• 제목/요약/키워드: Cu Ion

검색결과 1,121건 처리시간 0.042초

용융법에 의한 수용성 유리의 제조 및 특성(II) : 용해 특성, 살균 효과 및 세포 독성 (Preparation and Characterization of Water-Soluble Glass Through Melting Process(II) : Dissolution Characteristics, Bactericidal Effects and Cytotoxicity)

  • 오승한;조종호;최세영;오영제
    • 한국세라믹학회지
    • /
    • 제34권1호
    • /
    • pp.13-22
    • /
    • 1997
  • 은 이온과 구리 이온을 동시에 함유하는 살균용 인산염계 수용성 유리를 용융법으로 제조하였다. 분말상의 유리 시편을 상온의 증류수에 넣어 조성과 시간에 따른 용해 특성을, bulk상 시편에 대해서는 용해 전.후의 표면변화를 각각 관찰하였고, 살균 효과 및 세포독성을 평가하였다. 은 이온:구리 이온=1:1인 조성에서 최대 용해량을 나타내었으며 용해거동은 초기부터 total dissolution이 지배적이었다. 시간의 경과에 따라 용해는 진행이 되지만, 표면에 생성되는 새로운 층은 관찰되지 않았다. Pseudomonas sp, e. coli, staphylococcus aureus, 및 salmonella균에 대한 살균 효과는 용해량의 증가에 따라 증가하여 우수한 살균효과를 나타내었다. L929 세포에 대한 독성 실험 결과, 은 이온의 농도가 10ppm이상에서만 독성을 나타내었다.

  • PDF

Development of a New Copper(II) Ion-selective Poly(vinyl chloride) Membrane Electrode Based on 2-Mercaptobenzoxazole

  • Akhond, Morteza;Ghaedi, Mehrorang;Tashkhourian, Javad
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권6호
    • /
    • pp.882-886
    • /
    • 2005
  • Copper(II) ion-selective PVC membrane electrode based on 2-mercaptobenzoxazole as a new ionophore and o-nitrophenyl octyl ether (o-NPOE) as plasticizer is proposed. This electrode revealed good selectivity for $Cu^{2+}$ over a wide variety of other metal ions. Effects of experimental parameters such as membrane composition, nature and amount of plasticizer, and concentration of internal solution on the potential response of $Cu^{2+}$ sensor were investigated. The electrode exhibits good response for $Cu^{2+}$ in a wide linear range of 5.0 ${\times}$ 10−.6-1.6 ${\times}$ $10^{-2}$ mol/L with a slope of 29.2 ${\pm}$ 2.0 mV/decade. The response time of the sensor is less than 10 s, and the detection limit is 2.0 ${\times}$ $10^{-6}$ mol/L. The electrode response was stable in pH range of 4-6. The lifetime of the electrode was about 2 months. The electrode revealed comparatively good selectivities with respect to many alkali, alkaline earth, and transition metal ions.

이온빔의 공정변수에 따른 Cu/Polyimide 박막의 접착력향상에 관한 연구 (A Study on the Improvement of Adhesion according to the Process Variables of Ion Beam in the Cu/Polyimide Thin Film)

  • 신윤학;김명한;최재하
    • 한국재료학회지
    • /
    • 제15권7호
    • /
    • pp.458-464
    • /
    • 2005
  • In microelectronics packaging, the reliability of the metal/polymer interfaces is an important issue because the adhesion strength between dissimilar materials is often inherently poor. The modification of polymer surfaces by ion beam irradiation and rf plasma is commonly used to enhance the adhesion strength of the interface. T-peel strengths were measured using a Cu/polyimide system under varying $N_2^+$ ion beam irradiation conditions for pretreatment. The measured T-peel strength showed reversed camel back shape regarding the fixed metal-layer thickness, which was quite different from the results of the 90° peel test. The elementary analysis suggests that the variation of the T-peel strength is a combined outcome of the plastic bending work of the metal and polymer strips. The results indicate that the peel strength increases with $N_2^+$ ion beam irradiation energy at the fixed metal-layer thickness.

