang basins occurred as vein, replacement, breccia-pipe, porphyry-style and skarn deposits. Diverse mineralization styles represent a spatial and temporal distinction between the proximal environment of sub-volcanic activity and the distal to transitional condition derived from volcanic environments. However, Cu (-Au) or Fe-Mo-W deposits are proximal to a magmatic source, whereas polymetallic or precious-metal deposits are more distal to transitional. Strike-slip faults and caldera-related fractures together with sub-volcanic activity are associated with major faults reactivated by a northward (oblique) to northwestward (orthogonal) convergence, and have played an important role in the formation of the Cretaceous Au-Ag lode deposits (ca. 110-45 Ma) under a continental arc setting. The temporal and spatial distinctions between the two typical Mesozoic deposit styles in Korea reflect a different thermal episodes (i.e., late orogenic and post-orogenic) and ore-forming fluids related to different depths of emplacement of magma (i.e., plutonic and sub-volcanic) due to regional changes in tectonic settings.

  • PDF

산란전자선을 이용한 강내측방조사기구의 제작과 특성 (Fabrication of Backscatter Electron Cones for Radiation Therapy)

  • 추성실;서창옥;김귀언
    • Radiation Oncology Journal
    • /
    • 제19권1호
    • /
    • pp.74-80
    • /
    • 2001
  • 목적 : 강내에 발생된 종양치료용 원통형 전자선 조사기구(Electron cone)는 기하학적으로 강내벽에 위치한 종양치료에 부적당하므로 후방 또는 측면방향으로 산란되는 전자선을 이용하여 체강 내벽점막 등에 발생된 종양을 효과적으로 치료할 수 있는 산란전자선 치료방법을 개발하고자 한다. 강내조사기구내에 전자선 입사방향에 수직 또는 일정한 각도의 산란판을 배치하여 측면방향으로 산란전자선을 방출시키는 강내 측면조사기구를 제작하고 산란판의 제원과 전자선 에너지에 따라 산란방출된 산란선의 특성과 조직내 선량분포를 측정 평가하였다. 새상 미 방법 : 외부조사용 전자선조사기구(Electron cone) 대신에 강내 삽입용 전자산란선 조사통(Intracavitary backscatter electron cone)과 이를 콜리메이터와 연결시킬 수 있는 차폐연결기구(Shielded electron device)를 고안하였다. 산란전자선 조사기구는 직경이 $2\~3\;cm$이고 길이가 25 cm인 금속(내식강)원통을 이용하였으며 입구에서 20 cm위치에 산란판을 부착시키고 원통 측면에 직경 $1\~2\;cm$의 산란선 방출구를 제작하였다. 산란판은 $2\~10\;mm$의 연판을 사용하였으며, 오제전자와 특성 엑스선을 제거하기 위하여 주석, 구리, 알루미늄판 등을 부착시켰으며 종양위치를 관찰할 수 있도록 표면을 처리하였다. 고에너지 방사선치료용 선형가속기(Clinac 2100C/D)에서 발생된 $6\~12\;MeV$ 에너지의 전자선을 이용하였으며 선량측정은 평행평판형 전리상(Markus chamber, PTW 23343)을 조직등가 팬텀(Polystyrene)에 삽입하여 측정하였다. 전자산란선의 에너지분포는 Monte Carlo (EGS4) 계산으로 예측하였으며 조직내 선량분포는 필름 흑화도(X-Omat V, Wellhofer 700i)에 의하여 측정하였다. 결과 : 전자선 입사에너지가 6 MeV일 때 전자산란선의 평균 에너지는 약 1.5 MeV 이었으며 산란각이 클수록 에너지는 줄어들었다. 입사 전자선 에너지 6 MeV 에서 산란판의 각도 $30^{\circ},\;45^{\circ}$ 에 따른 최대선량지점은 산란선 방출구의 중심에서 각각 5 mm 및 -10 mm지점의 표면에서 발생되며 입사전자선에 대한 전자산란선의 선량비는 약 $8.5\%$ 내외로 측정되었다. 입사전자선에너지 6 MeV에서 산란판각도 $45^{\circ},\;60^{\circ}$에 의한 $50\%$의 심부선량분포는 각각 6 mm와 7 mm 깊이에 도달하였으며 입사에너지 증가에 비례하였다. 결론 : 전자선 후방산란의 특성을 연구하고 이를 인체 강내 측방 점막부위에 발생한 종양을 효과적으로 치료할 수 있는 강내 전자산란선 조사통을 고안 제작 하였다. 시험용으로 제작한 전자산란선 조사기구를 이용하여 전자선 에너지와 산란판의 각도에 따른 산란선의 선량비율과 심부율을 측정하였다. 구강, 자궁, 직장 등 강내측벽 점막 등에 발생된 악성종양의 모양과 깊이에 가장 적당한 입사 에너지, 산란판의 각도, 산란창구 및 조사각도를 선택함으로서 방사선치료방법을 향상시킬 수 있을 것이라고 기대된다.

  • PDF

유무연 용융도금 리본에 따른 결정질 실리콘 태양전지 모듈 열화거동 (Degradation Behavior of Eutectic and Pb-free Solder Plated Ribbon in Crystalline Silicon Photovoltaic Module)

  • 김주희;김아영;박노창;하정원;이상권;홍원식
    • Journal of Welding and Joining
    • /
    • 제32권6호
    • /
    • pp.75-81
    • /
    • 2014
  • Usage of heavy metal element (Pb, Hg and Cd etc.) in electronic devices have been restricted due to the environmental banning of the European Union, such as WEEE and RoHS. Therefore, it is needed to develop the Pb-free solder plated ribbon in photovoltaic (PV) module. This study described that degradation characteristics of PV module under damp heat (DH, $85^{\circ}C$ and 85% R.H.) condition test for 1,000 h. Solar cell ribbons were utilized to hot dipping plate with Pb-free solder alloys. Two types of Pb-free solder plated ribbons, Sn-3.0Ag-0.5Cu (SAC305) and Sn-48Bi-2Ag, and an electroless Sn-40Pb solder hot dipping plated ribbon as a reference sample were prepared to evaluate degradation characteristics. To detect the degradation of PV module with the eutectic and Pb-free solder plated ribbons, I-V curve, electro-luminescence (EL) and cross-sectional SEM analysis were carried out. DH test results show that the reason of maximum power (Pm) drop was mainly due to the decrease fill factor (FF). It was attributed to the crack or oxidation of interface between the cell and the ribbon. Among PV modules with the eutectic and Pb-free solder plated ribbon, the PV module with SAC305 ribbon relatively showed higher stability after DH test than the case of PV module with Sn-40Pb and Sn-48Bi-2Ag solder plated ribbons.