이온빔에 의한 Cu/Polyimide 표면개질에 따른 접착력향상에 관한 연구 (A Study on the Improvement of Adhesion according to the Surface Modification of Cu/Polyimide Films by ion Beam Irradiation)

  • 신윤학;추준식;이승우;정찬회;김명한
    • 한국재료학회지
    • /
    • 제15권1호
    • /
    • pp.42-46
    • /
    • 2005
  • In microelectronics packaging, the reliability of the metal/polymer interfaces is an important issue because the adhesion strength between dissimilar materials is often inherently poor. The modification of polymer sufaces by ion beam irradiation and rf plasma are commonly used to enhance the adhesion strength of the interface. T-peel strengths were measured using a Cu/polyimide system under varying $Ar^+$ ion beam irradiation pretreatment conditions. The measured T-peel strength showed reversed camel back shape regarding the fixed metal-layer thickness, which was quite different from the results of the $90^{\circ}$ peel test. The elementary analysis suggests that the variation of the T-peel strength is a combined outcome of the plastic bending work of the metal and polymer strips. The results indicate that the peel strength increases with $Ar^+$ ion beam irradiation energy at the fixed metal-layer thickness.

구리-아연 합금사의 산화-환원 반응을 통한 Microcystis aeruginosa의 사멸 특성에 관한 연구 (A Study on the Antimicrobial Activity of Microcystis aeruginosa by Redox Reaction of Cu-Zn Alloy Metal Fiber)

  • 송주영;김희선;이상호;김종화;박근호
    • 한국응용과학기술학회지
    • /
    • 제25권2호
    • /
    • pp.168-174
    • /
    • 2008
  • This study is focused on the antimicrobial activity of cyanobacteria Microcystis aeruginosa by the reduction and oxidation reaction of copper and zinc alloy metal fiber filter. Cu/Zn ion is easily makes radicals with molecular hydroperoxide. Especially, hydroperoxide radical shows strong toxicity to the strains. Plasma membrane causes conformational change when hydroperoxide radical binds to plasma membrane. Elution of copper ion from copper and zinc alloy metal fiber is detected in the cyanobacteria solution as 0.5 ppm, and that of zinc ion is 0 ppm respectively. Zinc ion is figured to form a hydroxide in the cyanobacteria solution and precipitated to form a sludge. The concentration of chlorophyll-a in the cyanobacteria solution was proved to be the index of antimicrobial level of Microcystis aeruginosa.

Cu-Zn 금속합금의 산화 환원반응과 Al-Silicate의 흡착반응을 이용한 폐수 중 중금속처리에 관한 연구 (A Study on the Treatment of Heavy Metal in Wastewater by Redox Reaction of Cu-Zn Metal Alloy and Adsorption reaction of Al-Silicate)

  • 이수정;김종화;송주영
    • 한국응용과학기술학회지
    • /
    • 제33권3호
    • /
    • pp.441-448
    • /
    • 2016
  • 본 연구는 구리 아연 금속합금의 산화 환원 반응과 합성 알루미늄 실리케이트의 흡착 반응을 이용한 폐수 중 중금속 처리에 관한 연구이다. 극세사 형태로 제조된 구리 아연 금속합금이 수용액 중에서 산화 환원반응에 의해 아연보다 이온화 경향이 작은 중금속은 환원 처리되고, 이온화 된 아연 및 미반응 중금속은 흡착 처리하여 제거하는 연구이다. 극세사 형태로 제조된 금속합금 물질은 표면적이 커서 1회 처리만으로도 반응 평형에 도달하게 하여 효율이 높은 것으로 나타났다. 크롬($Cr^{+3}$)은 redox 반응 1회 처리만으로도 100.0 % 제거 되었으며, 수은은 98.0 %, 주석 92.0 %, 구리는 91.4 % 정도 제거되었다. 카드뮴, 니켈, 납도 각각 40.0 %, 50.0 %, 58.0 %가 제거 되었다. 크롬($Cr^{+3}$)은 아연과 이온화 경향 차이가 거의 없지만 제거 효율이 높은 것으로 나타났는데 이는 3가 크롬은 이온 상태로 존재하면 redox 반응에서 발생한 $OH^-$ 이온과 결합하여 수산화물 침전을 형성하는 것으로 판단된다. Redox 반응 후 증가한 아연 및 미반응 중금속 농도를 알루미늄실리케이트를 1회 통과하여 거의 100.0 % 제거할 수 있었다. 이는 합성 알루미늄 실리케이트의 비표면적이 크고 금속 이온의 흡착능력이 우수한 것으로 나타났으며, 반응 후 알루미늄 이온은 증가하지 않는 것으로 보아 이온 교환이 아닌 흡착으로 아연 및 중금속 이온들을 제거할 수 있는 것으로 나타났다.

Cu/polyimide 계면에서의 화학반응 (Chemical reaction at Cu/polyimide interface)

  • 이연승
    • 한국결정성장학회지
    • /
    • 제7권3호
    • /
    • pp.494-503
    • /
    • 1997
  • Polyimide(PI)위에서 Cu의 초기 성장과정을 설명하기 위해, PI 위에 Cu를 조금씩 증착시키면서 그리고 PI 위에 Cu 층을 쌓아놓고 이 Cu 층을 $Ar^+$ 이온으로 깍아내면서 계면에서의 변화를 XPS를 이용하여 비교ㆍ관측하였다. 상온에서 PI위에 Cu를 조금씩 증착하면서 관측하였을 때, 그 성장과정에 따르는 phase의 변화는 Cu-N-O complex에서 $Cu_2O$ phase로, 그리고 metallic Cu 순으로 성장하는 것이 관측되었다. 반면에 PI위에 증착되어 있는 Cu를 조금씩 깎아내면서 관측하였을 때, metallic Cu가 $Ar^+$ 이온으로 깍아내어 polyimide와의 계면에 도달하게 되었을 때에는 Cu$_2$O phase로서 관측되었다. 이상의 결과로부터, in-situ로 Cu를 조금씩 올리면서 계면을 조사하는 것과 Cu를 증착시킨 후, 깍으면서 계면을 조사하는 것과는 다른 결과를 얻게 된다는 것을 알 수 있었다.

  • PDF

이온 빔 스퍼터법으로 제작한 BiSrCaCuO 초전도 박막의 상안정 영역 (Phase Stability Region of BiSrCaCuO Superconduction Thin Films Fabricated by Ion Beam Sputtering Method)

  • 양승호;박노봉;박용필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
    • /
    • pp.49-52
    • /
    • 2003
  • BiSrCaCuO superconducting thin films have been fabricated by co-deposition using IBS(Ion Beam Sputtering) method. Despite setting the composition of thin film Bi2212 or Bi2223, in both cased, Bi2201, Bi2212 and Bi2223 phase were appeared. It was confirmed the obtained field of stabilizing phase was represented in the diagonal direction of the right below end in the Arrhenius plot of temperature of the substrate and $PO_3$ and it was distributed in the reeone.

  • PDF

Synthesis and Characterization of 14-Membered Tetraaza Macrocycles with N-Ethyl Groups and their Nickel(Ⅱ) and Copper(Ⅱ) Complexes

  • Kang Shin-Geol;Kweon Jae Keun
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권3호
    • /
    • pp.256-259
    • /
    • 1992
  • The 14-membered tetraaza macrocyclic ligand 1,8-diethyl-5,12-dimethyl-1,4,8,11-tetraazacyclote tradeca-4,11-diene(B) can be synthesized as its dihydroperchlorate salt by the one-pot reaction of 2-ethylaminoethylamine, methylvinyl ketone, and perchloric acid in absolute ethanol. The reaction of Ni(II) or Cu(II) ion and the salt yields $[M(B)]^{2+}$ (M = Ni(II) or Cu(II)), which reacts with $NaBH_4$ to produce $[M(D)]^{2+}$ (D = 1,8-diethyl-5,12-dimethyl-1,4,8,11-tetraazacyclote tradecane). The complexes $[M(L)]^{2+}$ (L = B or D) have planar geometry and contain two ethyl groups at the donor nitrogen atoms of the ligands. The red solids $[Cu(B)](X)_2(X)$ = $ClO_4-$ or $PF_6^-$) react with water molecules of atmospheric moisture to produce the purple solids in which water molecules are coordinated to the metal ion. Synthesis, characterization, and the properties of the new N-ethylated macrocyclic ligands and their Ni(II) and Cu(II) complexes are reported.

$Cu^{++}-Catalyzed$ Peroxidation이 Collagen Gelation에 미치는 영향 (Effects of $Cu^{++}-Catalyzed$ Peroxidation on Collagen Gelation)

  • 정명희;김명석;이정수
    • 대한약리학회지
    • /
    • 제19권2호
    • /
    • pp.35-44
    • /
    • 1983
  • reactive oxygen species에 의해 나타나는 reactivity에 있어서 metal ions이 관여함이 시사되고 있다. 이미 알려진 reactive oxygen species와 metal ions의 상호작용 이외에 특히 $Cu^{++}$$H_2O_2$가 강력한 peroxidative action을 나타낸다는 사실이 알려져 있으며 $Cu^{++}-H_2O_2$가 biological system 에서의 조직파괴에 관여할 가능성이 저자들에 의해서 효소 및 조직치 구조 단백질의 gradation 효과를 관찰함으로써 시사되었다. 본 연구는 $H_2O_2$ 혹은 $H_2O_2$를 생성하는 효소계(xanthine과 xanthine oxidase 및 glucose과 glucose oxidase)에 $Cu^{++}$을 첨가하여 $Cu^{++}-H_2O_2$에 의한 peroxidation의 효과를 collagen gelation을 통하여 확인코저 수행하였으며 다음과 같은 결과를 얻었다. 1) $Cu^{++}(20\;{\mu}M)$$H_2O_2$에 의하며 collagen gelation은 현저히 억제되었으며 이같은 억제효과는 양자의 농도에 비례하였다. 2) $Cu^{++}-H_2O_2$ reactivity를 확인하는 다른 방법으로 glucose oxidase system를 이용하였다. glucose oxidase$(2.5{\mu}g/ml)$ 와 glucose(0.5 mM)는 collagen gelation에 영향을 미치지 않았으나 이에 $Cu^{++}$이 존재하면 gelation이 억제되었다. 이때 억제정도는 $glucose(0.125{\sim}l.25\;mM)$$Cu^{++}$의 농도에 비례하였다. 3) 여러 reactive oxygen species 가운데 $Cu^{++}-H_2O_2$ reactivity를 xanthine oxidase system을 이용하여 확인하였다. (a) collagen gelation은 xanthine oxidase(30 munits/ml)와 xanthine$(0.25{\sim}2\;mM)$에 의하여 억제되었다. (b) 이때 나타나는 collagen gelation의 억제는 superoxide dismutase에 의하여 완전히 회복되었으나 catalase에 의해서는 더욱 촉진되었다. 그러나 catalase에 의한 억제효과의 촉진은 1,4-diazabicyclo(2,2,2)octane에 의하여 완전히 소실되었다. 따라서 이 xanthine oxidase system에서는 $O_2-,\;H_2O_2,\;^1O_2$이 관여함을 알 수 있었다. (c) 그러나 $Cu^{++}(10\;{\mu}M)$이 존재하였을 때 collagen gelation은 superoxie dismutase에 의해 더욱 억제되었고 catalase에 의해서는 완전히 회복되었다. xanthine oxidase계에서 얻어진 결과는 여러 reactive oxygen species가운데 $H_2O_2$$Cu^{++}$에 의하여 peroxidation효과를 나타냄을 알 수 있었다. 이상의 결과로 미루어 볼 때 reactive oxygen species와 metal ions과의 상호작용 가운데 $Cu^{++}-H_2O_2$는 강한 반응을 나타내는 특이한 구성요소이고 헌재 시사되고 있는 reactive oxygen species의 biological effects에 비추어 $Cu^{++}-catalyzed peroxidation$도 병적상태에서 생체에 유해한 작용을 나타내는 요소임을 시사하며 특히 염증시 조직파괴역할에 관하여 고찰하였다.

  • PDF